• Zinsser AllCoat Exterior Satin (Solvent Based)

    Zinsser AllCoat Exterior Satin (Solvent Based) - Neutral Shades

    ZN7400002D1
    ZIN10301

    Pick cream, magnolia and beige from 75+ neutral shades including this year's 12 trending shades in Zinsser's ultimate all surface paint with up to 15 years performance on uPVC, doors and windows, exterior woodwork, masonry, cladding, Plastisol, steel, and more. Simply click 'Choose a colour' to see these shades.

    • Also available in 4,100+ RAL, NCS and BS colours 
    • The ultimate performance all surface paint
    • Mould and weather resistant - Recoatable in just 3 hours - 15 year lifetime
    • It is recommended to use Zinsser Allcoat Exterior Water Based unless application conditions (i.e. winter months) do not allow for water based paint to be used externally
    • This product is not suitable for application on floors

    Coverage Calculator

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish
    £22.95(ex. VAT)
    £27.54 (inc. VAT)
    Quantity
    Please choose your colour
    In Stock and Available for Delivery (See Delivery Options Below)

    Description

    Zinsser AllCoat Exterior Satin (Solvent Based) is an ultimate performance all surface paint. Designed for the long-term decoration (up to 15 years) of timber, metal, masonry, plastic, concrete, cladding and more. It forms a low maintenance water-shedding coating, re-coatable in 3 hours. Zinsser AllCoat Exterior Satin (Solvent Based) contains a biocide to protect the dried coating against fungal degradation. Available in 4,100+ RAL, NCS and BS colours.

    Designed for all paintable exterior surfaces, it is ideal for low temperature applications where water based may not be suitable on new or previously painted wood, uPVC, galvanising, steel, aluminium, cladding, stucco, brick, stone, cured concrete, Plastisol and more. Zinsser AllCoat Exterior Satin (Solvent Based)answers the question "can you paint upvc windows and doors?"

    This product is not suitable for application on floors.

    Recommended Uses

    • Redecoration and protection of all exterior surfaces
    • Building Cladding
    • Plastisol
    • uPVC
    • Wood
    • Steel work – e.g. girders, fencing, railings and masonry surfaces.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Available in 4,100+ RAL, NCS and BS colours
    • Multi surface application
    • Can be applied to 5°C
    • Resistant to showers after 1 hour
    • Excellent colour retention
    • Weather resistant
    • Recoat time - 3 hours
    • 15 year lifetime
    • This product is not suitable for application on floors
    • Recommended uses include:
      • Redecoration and protection of all exterior surfaces
      • Building Cladding
      • Plastisol
      • uPVC
      • Wood
      • Steel work – e.g. girders, fencing, railings and masonry surfaces.



    Surface Preparation


    Surfaces must be clean, sound and free of dirt, dust, grease, wax, loose paint or other surface contamination. Remove all existing mould and mildew before painting.

    To effectively remove mould and mildew, use Blackfriar Fungicidal Wash. Timber at risk from decay or insect attack should be treated with Blackfriar Exterior Wood Preservative Gold Star Clear.

    Very hard or glossy previously painted surfaces should be abraded and degreased. Before painting, fill all nail holes and gouges. Where necessary, spot prime knots and sap streaks with Zinsser B-I-N Primer-Sealer.

    Abrade & degrease unweathered plastisol & powder coatings.

    Allow new plaster/cement & stucco to cure 60-90 days before coating.

    Thoroughly degrease new galvanised steel.

    WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.

    For Composite Surfaces;

    Always ensure that the surface has been prepared sufficiently, Zinsser Universal Degreaser & Cleaner is ideal for this. As composite surfaces tend to have a wax like finish we would also advise lightly abrading the surface area. Two coats are required, the first coat acts as the primer and the second seals and protects the system



    Application


    Stir well before using.

    Apply when air and surface temperatures are between 5℃ and 32℃ and humidity is less than 80%.

    For airless spray use tip 0.13 - 0.017 at pressure 1800 – 2400 psi.

    Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.



    Dry Time


    At normal temperatures i.e. 20℃, ALLCOAT Exterior Satin (Solvent Based) dries to recoat in 3 hour. Full cure takes 7 days.



    Coverage


    Up to 10m2 per litre.

    Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.



    Cleaning


    Clean up application tools, spills and drips with a white spirit.

    If product has dried on application tool, clean with Zinsser Brush Cleaner and restorer. Follow manufacturer’s instructions when cleaning spray equipment.

    Dispose of unused or unwanted product in accordance with local laws regulating solvent-based coatings.



    Limitations


    ALLCOAT® Exterior Satin (Solvent Based) is not intended for application to exterior floors or decks or any surface subject to water immersion.

    To prevent product from skinning over, close container after each use. Keep lid tightly closed during storage.

    The paint film is designed to resist cracking, peeling and blistering for up to 15 years before first maintenance. The contents are warranted to be free of defects for two years from date of manufacture.

