Teamac Zinc Rich Primer

    438/P201/252
    TEA506

    Teamac Zinc Rich Primer, contains a very high concentration of metallic zinc and allows conductivity in the dried film. The zinc coating gives cathodic protection and is a form of cold galvanising. 

    • Cold galvanises metal
    • Protects against corrosion
    • Use on iron and steel

    Coverage Calculator

    Colour
    Size
    Finish

    £43.56 (incl. VAT)

    £36.30 (ex. VAT)

    Quantity
    Please choose your colour
    In Stock and Available for Delivery (See Delivery Options Below)

    Description

    Teamac Zinc Rich Primer,contains a very high concentration of metallic zinc and allows conductivity in the dried film.  The zinc coating gives cathodic protection and is a form of cold galvanising.  Teamac Zinc Rich Primer is suitable for iron and steel to protect against corrosion.

    The coating must be in direct contact with the iron or steel to work correctly.



    Click To Jump To Section:




    Features & Benefits




    Product Specification


    Technical Data
    Volume Solids56.8%
    VOC Content381 g/litre
    SG2.99 @ 20°C
    Viscostity8 Poise @ 25°C
    Flash Pointabove 32°C (closed cup)



    Film Thickness Range And Coverage


    Product Data
     Dry Film ThicknessWet Film ThicknessTheoretical Coverage
    Maximum38 μm100 μm
    • 8 m2/litre 70 micron D.F.T. (Airless spray application)



    The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



    Drying Times


    Drying Times At 20°C/RH 50%
    Touch Dry:30 Mins
    Dry To Handle:8 Hours
    Dry To Recoat:8 hours or overnight
    Fully Cured:N/A



    Low temperature and high humidity will adversely affect application, drying and performance of any coating.



    Surface Preparation


    • Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
    • Bare steel should be free from dust, rust and scale.
    • Blast cleaning to SA 2½ is recommended.
    • If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
    • Any oil or grease should be removed with solvent before de-rusting.
    • Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts welds, etc.
    • Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.



    Preceeding Coat


    • Apply direct to prepared iron and steel.



    Subsequent Coat




    Mixing


    • Mix well before use.



    Application Conditions


    • As dictated by normal good painting practice.
    • In confined spaces, provide adequate ventilation during application and drying.
    • Must be applied in direct contact with the iron or steel to be affective.



    Application Methods


    MethodAirless SprayConventional SprayBrushRoller
     YesNoYesNo



    • Thinner (Max vol): Brush: Thinners 15 (5%) - Airless Spray: Thinners 16 (5%)
    • Nozzle Size: 0.017" - 0.021"
    • Nozzle Pressure: 1800 to 2000 psi
    • Cleaning Solvent: Thinners 15 or 16.



    Health & Safety


    See safety data sheet - SDS 10733

    Click to go back to the top of the page

    Product Details
    506-947247

    Data sheet

    Manufacturer
    Teamac
    For Use By
    Consumer Use
    Water / Solvent Based
    Solvent
    For Use On
    Iron
    Steel
    Application Method
    Brush
    Airless Spray
    Sheen
    Matt
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Single
    Pack Size
    1L, 2.5L, 500ml
    Dry to Handle (at 20°C)
    8 Hours
    Dry to Recoat (at 20°C)
    8 hours or overnight
    Coverage
    8m² per litre
    Solids by Volume
    56.8%
    VOC
    381 g/litre
    Touch Dry
    30 mins
    Size
    0.5 litre, 1 litre and 2.5 litre
    Recommended Dry Film Thickness
    38 μm
    Recommended Wet Film Thickness
    100 μm
    UN Number
    UN1263
    Base Type
    Solvent-Based
    Suitable For Use On
    Steel
    Suitable For Use On
    Iron
    Finish
    Matt
    Application Method
    Spray
    Application Method
    Brush
    Application Method
    Airless Spray
    Manufacturer
    Teamac
    Components
    1K
    Usages
    Cathodic Protection
    Usages
    Anti-Corrosive
    Usages
    Metal Primers & Undercoats
    Usages
    Atmospheric
    Usages
    Zinc Rich /Cold Galvanising
    Product Usage Type
    Primer
    Product Range
    Zinc
    Fastest Delivery
    Next Working Day
    Colour Family
    Grey
    Dry to Recoat (@ 20-25°C)
    8 hours
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Teamac Zinc Rich Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    COVERAGE CALCULATOR
    Units
    Application
    Total area²
    Or enter length and width dimensions:
    Length
    Width

    *All estimates are based on theoretical consumption rates and do not take into account any substrate deviations or wastage. See below for DFT rates.

    You might also like

    Teamac Thinner 16

    A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.Suitable for application by Brush, Roller or Spray.  Teamac Thinner 16 can also be used for the cleaning of some surfaces prior to application of the coating. Suitable for cleaning of the...

    Price £11.68 (ex. VAT)

    £14.02 (incl. VAT)

    £11.68 (ex. VAT)

    In Stock and Available for Delivery

    Teamac Thinner 15

    A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.Suitable for use with Brush, Roller or Spray. Teamac Thinner 15 can also be used for the cleaning of some surfaces prior to application of the coating. Can be use for cleaning of...

    Price £27.46 (ex. VAT)

    £32.95 (incl. VAT)

    £27.46 (ex. VAT)

    In Stock and Available for Delivery

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)

    £12.04 (incl. VAT)

    £10.03 (ex. VAT)

    In Stock and Available for Delivery

    Teamac Zinc Phosphate Primer

    Teamac Zinc Phosphate Primer, an anticorrosive primer on iron and steel, for use with a range of conventional topcoats such as Teamac Marine Gloss and Teamac Metalcote Plant Enamel. Can be used for:Marine purposes Fire escapes Metal gates Metal garage doors Ideal in coastal areas Click to jump down to Technical DataCoverage...

    Price £14.83 (ex. VAT)

    £17.80 (incl. VAT)

    £14.83 (ex. VAT)

    In Stock and Available for Delivery

    Surface Preparation Kits for Steel

    These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...

    Price £21.53 (ex. VAT)

    £25.84 (incl. VAT)

    £21.53 (ex. VAT)

    In Stock and Available for Delivery