We no longer stock this product, but can recommend Coo-Var P101 Anti-Graffiti Coating as a great alternative.
Blackfriar Professional Anti Graffiti Lacquer is an exterior, high performance solvent based lacquer that provides an easy-to-clean, permanent (non-sacrificial) polyurethane coating against multiple graffiti attacks. Allows problem areas to be cleaned easily and effectively.
Preparation
Ensure the surface to be painted is sound, clean, dry and free from grease, laitence or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. New concrete must be left for at least 6 months before applying Blackfriar Professional AntiGraffiti Lacquer.
Application
Stir base thoroughly before adding all of the activator then mix well. DO NOT MIX PART UNITS. Allow to rest for 5 minutes before using. Pot life is 4 hours at 20°C. Apply with a brush or roller working the paint in any surface imperfections. On bare porous surfaces first apply Blackfriar Water Based Floor Sealer followed by 2 coats of Blackfriar Professional Anti-Graffiti Lacquer. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp. Do not apply in cold (below 5°C), damp or humid conditions.
Can be used on hardwoods and plywood but not suitable over softwoods, (even if previously painted). Do not apply directly to metal. If applying over existing hard/glossy paint, abrade the surface with a fine abrasive paper to flatten down. Bare porous surfaces must be completely dry before the application of Blackfriar Professional Anti-Graffiti Lacquer (if in doubt use a moisture meter). Not suitable for use over masonry paints.
Clean Up
Allow brushes and rollers to cure and dispose of. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.
Product Features
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 osagie on 2018-09-07 03:19:39 | Question: Hi , i just want to know if it works on woods like ply wood. I want to protect my companies doors from permanent markers and pen inks? How do i clean of these stains, hope i don't need another solvents? Thanks |
Answer from Rawlins’ Technical Team: Blackfriar Professional Anti Graffiti Lacquer can be used on hardwoods and plywood but not suitable over softwoods (even if previously painted). If applying over existing hard/glossy paint, abrade the surface with a fine abrasive paper to flatten down. Bare porous surfaces must be completely dry before the application of Blackfriar Professional Anti Graffiti Lacquer (if in doubt use a moisture meter). A graffiti removal chemical would need to be used to remove any graffiti attacks after application of this coating. Nu-Guard AG however is a unique anti-graffiti coating that protects all surfaces, including brick, concrete, render, stone, wood and plastic against all types of graffiti and poster glues. Once coated with Nu-Guard AG, nothing can stick to the surface. Nu-Guard AG is completely resistant to all paints, permanent markers and the majority of acids. Simply wash with water and graffiti disappears and posters just slide off, providing permanent protection against graffiti attack – without ghosting residue. | |
| Glyn on 2018-07-26 11:46:14 | Question: Dear peeps, We have just had an artist paint some metal panels in our local park using spray paint. It’s so beautiful we’d like to protect it, and we’re wondering if your anti graffiti lacquer is suitable to use on top of spray paint painted upon metal. Any help appreciated Many thanks Friends of eastville Park Bristol. |
Answer from Rawlins’ Technical Team: The solvents in Blackfriar Professional Anti Graffiti Lacquer Torlife WB satin PU865 or gloss PU862 clear lacquer could be used instead. This is a water based 2 pack and therefore less likely to react with the spray paints. You should still do a small test patch first, leave it for 15 minutes and check to see if it has had any effect on the edge detail of the spray paint. If it is OK after 15 mins you can carry on and paint the rest of the installation. Assuming the metal surface is smooth, 2 coats of the lacquer would be required. If it is a rough textured surface, 3 coats of the Torlife WB should be allowed for. As these alternatives are not listed currently on our website, please contact our sales team for pricing on 0113 2455450. | |
| K&A Restoration LTD on 2018-07-25 20:58:13 | Question: Hi I want to buy brick lacquer from you. I want to know did you sell it with activator together and do i need some base before that? |
Answer from Rawlins’ Technical Team: Each 5lt unit contains base and activator when purchased. On bare porous surfaces first apply Blackfriar Professional Water Based Floor Sealer followed by 2 coats of Blackfriar Professional Anti Graffiti Lacquer. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp. Do not apply in cold (below 5°C), damp or humid conditions. Can be used on hardwoods and plywood but not suitable over softwoods (even if previously painted). Do not apply directly to metal. If applying over existing hard/glossy paint, abrade the surface with a fine abrasive paper to flatten down. Bare porous surfaces must be completely dry before the application of Blackfriar Professional Anti Graffiti Lacquer (if in doubt use a moisture meter). Not suitable for use over masonry paints. | |
Blackfriar Professional Anti Graffiti Lacquer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Blackfriar Professional Water Based Floor Sealer is a clear, water-based, low-odour sealer. Ideal for binding, stabilising and sealing friable (loose) and porous surfaces prior to finishing with water-based coatings. Easy and safe to use. Product FeaturesSpecifically designed to seal bare and porous concrete substrates. Low-odour - ideal...
£31.99 (incl. VAT)
£26.66 (ex. VAT)