    All warranties and guarantees are limited to replacement or refund value of product actually used when supported by proof of purchase.

    Directions are as complete as possible but cannot encompass all conditions, applications and / or surfaces beyond our control.

    If you have a question, please contact Zinsser or Rawlins Technical Support on 0113 2455450 (option 2) or send a message to [email protected].



    Product Data


    Product Data
    Product Reference (gloss level)ZN740
    DryingTouch dry 1 hour, hard dry 16 hours at 20℃.
     Full cure achieved after 7 days.
    Recoat3 hour at 20℃
    NoteDrying and recoat times will be extended at a lower temperature.
    Spread Rate10m2 per litre per coat.
    Gloss Level20%
    Volume Solids50%
    Typical film thickness per coat50 microns dry from 100 microns wet.
    VOC(cat. A(i), limit 500g/lt) <500g/l
    Shelf life2 years in unopened containers
    Method of ApplicationBrush, Roller or Spray
    ThinnerNot normally required (use white spirit for conventional spray - not more than 10%).
    CleanerWhite spirits for cleaning equipment.



    Product Details
    2081-896995

    Data sheet

    Manufacturer
    Zinsser
    For Use By
    Consumer Use
    For Use On
    Aluminium
    Cladding
    Stucco
    Brickwork
    Stone
    uPVC
    Wood
    Steel
    Plastisol
    Galvanising
    Concrete
    Application Method
    Brush
    Roller
    Spray
    Sheen
    Satin
    Pack Size
    1L
    2.5L
    5L
    Application
    Brush, Roller, Spray
    Touch Dry (at 20°C)
    1 Hour
    Dry to Recoat (at 20°C)
    3 Hours
    Coverage
    10m² per litre
    Solids by Volume
    50%
    UN Number
    UN1263
    Hard Dry
    16 hours at 20℃
    Colour(s)
    Fully Tintable
    Base Type
    Solvent-Based
    Suitable For Use On
    Timber
    Suitable For Use On
    Trim Skirting
    Suitable For Use On
    Cladding
    Suitable For Use On
    Front Doors
    Suitable For Use On
    Concrete
    Suitable For Use On
    Brick
    Suitable For Use On
    Masonry
    Suitable For Use On
    Doors
    Suitable For Use On
    Metal
    Suitable For Use On
    Windows
    Suitable For Use On
    Weathered Bitumen
    Suitable For Use On
    Garage Doors
    Suitable For Use On
    Stucco
    Suitable For Use On
    UPVC
    Suitable For Use On
    Stone
    Finish
    Satin
    Application Method
    Spray
    Application Method
    Roller
    Application Method
    Brush
    Manufacturer
    Zinsser
    Usages
    High Weather Resistance
    Fastest Delivery
    Next Working Day
    Colour Family
    Cream
    Colour Family
    Magnolia
    Colour Family
    Beige
    Colour Family
    Neutral
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Neil cooper on 2023-06-07 18:58:12
    Question: 

    Hi, I purchased a tin of Zinsser AllCoat Exterior Satin (Solvent Based) paint. My question is, can it be thinned slightly? It seems quite thick and the brush drags quite easily. Many thanks Neil

    Answer from Rawlins’ Technical Team: 

    Thinning of this product is not normally required for brush or roller application, but it can be thinned upto a maximum of 10% with white spirit for conventional spray application.


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Zinsser AllCoat Exterior Satin (Solvent Based) - Neutral Shades is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    COVERAGE CALCULATOR
    Units
    Total area²
    Or enter length and width dimensions:
    Length
    Width

    *All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

    You might also like

    Zinsser B-I-N Aerosol

    Great for priming interior surfaces and spot priming exterior surfaces, formulated to seal, prime and block out stains on previously painted or new work and dries in minutes. For interior and spot exterior use Highly effective stain sealer Seals knots and sap streaks Permanently blocks odours Adheres to surfaces without sanding Dries...

    Price £14.86 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser B-I-N

    The ultimate performance shellac-based primer-sealer and stain killer in 1,500+ colours for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains.Permanently blocks odours Unparalleled adhesion to any surface without...

    Price £26.61 (ex. VAT)
    In Stock and Available for Delivery

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Brush Cleaner & Restorer

    Zinsser Brush Cleaner &amp; Restorer renews and restores used and hardened brushes in just 4 hours. It removes Zinsser B-I-N and most types of dried-on paint easily, is fast acting and does not require overnight soaking. More Information Delivery Info

    Price £7.00 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Mould Killer & Remover

    Zinsser Mould Killer and Remover is for use against fungi, moulds and algae on internal surfaces such as tiles, wood, plaster, and wallpaper. Zinsser Mould Killer and Remover is water based and ready for use.Kills and removes fungi, mould and algae growth Powerful fast acting formula Suitable for all interior surfaces Removes mould...

    Price £7.00 (ex. VAT)
    In Stock and Available for Delivery