• Zinsser AllCoat Exterior Matt (Water Based)

    Zinsser AllCoat Exterior Matt (Water Based) - Chartwell Green

    ZN7390002D1
    ZIN7667

    Ultimate all surface paint with up to 15 years performance, available in Chartwell Green* and recommended for use on uPVC and composite windows & doors.

    • Also suitable for masonry, timber, metal,  plastic, concrete, cladding, weathered bitumen, stucco, brick, stone and more
    • Read our blog post on painting uPVC, or click here for FAQ's on painting uPVC
    • Long lasting finish, excellent colour retention
    • 3,900+ colours
    • Multi-surface - Anti-fungal degradation
    • Bonds to glossy paint - Recoat after 1 hour
    • Where application conditions (i.e. winter months) do not allow for water based paint to be used externally, it is recommended to use Zinsser Allcoat Exterior Solvent Based instead
    • This product is not suitable for application on floors
    • 10L temporarily unavailable
    • Please note: Matt finish products can be more susceptible to scuffs, watermarks, dirt, etc. in areas of frequent contact/use such as windows, doors, roller shutters etc. an alternative finish may be more suited (Satin & Gloss). Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for further advice if in doubt
    Colour
    Size
    Finish
    £18.59(ex. VAT)
    £22.31 (inc. VAT)
    Quantity
    Please choose your colour
    In Stock and Available for Delivery (See Delivery Options Below)

    Description

    *Many variations of the colour Chartwell Green exist within the marketplace;  simply having the same colour 'name' does not mean our Chartwell Green is the same as another Chartwell Green.

    You should therefore check the colour before carrying out any works: buy the smallest pack size available in the product and apply 2 full coats to the item in question. Allow to dry fully before making a decision.

    Rawlins Paints will not accept any liability for any costs or losses incurred in relation to colour discrepancy or similar claims.

    Zinsser AllCoat Exterior Matt (Water Based) is an ultimate performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a vapourpermeable, low maintenance water-shedding coating, re-coatable in 1 hour.

    ALLCOAT® Exterior Matt contains a biocide to protect the dried coating against fungal degradation.

    Designed for all exterior surfaces, ALLCOAT® Exterior Matt is ideal for new or previously painted uPVC, wood, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior Matt is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior Matt will ensure that any exterior looks bright and beautiful for years.

    This product is not suitable for application on floors.

    Please note: Matt finish products can be more susceptible to scuffs, watermarks, dirt, etc. so in areas of frequent contact/use such as windows, doors, roller shutters etc. an alternative finish may be more suited (such as Satin & Gloss). Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for further advice if in doubt.



    Click To Jump To Section:




    Features and Benefits


    • Cracking, blistering, and flaking resistant
    • Weather resistant
    • Easy to apply
    • Long lasting finish
    • Available in 4600+ RAL, NCS and British Standard colours
    • Satin & Gloss finishes also available
    • Excellent colour retention
    • Multi-surface application
    • Anti-fungal degradation
    • Bonds to glossy paint
    • This product is not suitable for application on floors



    Product Specification


    Technical Data
    Zinsser AllCoat Exterior Matt (Water Based)
    Finish:Matt
    Tinting:ALLCOAT® Exterior Matt is available in a full range of BS4800, RAL and NCS colours. Multiple containers of tinted paint should be intermixed (boxed) to ensure colour uniformity
    Volume Solids:40%
    Theoretical Coverage Rate:

    Up to 12m² per litre on non-porous surfaces

    On porous surfaces coverage will be reduced e.g. sawn timber - 4-8m² per litre

    Planed timber - 8-12m² per litre

    Normal application is 2 coats; however an additional coat should be applied to areas of high exposure such as sills and fascia boards

    Typical Film Thickness:40 microns
    VOC Values:35g/l
    Density:1.25 kg/litre
    Limitations:

    Not intended for application to exterior floors, decks or any surface subject to water immersion or prolonged contact with water

    It is recommended that unweathered / new powder coatings or stoved enamels are to be abraded and degreased thoroughly before applying All Coat Exterior

    Not suitable for application onto new plastisol or new powder coating. These surfaces must be fully weathered

    Shelf Life:2 years in unopened containers
    Storage:Store indoors at 5 – 25°C. Protect from frost



    Drying Times


    Curing Schedule At 20°C and 60% RH
    Touch DryDry to RecoatHard DryFull Cure
    1 Hour1 Hour4 Hours7 Days



