Teamac All Metals Primer
    • Teamac All Metals Primer

    Teamac All Metals Primer

    516/W201/703/E
    TEA791

    Teamac All Metals Primer, is a water thinnable, general purpose metals primer which has very good anti-corrosive properties suitable for priming most metals including iron, steel, aluminium, brass, copper and more.

    • Application: Brush, Roller, Airless Spray
    • Finish: Matt
    • Coverage: 12 Square Metres Per Litre
    • Suitable For: Metals
    • Drying Times: Touch Dry: 1.5 hours Hard Dry: 4 hours
    • Click to jump down to Technical Data

    Colour
    Size
    Finish

    £43.43 (incl. VAT)

    £36.19 (ex. VAT)

    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Teamac All Metals Primer, is a water thinnable acrylic metals primer which has very good anti-corrosive properties.  Teamac Water Based All Metals Primer is a general purpose metals primer, suitable for priming most metals including iron, steel, aluminium, brass, copper and more.



    Click To Jump To Section:




    Features & Benefits


    • Application: Brush, Roller, Airless Spray
    • Finish: Matt
    • Coverage: 12 Square Metres Per Litre
    • Suitable For: Metals
    • Drying Times: Touch Dry: 1.5 hours Hard Dry: 4 hours
    • Click to jump down to Technical Data



    Product Specification


    Technical Data
    Volume Solids27%
    VOC ContentMax 47 g/litre
    SG1.15 @ 20°C
    Viscostity2.7 Poise @ 25°C
    Flash PointNon-flammable



    Film Thickness Range And Coverage


    Product Data
     Dry Film ThicknessWet Film ThicknessTheoretical Coverage
    Maximum20 to 25 μm85 μm12 m2/litre @ 25 micron D.F.T.



    The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



    Drying Times


    Drying Times At 20°C/RH 50%
    Touch Dry:1.5 Hours
    Dry To Handle:4 Hours
    Dry To Recoat:6 Hours
    Fully Cured:3 - 5 Days



    Low temperature and high humidity will adversely affect application, drying and performance of any coating.



    Surface Preparation


    • Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
    • Bare steel should be free from dust, rust and scale.
    • Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
    • Any oil or grease should be removed with CooVar Degreaser before de-rusting.
    • Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc.
    • Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.



    Preceeding Coat


    • N/A



    Subsequent Coat




    Mixing


    • Mix well before use.



    Application Conditions


    • Do not paint when temperature will be at or below 7°C during the painting and drying process as dictated by normal good painting practice.
    • Care must be taken during application that the temperature is above the dew point to avoid any contamination.
    • In confined spaces, provide adequate ventilation during application and drying.

    Application Methods


    MethodAirless SprayConventional SprayBrushRoller
     YesNoYesYes



    • Thinner (Max vol): Clean Water (5%)
    • Nozzle size: 0.015"
    • Nozzle pressure: 1800 to 2000 psi
    • Cleaning solvent: Clean Water



    Health & Safety


    See safety data sheet - SDS 11143 in the attachements section above.

    Click to go back to the top of the page

    Product Details
    791-182044

    Data sheet

    Manufacturer
    Teamac
    Water / Solvent Based
    Water
    For Use On
    Iron, Steel, Aluminium, Brass, Copper
    Application Method
    Brush, Roller, Airless Spray
    Sheen
    Matt
    Colour
    Standard / Ready Mixed
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Single
    Pack Size
    1L, 2.5L
    Touch Dry (at 20°C)
    1.5 Hours
    Dry to Handle (at 20°C)
    4 Hours
    Dry to Recoat (at 20°C)
    6 Hours
    Fully Cured (at 20°C)
    3 - 5 Days
    Coverage
    12 m2/litre @ 25 micron D.F.T.
    Recommended Thinner/Cleaner
    Clean Water
    Compatible Topcoats
    Teamac Marine Gloss, Teamac Metalcote Plant Enamel
    Min. Application Temperature
    Do not paint when temperature will be at or below 7 °C
    Solids by Volume
    27%
    VOC
    Max 47 g/litre
    Size
    0.5 litre, 1 litre, 2.5 litre
    Recommended Dry Film Thickness
    20 to 25 μm
    Recommended Wet Film Thickness
    85 μm
    UN Number
    Not regulated
    Base Type
    Water-Based
    Base Type
    Acrylic
    Suitable For Use On
    Iron
    Suitable For Use On
    Aluminium
    Suitable For Use On
    Copper
    Suitable For Use On
    Brass
    Suitable For Use On
    Steel
    Finish
    Matt
    Application Method
    Brush
    Usages
    Atmospheric
    Usages
    Anti-Corrosive
    Product Usage Type
    Primer
    Colour Family
    Red
    Dry to Recoat (@ 20-25°C)
    6 hours
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Paul on 2022-05-27 16:19:16
    Question: 

    Can Teamac all metals primer be used on galvanized steel (hot zinc dipped) ?

    Answer from Rawlins’ Technical Team: 

    Yes this primer can be used on prepared galvanised steel, that is cleaned and degreased.


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Teamac All Metals Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Teamac Metalcote Plant Enamel

    Teamac Metalcote Plant Enamel, is a tough, flexible enamel paint with an attractive gloss finish and excellent durability. It has good resistance to lubricating, mineral oils, many common industrial chemicals and heat.Good resistance to oils, chemicals and heat Ideal for use on all types of machinery including tractors Available in...

    Price £15.81 (ex. VAT)

    £18.97 (incl. VAT)

    £15.81 (ex. VAT)

    In Stock and Available for Delivery

    Teamac Marine Gloss

    Teamac Marine Gloss is a high quality, modified long oil alkyd marine coating. It has excellent gloss and opacity.High gloss Excellent opacity and adhesion Touch dry in as little as 4 hours (at 20°C) Full hardness in 5 - 7 days Suitable for all general marine areas, bridge fonts, deck work, masts, superstructures etc Available in...

    Price £16.55 (ex. VAT)

    £19.86 (incl. VAT)

    £16.55 (ex. VAT)

    In Stock and Available for Delivery

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)

    £12.04 (incl. VAT)

    £10.03 (ex. VAT)

    In Stock and Available for Delivery

    Surface Preparation Kits for Steel

    These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...

    Price £21.53 (ex. VAT)

    £25.84 (incl. VAT)

    £21.53 (ex. VAT)

    In Stock and Available for Delivery