Wethertex MS11 Multi-Surface Renovation Paint - Anthracite Grey

    Weth7050
    WET7050

    Anthracite Grey (RAL 7016) high performance protective coating with 10 year durability for multiple interior and exterior substrates including steel, PVC, uPVC, wood, brick and many more, self priming and resistant to flash rust. Provides a decorative satin finish.

    • Looking for a lighter or darker grey? Also available in 4200+ colour options
    • Long-term protection - highly durable, highly breathable and water repellent
    • Excellent adhesion - quick drying - Self Priming

    Coverage Calculator

    Colour
    Size
    Finish
    £101.43(ex. VAT)
    £121.72 (inc. VAT)
    Quantity
    Please choose your colour
    In Stock and Available for Delivery (See Delivery Options Below)

    Description

    Wethertex MS11 Multi-Surface Renovation Paint is a high performance protective coating providing a decorative satin finish offering long term protection with 10 year durability. It has superb adhesion to multiple substrates while being highly vapour permeable and water-shedding. This versatile, hard wearing paint for both interior and exterior application is also self priming and resistant to flash rust.

    Wethertex MS11 Multi-Surface Renovation Paint offers long-term protection, is highly breathable and water repellent. It is suitable for multiple surfaces Steel, Aluminium, Galvanized steel, Ceramic tile (not showers/wet rooms), PVC, Wood, Brick, Concrete Block, Stone, Plaster, Pre-cast concrete, Render, Fibre cement board, Plaster boards, Calcium silicate boards and any surface where great adhesion, fast drying, good coverage is required.

    Available in 4200+ colour options in RAL, BS, NCS and exclusive Wethertex shades.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Long-term protection - Advanced 10 years durability
    • Highly breathable
    • Water repellent
    • Highly durable
    • Excellent adhesion
    • Quick drying

    • Suitable for multiple surfaces including steel, PVC, uPVC, wood, brick and many more
      • Aluminium
      • Block
      • Brick
      • Calcium Silicate Boards
      • Ceramic Tile (Excluding Showers/Wet Rooms)
      • Clay Block
      • Concrete
      • Dash Rendered Finish
      • Ferrous Metals
      • Fibre Cement Boards
      • Galvanised Steel
      • Lightweight Block
      • Non-Ferrous Metals
      • Plastisol
      • Pre-Cast Concrete
      • PVC
      • Roughcast / Wet Dash
      • Smooth Render
      • Steel
      • Stone
      • Well Bonded Coatings
      • Well Bonded Paint
      • Wethertex GRC Fibre Glass Reinforced Base Coat
      • Wethertex X71 Polymer Levelling Base Coat
      • Wood & Timber
    • 4200+ colour options in RAL, BS, NCS and exclusive Wethertex shades
    • Approximately 12 to 15m²/Litre per coat dependant on the nature and porosity of the surface. Rough surfaces will significantly reduce the coverage rates



    Surface Preparation


    • Ensure all surfaces to be painted are clean, dry and free from grease, loose or flaking material and any other contaminants that may impair adhesion
    • Loose or friable masonry can be treated with Wethertex ST1 Quick Dry Stabilising Primer prior to application
    • Surfaces affected by bacterial, algal and fungal growth should be treated with Wethertex C10 Multi-Surface Fungicidal Wash prior to use
    • Any faults in the substrate, particularly those that can lead to moisture penetration, must be rectified or can affect the finish quality
    • If your substrate has been previously painted rub down with a fine waterproof abrasive paper and then rinse thoroughly
    • Bare substrates should also be abraded in a similar manner to allow improved adhesion
    • To improve inter-coat adhesion, repeat between all additional coats
    • Hard wall plasters should be scored with a coarse glass-paper
    • Avoid the inhalation of dust
    • Wear a suitable face mask if dry sanding



    Application


    • Apply by brush, roller, conventional H.V.L.P or airless spray
    • Stir well and check colour before use
    • Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried
    • Stir the product thoroughly to ensure it is fully homogeneous, do not contaminate
    • For the best results apply by brush, roller or spray
    • Application tool type and quality may influence the finished appearance
    • Apply liberally and avoid overspreading
    • Not to be applied below 8°C
    • Under normal conditions the coating will be touch dry after 1 hour
    • Overcoating time for subsequent coats is 3-4 hours
    • Porous surfaces should be sealed with a first coat of MS11 Multi-Surface Renovation Paint thinned with up to 20% clean water
    • On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly
    • Spraying can considerably reduce the coverage rate depending on the type of spray equipment used