    • Drying and recoat times will be extended at lower temperature and higher RH



    Surface Preparation


    • Surfaces should be clean, dry, sound, and free of any contamination that may interfere with adhesion
    • Remove all loose or peeling paint and chalky paint residue
    • Sand edges of any remaining paint film until smooth
    • Special precautions should be taken during surface preparation of pre-1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding
    • New concrete, masonry and other related surfaces must be cured at least 30 days before priming
    • Remove all existing mould and mildew before painting. To effectively remove mould and mildew, dirt, and chalky paint residue, use a proper fungicidal wash or exterior house cleaner following the manufacturer’s instructions
    • Timber at risk from decay or insect attack should be treated with an appropriate preservative
    • Bare galvanised metal: apply direct to clean, bright metal, no primer required, ensure surface is clean, dry and free from any surface contamination
    • Bare Ferrous Metal: product contains a flash rust inhibitor so will not rust the bare metal on application, can be applied direct if the metal is completely rust free, if this is unlikely apply a dedicated anti-corrosive metal primer such as Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion prior to application of AllCoat Exterior Water Based
    • Composite Surfaces: Always ensure that the surface has been prepared sufficiently, Zinsser Universal Degreaser & Cleaner is ideal for this. As composite surfaces tend to have a wax like finish we would also advise lightly abrading the surface area. Two coats are required, the first coat acts as the primer and the second seals and protects the system

    Note: AllCoat Exterior Water Based is not anti-corrosive, it acts as a barrier to water reaching the surface and rusting the metal.

    Two-Coat System

    • ALLCOAT® Exterior Matt is self-priming and will adhere to most sound surface. It bonds to existing glossy paints without sanding
    • The first coat of ALLCOAT® Exterior Matt primes and seals the surface, providing a base for the topcoat. The topcoat completes the sealing process while providing additional moisture resistance and protection
    • Before painting, fill all nail holes and gouges
    • Where necessary, spot prime knots and sap streaks with Zinsser B-I-N® Primer-Sealer
    • For new or unpainted cedar, redwood, or other resinous timbers prime with Zinsser Cover Stain



    Application Methods


    • Shake or stir well before using
    • Apply with synthetic bristle brush, roller, or sprayer
    • For airless spraying, use a .017” tip and high-medium (2000-2500 PSI) pressure
    • Avoid painting in direct sunlight and maintain a “wet edge” to avoid lapping
    • Ensure conditions during application and cure are favourable, do not apply if there is a likelihood of rain, frost, fog, or condensation affecting the freshly applied paint before it has fully cured



    Application Conditions


    • Ensure air and surface temperature are between 10°C & 32°C and humidity is less than 85% during application and cure of the product





    Health and Safety


    Clean Up

    • Clean application tools, spatters, and spills immediately with warm water and liquid detergent; rinse with water
    • Follow equipment manufacturer’s directions to clean spray equipment
    • Remove dried product with a household cleaner, rinse with water
    • Refer to the product data sheet and safety data sheet in the attachments section above for further details
    Product Details
    2008-902466

    Data sheet

    Manufacturer
    Zinsser
    For Use By
    Consumer Use
    For Use On
    Wood, uPVC, Galvanising, Metal, Cladding, Bitumen, Stucco, Brickwork, Stone, Concrete, Glossed Surfaces
    Sheen
    Matt
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Single
    Pack Size
    1L, 2.5L, 5L, 10L
    Application
    Brush, Roller, Spray
    Dry to Recoat (at 20°C)
    1 Hour
    Fully Cured (at 20°C)
    7 Days
    Coverage
    12m² per litre
    Min. Application Temperature
    10°C
    Density
    1.25 kg/litre
    Solids by Volume
    40%
    VOC
    35g/l
    Shelf Life (Once Opened)
    2 years in unopened containers
    Touch Dry
    30 mins
    Recommended Dry Film Thickness
    40 microns
    Hard Dry
    4 Hours
    Colour(s)
    Fully Tintable
    Colour(s)
    Standard Colours
    Base Type
    Water-Based
    Suitable For Use On
    Front Doors
    Suitable For Use On
    Stucco
    Suitable For Use On
    Masonry
    Suitable For Use On
    Stone
    Suitable For Use On
    Metal
    Suitable For Use On
    Doors
    Suitable For Use On
    Weathered Bitumen
    Suitable For Use On
    Windows
    Suitable For Use On
    Plastic
    Suitable For Use On
    Garage Doors
    Suitable For Use On
    UPVC
    Suitable For Use On
    Brick
    Suitable For Use On
    Timber
    Suitable For Use On
    Glossed Surfaces
    Suitable For Use On
    Cladding
    Suitable For Use On
    Trim Skirting
    Suitable For Use On
    Concrete
    Finish
    Matt
    Application Method
    Roller
    Application Method
    Brush
    Application Method
    Spray
    Manufacturer
    Zinsser
    Fastest Delivery
    Next Working Day
    Colour Family
    Chartwell Green
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Neil Morgan on 2023-08-30 11:29:56
    Question: 

