Rust-Oleum Mathys Pegalink Universal Adhesion Primer is a water based primer for indoor and outdoor use. Adheres to many surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanised steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Rust-Oleum Mathys Pegalink Universal Adhesion Primer is a water based primer for indoor and outdoor use. Adheres to many surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanised steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc.
± 10 m²/l
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Adhesion cross-cut intact on the above-mentioned surfaces. In case of doubt, f.i. on a substrate which has not been mentioned, an adhesion test has to be done after 2 days of drying, especially on old paints.
Further preparation and application instructions can be found on the product data sheet.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Tom Lane on 2022-07-21 11:31:26 | Question: Hello, we have galvanized steel roof sheeting that has been in-situ for 4 years, some rust has formed but not a lot, it is well weathered generally. Would it be better to use the Pagmalink rather than a conventional etch primer before applying Mathys Noxyde as the top coat. I understand Manthys is a direct to metal paint, but I do not want to cut any corners. |
Answer from Rawlins’ Technical Team: Pegalink is required on new galvanised steel, it will not be required on weathered galvanised steel. But before application of Rust-Oleum Mathys Noxyde the roof sheeting must be clean, dry, sound and prepared as detailed in the technical data sheet including removal of any rust. | |
| Brian Jones on 2021-09-26 08:33:17 | Question: I'm looking to paint a brick wall built of hard shiny finished engineering brick and rough rustic bricks. Is this product suitable? Thanks |
Answer from Rawlins’ Technical Team: Pegalink is designed to adhere to smooth surfaces that would be usually difficult to paint such as the shiny finished engineering bricks. But this would be no use on rough bricks, we would recommend consulting the Technical Data sheet of the chosen topcoat to ascertain what preparation these bricks may require. | |
| D on 2019-06-13 09:57:59 | Question: Hi I have had ongoing problems with rust reoccurring on a the interior and exterior of an older vehicle. VW T25 I have recently used Zinga (basically pure zinc) over the areas I have been able to removed the majority of the surface rust from. Pegalink is recommended as the primer over this Zinga. Can I then use conventional auto paints over this or other spirit based ones. We are not talking perfect vintage restoration finish but an acceptable standard to prolong its working life. Many Thanks |
Answer from Rawlins’ Technical Team: The Rust-Oleum Mathys Pegalink data sheet recommends allowing 24 hours before overcoating with waterborne paints - Decorative alkyd lacquers should be checked first by means of an adhesion test. | |
| M Richardson on 2018-05-03 11:16:01 | Question: I wish to roller apply paint to entire side lower panels of single decker PSV bus (Scania Omnicity). Currently painted with professsionally applied metalic paint + some kind of gel coat (probably polyeurothane type) Question; would this work: SURFACE PREP: sand down + prime any bare metal with aluminium primer. UNDERCOAT: Rustoleum Mathys Pegalink undercoat. TOPCOAT: Rustoleum 9200 polyeurothane water soluable topcoat be appropriate? Thank you, Martin. |
Answer from Rawlins’ Technical Team: In principle your proposal sounds OK (could also consider Rust-Oleum Mathys Metal Cladding Primer in lieu of Pegalink), but we would ideally like to know more about the proposed aluminium primer before confirming. | |
| Gazi on 2015-08-06 22:10:11 | Question: What primer could I use on rusted steel without having to sand down the rust? |
Answer from Rawlins’ Technical Team: Coo-Var Rust Converter will turn any rust on the substrate into a stable surface allowing you to then be able to coat the substrate without the risk of any further corrosion. | |
Rust-Oleum Mathys Pegalink Universal Adhesion Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Mathys Pegagraff Hydro is a clear coating designed to protect a range of bare and previously painted surfaces inside and out from graffiti attack. Can be used on floors, walls and other surfaces to create a tough, clear glaze that can be easily and frequently cleaned to remove any unwanted graffiti that may occur.Colourless anti-graffiti...
£132.05 (incl. VAT)
£110.04 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