    Please Note: Not suitable for areas under constant water contact such as shower cubicles or areas of high traffic such as worktops and handrails. Substrates which have had water-repellent preservative treatments applied should be avoided because adhesion could be compromised. Can be used on glass internally but not externally. Not recommended for horizontal decking areas and floors. Hot surfaces such as radiators should be coated when cold and allowed to dry before resuming heat. Paint will be fully hardened after 1 month



    Coverage


    • Approximately 12 to 15m²/Litre per coat dependant on the nature and porosity of the surface
    • Rough surfaces will significantly reduce the coverage rates



    Cleaning


    • All equipment must be washed with clean, cold water immediately after use
    • Waste material should not be emptied in the drainage systems
    • Some local authorities have special facilities for the disposal of leftover paint
    • Please do not add any product into drains or watercourses



    Storage


    • When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture
    • If you have any left over product, ensure that you close the tin by replacing the lid firmly and securely and store in a safe place
    • PROTECT FROM FROST
    • To avoid the risk of spillage, always store and transport in a secure upright position





    Product Details
    5415-903011

    Data sheet

    Manufacturer
    Wethertex
    For Use By
    Consumer Use
    For Use On
    Steel, Aluminium, Galvanized steel, Ceramic tile, PVC, Wood, Brick, Concrete Block, Stone, Plaster, Pre-cast concrete, Render, Fibre cement board, Plaster boards, Calcium silicate boards
    Sheen
    Satin
    Single, Two or Three Pack
    Single
    Application
    Brush, Roller, Spray
    Touch Dry (at 20°C)
    1 Hour
    Dry to Recoat (at 20°C)
    2-4 Hours
    Fully Cured (at 20°C)
    7-10 Days
    Coverage
    Approximately 12 to 15 m2 / Litre per coat
    Colour(s)
    Fully Tintable
    Base Type
    Water-Based
    Suitable For Use On
    Ceramic Tile
    Suitable For Use On
    Stone
    Suitable For Use On
    Fibre Cement Board
    Suitable For Use On
    Aluminium
    Suitable For Use On
    Plaster
    Suitable For Use On
    Galvanised Steel
    Suitable For Use On
    Brick
    Suitable For Use On
    PVC
    Suitable For Use On
    Wood
    Suitable For Use On
    Calcium Silicate Boards
    Suitable For Use On
    Render
    Suitable For Use On
    Steel
    Suitable For Use On
    Concrete
    Finish
    Satin
    Application Method
    Roller
    Application Method
    Brush
    Application Method
    Spray
    Manufacturer
    Wethertex
    Fastest Delivery
    Next Working Day
    Colour Family
    Anthracite Grey
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Wethertex MS11 Multi-Surface Renovation Paint - Anthracite Grey is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    COVERAGE CALCULATOR
    Units
    Total area²
    Or enter length and width dimensions:
    Length
    Width

    *All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

        

    You might also like

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)
    In Stock and Available for Delivery

    Wethertex C10 Multi-Surface Fungicidal Wash

    Ready to use water based masonry wash for removal of bacterial, algal and fungal growth on masonry surfaces prior to painting. Particularly effective against algae and mould growth and creates a clean surface, ready for painting.Long term protection - Fast acting - Bio Stop Suitable for hand or spray application - For use on masonry or...

    Price £21.26 (ex. VAT)
    In Stock and Available for Delivery

    Wethertex ST1 Quick Dry Stabilising Primer

    The ideal product for use when preparing unstable exterior surfaces for painting. Specially developed using fine particle sized polymers, this silicone based product is able to penetrate deep into the substrate, creating ultra high adhesion and high vapour permeability.Seals and stabilises prior to painting - For powdery masonry surfaces...

    Price £22.77 (ex. VAT)
    In Stock and Available for Delivery

    Wethertex Textured Rollers

    Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below. More Information Delivery Info Wethertex 2021 Brochure

    Price £13.28 (ex. VAT)
    In Stock and Available for Delivery