Rust-Oleum 5500 Solvent Free Epoxy is a high build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers.
Rust-Oleum 5500 Solvent Free Epoxy
High build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers.
Applications
5500 is designed for application on concrete and masonry and can also be used on blasted steel, primarily intended for roller application and may also be applied by brush for small areas or touch-up only. A two coat 5500 System assures appropriate protection when in contact with chemicals (see chemical resistance guide), frequent chemical cleaning or high humidity and moisture conditions. Can be applied directly on properly cleaned, sound mineral substrates, sound, well prepared previous Epoxy coatings; porous substrates should be primed with Rust-Oleum 5401 Epoxy Impregnation Primer or Rust-Oleum 5421 Epoxy Floor Primer Rapid; very dense substrates, like ceramic tiles, should be primed with Rust-Oleum 3333 Super Adhesion Primer or Rust-Oleum 3366 Epoxy Powerfloat Floor Primer Rapid. 5500 can be applied directly on blasted steel or blasted galvanised steel; if required primed with Rust-Oleum 9170 Epoxy Metal Primer/Rust-Oleum 9180 Epoxy Metal Primer
Technical data
Drying Times At 20°C/RH 50%
Theoretical Consumption
6,7 m²/l
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Further application and technical instructions can be found on the product data sheet.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 colin wright on 2022-09-22 11:14:58 | Question: is this product suitable for painting the inside of a steel hopper which is used to hold ground Malt ie Malt Grist this is used in the brewing process so should be suitable for the food industry and not taint the end product |
Answer from Rawlins’ Technical Team: Unfortunately no this product would not be suitable. With application to hoppers we will need to know more information regarding preparation to the substrates and the process the paint will be exposed to. As these applications can be very abrasive to any paint system supplied, please can you provide more information to [email protected] | |
Rust-Oleum 5500 Solvent Free Epoxy is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum Powerfloat Epoxy Floor Primer Rapid 3366 is a rapid curing, 2-component epoxy primer designed to improve the adhesion of coatings to difficult substrates such as power-floated concrete.Overcoatable after just 3 hours: apply primer and topcoat in one day Easy all-in-1 packaging For new and aged power floated concrete, even with...
£162.47 (incl. VAT)
£135.39 (ex. VAT)
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment.Strong dilution...
£21.78 (incl. VAT)
£18.15 (ex. VAT)
Rust-Oleum 5421 Epoxy Floor Primer Rapid is a fast curing primer for use on new or untreated porous mineral surfaces, like concrete to bind weak and friable substrates - can be overcoated with any Rust-Oleum Mathys epoxy floor paint or polyurethane coating.For Professional use Overcoatable after just 4 hours: apply primer and topcoat in...
£203.44 (incl. VAT)
£169.53 (ex. VAT)
Rust-Oleum 9180 Epoxy Metal Primer is a fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal, also ideal for galvanised metal under severe conditions.For Professional use High build primer for optimal opacity with topcoat 9100 Touch dry after just 1 hour...
£181.09 (incl. VAT)
£150.91 (ex. VAT)
Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like:Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or...
£32.81 (incl. VAT)
£27.34 (ex. VAT)
Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces.For Professional use Primarily intended for roller and brush application Provides a good key for adhesion on porous, mineral substrates Impregnation of porous and brittle floors Can be applied on slightly damp...
£163.98 (incl. VAT)
£136.65 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish.Each kit contains:12" Roller,...
£101.58 (incl. VAT)
£84.65 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
