Rust-Oleum 9169 Epoxy Rust Primer

Rust-Oleum 9169 Epoxy Rust Primer is a low viscous epoxy rust-primer with outstanding adhesion and corrosion protection for manually derusted metals. Rust-Oleum 9169 Epoxy Rust Primer is designed for application on manually prepared rusted steel surfaces and can be recoated with 9100 topcoats, offering the appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and frequent chemical cleaning; high humidity and moist conditions.

Features & Benefits

• For Professional use
• Applied directly to manually de-rusted steel.
• Avoids costly surface preparation
• Basis for long-lasting protection
• Easy mixing (1:1 ratio)
• Penetrates through rust onto sound metal
• Economic alternative for blasting
• Active corrosion control
• Easy to apply by brush, roller or spray

Technical Data

• Density: 1,34
• Gloss Level: Gloss
• Corrosion Class: C4 high protection
• Solids content in volume: 58,5 %
• Heat Resistance: 150°C (dry heat)
• Mixing Ratio: 1 : 1 (Volume)

Drying Times At 20°C/RH 50%

• Touch dry: 2 hours
• Dry to handle: 4 hours
• Dry to recoat: After 16 hours, but within 72 hours
• Fully cured: 8 days
• Pot Life: 4 hours for a 5 ltr. mix at 20°C
• Induction Time: 1 hour

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Remove loose rust, mill scale and deteriorated coatings by hand or power tool cleaning to St 2/3 (ISO 8501-01 : 1988). Large areas may be brush-off blasted to Sa 2 (ISO 8501-01 : 1988), blast profile max. 50 µm. Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly, check compatibility. The surface must be clean and dry during application.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.