"

Rust-Oleum 569/580 Quick Drying Metal Primer

Rust-Oleum 569 Quick Drying Primer View larger
Typical Coverage (per coat)12.8m² per litre
Touch Dry1 Hour
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Rust-Oleum 569/580 Quick Drying Metal Primer is a single pack quick drying metal primer for bare and lightly rusted metal. It should be used on new, blasted or slightly rusted steel surfaces. Depending on the exposure conditions, it can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection.

Read Full Description

More details

£19.16 + VAT

Rust-Oleum 569/580 Quick Drying Metal Primer is a single pack quick drying metal primer for bare and lightly rusted metal. Rust-Oleum 569/580 Quick Drying Metal Primer should be used on new, blasted or slightly rusted steel surfaces. Depending on the exposure conditions Rust-Oleum 569/580 Quick Drying Metal Primer can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection; e.g. at heavy industrial exposures a two-coat system of Rust-Oleum 569/580 Quick Drying Metal Primer and Rust-Oleum 9100 High Performance Epoxy; at light industrial exposures Primer Rust-Oleum 1060/1080 High Build Metal Primer and/or a second coat followed by Rust-Oleum 7500 Alkythane.

Features & Benefits
  • Recoatable after just 2 hours
  • Durable anti-corrosion system in just one day
  • Excellent flow
  • Tintable in virtually any colour
  • Increases life expectancy of the Alkythane topcoat
PLEASE NOTE: Colours in this product are intended for use to improve coverage and performance of the compatible topcoats ONLY. Mixed RAL colours in this product will NOT be accurate, they simply provide a suitable base for the same RAL colour topcoat to be applied.

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 µm. If blasting is not possible remove loose rust and loose coatings by scraping and/or wire brushing to St 3 (ISO 8501-1 : 1988). Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly. The surface must be clean and dry during application.

Application Conditions
Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.

Application & Thinning

BRUSH
Dilute up to 10 vol. %; Rust-Oleum Thinner 633.
Use natural bristles, long hair brushes. Brush application may require 2 coats to achieve recommended dry film thickness.

ROLLER
Dilute up to 10 vol. %; Rust-Oleum Thinner 633.
Use medium nap, perlon 8-12 mm. rollers. Roller application may require 2 coats to achieve recommended dry film thickness.

AIRLESS SPRAY
If required up to 5 vol. % Rust-Oleum Thinner 641.
Pneumatic and electric airless equipment. Tip size: 0.013-0.015 inch. Fluid pressure: 130 - 200 bar.

AIR-ATOMISED SPRAY
10-20 vol.%; Rust-Oleum Thinner 641.
Gravity cup and pressure cup. Tip size: 1.2 -1.8 mm. Atomizing pressure: 2 - 4 bar.

Technical Data

Density: 1.2 kg/l
Gloss Level: Matt
Corrosion Class: C3 average protection
Solids content in volume: 44.8%
Heat Resistance: 120 °C (dry heat)

Drying Times at 20°C/RH 50%

Touch dry: 1 h
Dry to handle: 2 h
Dry to recoat: After 2 hours
Fully cured: 8 days

Theoretical Consumption
12.8m² per litre (80 µm WFT, 35 µm DFT)

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

569/580 QD Metal Primer TDS

Download

569/580 QD Metal Primer MSDS

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.