Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints.
Mathys Pegafix
Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints.
Features & Benefits
Technical Data
Drying Times At 20°C/RH 50%
Theoretical Consumption
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Surface Preparation
Remove dust and / or clean carefully. Blistering plaster has to be sanded slightly to ensure a good adhesion or an adhesion test has to be done in advance.
Directions For Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use
Application Conditions
> 5°C, < 90% R.H.
Application Methods
Remarks
On low porosity substrates, Pegafix is preferred above Parafix and Porisol because of its better penetration characteristics. Possible dried spots (on windows, floors, etc.) can be removed with Thinner 22. When using on chalking substrates, always test for fixing suitability.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 David Hutt on 2023-04-25 12:53:48 | Question: Hi. Two questions - 1) do you recommend 2 coats of Pegafix on a rendered exterior wall where the previous paint has largely flaked off? 2) What is the mxximum time I can leave the wall after applying Pegafix before applying Mathys Murfill? I ask this because I am dodging the showers, and there may be some days after I've primed the wall before I can apply the Mathys Murfill. Thanks, David. |
Answer from Rawlins’ Technical Team: Before application we would recommend all loose and flaking material is removed back to a clean, dry, sound surface. If this is back to bare cement render this should be primed with either Rust-Oleum Mathys Primer 44 HS or Mathys Pegafix. Mathys Pegafix can also be used prior to application of Rust-Oleum Mathys Murfill Renovation Paint to chalking paints. Mathys Pegafix is dry to recoat in 2 to 4 hours and fully cured in 24hours at 20°C this should be overpainted before it is fully cured. | |
Mathys Pegafix is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types....
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
We no longer stock this product, but can recommend Mathys Parafix as a great alternative.