    Hi. Does your Chartwell Green match the Renolit foil Chartwell green used by PVC window manufacturers?

    Answer from Rawlins’ Technical Team: 

    This product can be tinted to Chartwell Green, however there is more than one colour classified as Chartwell Green.

    Therefore we would suggest purchasing a Colour Sample Sachet in Chartwell Green to compare the colour match with the PVC manufacturers colour.

    questions John Draper on 2022-04-15 08:44:26
    Question: 

    Is this paint suitable for fibreglass door?

    Answer from Rawlins’ Technical Team: 

    Yes this paint will be suitable, the fibreglass garage door must be clean, dry, sound, prepared as detailed in the technical data sheet and primed first with Zinsser Bulls Eye 1-2-3.


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Zinsser AllCoat Exterior Matt (Water Based) - Chartwell Green is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


                                                                                                                                                                                                                                                                                                                                                                                                                                                        
    COVERAGE CALCULATOR
    Units
    Total area²
    Or enter length and width dimensions:
    Length
    Width

    *All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

        

    You might also like

    Zinsser Bulls Eye 1-2-3 Plus

    The next generation all-surface, all-purpose water-based primer, sealer and stainkiller in 1,500+ colours for any interior or exterior surface.Blocks the toughest of stains – even water and smoke Like Bulls Eye 1-2-3, it deals effortlessly with hard to paint interior and exterior substrates such as:Glossy surfaces, ceramic tiles,...

    Price £22.52 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser B-I-N Aerosol

    Great for priming interior surfaces and spot priming exterior surfaces, formulated to seal, prime and block out stains on previously painted or new work and dries in minutes. For interior and spot exterior use Highly effective stain sealer Seals knots and sap streaks Permanently blocks odours Adheres to surfaces without sanding Dries...

    Price £14.86 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Bulls Eye 1-2-3

    Zinsser Bulls Eye 1-2-3 is a water-based all surface, all-purpose primer, sealer & stainkiller.  It is also particularly effective as an adhesion promoting primer for hard-to-stick surfaces even without sanding.Interior and exterior  Available in 3,000+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours Seals...

    Price £15.93 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Cover Stain

    All-surface, all-purpose, oil-based primer, sealer, and stain killer for use on difficult-to-paint interior and exterior surfaces, with 2,900+ colour options.Sticks to all surfaces without sanding Seals water, smoke and nicotine stains Zinsser’s best exterior wood sealer Blocks cedar and redwood bleedMore Info View Similar...

    Price £14.77 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser B-I-N

    The ultimate performance shellac-based primer-sealer and stain killer in 1,500+ colours for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains.Permanently blocks odours Unparalleled adhesion to any surface without...

    Price £26.61 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Cover Stain Aerosol

    An interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in just two hours.Ideal for spot work and priming small objects Interior and exterior Seals Water, smoke and nicotine stains Sticks to all surfaces without sanding Best exterior wood sealer Blocks cedar and redwood bleed Fast drying Other Cover...

    Price £9.85 (ex. VAT)
    In Stock and Available for Delivery

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Universal Degreaser & Cleaner

    Zinsser Universal Degreaser & Cleaner is a water based detergent that is colour fast, fabric safe and removes tough stains quickly and effectively from many surfaces. A concentrated cleaner, degreaser and stain remover effective against grease and oil and is ideal for cleaning before painting.Concentrated cleaner, degreaser and stain...

    Price £7.00 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Mould Killer & Remover

    Zinsser Mould Killer and Remover is for use against fungi, moulds and algae on internal surfaces such as tiles, wood, plaster, and wallpaper. Zinsser Mould Killer and Remover is water based and ready for use.Kills and removes fungi, mould and algae growth Powerful fast acting formula Suitable for all interior surfaces Removes mould...

    Price £7.00 (ex. VAT)
    In Stock and Available for Delivery