"

Rust-Oleum 1060/1080 High Build Metal Primer

Rust-Oleum 1060 High Build Primer View larger
Typical Coverage (per coat)9m² per litre
Touch Dry4 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Rust-Oleum 1060/1080 High Build Metal Primer is for extra protection of bare or blasted metal, offers maximum durability under severely corrosive conditions. It assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum metal primer followed by Rust-Oleum 7500 Alkythane.

Read Full Description

More details

£86.96 + VAT

Rust-Oleum 1060/1080 High Build Metal Primer is for extra protection of bare or blasted metal, offers maximum durability under severely corrosive conditions. Should be used on new, blasted steel surfaces or on surfaces primed with Rust-Oleum metal primers. Rust-Oleum 1060/1080 High Build Metal Primer assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum metal primer followed by Rust-Oleum 7500 Alkythane.

Features & Benefits

  • Protects up to C4 corrosion class with Rust-Oleum 7500 Alkythane topcoat
  • High build primer (60 micron)
  • High content of rust-inhibiting pigments
  • Lasting flexibility
  • Tintable in virtually any colour

PLEASE NOTE: Colours in this product are intended for use to improve coverage and performance of the compatible topcoats ONLY. Mixed RAL colours in this product will NOT be accurate, they simply provide a suitable base for the same RAL colour topcoat to be applied.

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 μm. Sand previous coatings which are in good condition to roughen the surface slightly. The surface must be clean and dry during application.

Application Conditions

Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.

Application & Thinning

BRUSH
Up to 10 vol. %; Rust-Oleum Thinner 633.
Use natural bristles, longhair brushes.

ROLLER
Up to 10 vol. %; Rust-Oleum Thinner 633.
Use medium nap, polyamide (perlon 8 -14 mm) rollers. Roller application may require 2 coats to achieve recommended dry film thickness.

AIRLESS SPRAY
Up to 20 vol.%; Rust-Oleum Thinner 641.
Pneumatic and electric airless equipment. Tip size: 0.013-0.015 inch. Fluid pressure: 130 - 200 bar. Check wet film thickness, avoid excessive film thickness.

AIR-ATOMISED SPRAY
10-20 vol.%; Rust-Oleum Thinner 641.
Gravity cup and pressure cup. Tip size: 1.4 -2.2 mm. Atomizing pressure: 2 - 4 bar.

Technical Data

Density: 1.37 kg/l
Gloss Level: Matt
Corrosion Class: C4 high protection
Solids content in volume: 53.5%
Heat Resistance: 120°C (dry heat)

Drying Times at 20°C/RH 50%

Touch dry: 4 h
Dry to handle: 8 h
Dry to recoat: After 24 hours
Fully cured: 8 days

Theoretical Consumption

9m² per litre (105 μm WFT, 60 μm DFT)

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

1060/1080 HB Metal Primer TDS

Download

1060/1080 HB Metal Primer MSDS

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.