• Zinsser AllCoat Exterior Satin (Solvent Based)

Zinsser AllCoat Exterior Satin (Solvent Based) - Chartwell Green

ZN7400002D1

Ultimate all surface paint with up to 15 years performance, available in Chartwell Green* and recommended for use on uPVC windows and doors.

  • Also suitable for masonry, timber, metal,  plastic, concrete, cladding, weathered bitumen, stucco, brick, stone and more
  • Read our blog post on painting uPVC, or click here for commonly asked questions about painting uPVC
  • Also available in 4,100+ RAL, NCS and BS colours 
  • Mould and weather resistant 
  • Recoatable in just 3 hours
  • This product is not suitable for application on floors

Colour
Size
Finish
£27.25
£32.70 Incl. VAT
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

Description

*Many variations of the colour Chartwell Green exist within the marketplace;  simply having the same colour 'name' does not mean our Chartwell Green is the same as another Chartwell Green.

You should therefore check the colour before carrying out any works: buy the smallest pack size available in the product and apply 2 full coats to the item in question. Allow to dry fully before making a decision.

Rawlins Paints will not accept any liability for any costs or losses incurred in relation to colour discrepancy or similar claims.

Zinsser AllCoat Exterior Satin (Solvent Based) is an ultimate performance all surface paint. Designed for the long-term decoration (up to 15 years) of timber, metal, masonry, plastic, concrete, cladding and more. It forms a low maintenance water-shedding coating, re-coatable in 3 hours. Zinsser AllCoat Exterior Satin (Solvent Based) contains a biocide to protect the dried coating against fungal degradation. Available in 4,100+ RAL, NCS and BS colours.

Designed for all paintable exterior surfaces, it is ideal for low temperature applications where water based may not be suitable on new or previously painted wood, uPVC, galvanising, steel, aluminium, cladding, stucco, brick, stone, cured concrete, Plastisol and more. Zinsser AllCoat Exterior Satin (Solvent Based) answers the question "can you paint upvc windows and doors?"

This product is not suitable for application on floors.

Recommended Uses

  • Redecoration and protection of all exterior surfaces
  • Building Cladding
  • Plastisol
  • uPVC
  • Wood
  • Steel work – e.g. girders, fencing, railings and masonry surfaces.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Available in 4,100+ RAL, NCS and BS colours
  • Multi surface application
  • Can be applied to 5°C
  • Resistant to showers after 1 hour
  • Excellent colour retention
  • Weather resistant
  • Recoat time - 3 hours
  • 15 year lifetime
  • This product is not suitable for application on floors
  • Recommended uses include:
    • Redecoration and protection of all exterior surfaces
    • Building Cladding
    • Plastisol
    • uPVC
    • Wood
    • Steel work – e.g. girders, fencing, railings and masonry surfaces.



Surface Preparation


Surfaces must be clean, sound and free of dirt, dust, grease, wax, loose paint or other surface contamination. Remove all existing mould and mildew before painting.

To effectively remove mould and mildew, use Blackfriar Fungicidal Wash. Timber at risk from decay or insect attack should be treated with Blackfriar Exterior Wood Preservative Gold Star Clear.

Very hard or glossy previously painted surfaces should be abraded and degreased. Before painting, fill all nail holes and gouges. Where necessary, spot prime knots and sap streaks with Zinsser B-I-N Primer-Sealer.

Abrade & degrease unweathered plastisol & powder coatings.

Allow new plaster/cement & stucco to cure 60-90 days before coating.

Thoroughly degrease new galvanised steel.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.



Application


Stir well before using.

Apply when air and surface temperatures are between 5℃ and 32℃ and humidity is less than 80%.

For airless spray use tip 0.13 - 0.017 at pressure 1800 – 2400 psi.

Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.



Dry Time


At normal temperatures i.e. 20℃, ALLCOAT Exterior Satin (Solvent Based) dries to recoat in 3 hour. Full cure takes 7 days.



Coverage


Up to 10m2 per litre.

Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.



Cleaning


Clean up application tools, spills and drips with a white spirit.

If product has dried on application tool, clean with Zinsser Brush Cleaner and restorer. Follow manufacturer’s instructions when cleaning spray equipment.

Dispose of unused or unwanted product in accordance with local laws regulating solvent-based coatings.



Limitations


ALLCOAT® Exterior Satin (Solvent Based) is not intended for application to exterior floors or decks or any surface subject to water immersion.

To prevent product from skinning over, close container after each use. Keep lid tightly closed during storage.

The paint film is designed to resist cracking, peeling and blistering for up to 15 years before first maintenance. The contents are warranted to be free of defects for two years from date of manufacture.

All warranties and guarantees are limited to replacement or refund value of product actually used when supported by proof of purchase.

Directions are as complete as possible but cannot encompass all conditions, applications and / or surfaces beyond our control.

If you have a question, please contact Zinsser or Rawlins Technical Support on 0113 2455450 (option 2) or send a message to [email protected].



Product Data


Product Data
Product Reference (gloss level) ZN740
Drying Touch dry 1 hour, hard dry 16 hours at 20℃.
  Full cure achieved after 7 days.
Recoat 3 hour at 20℃
Note Drying and recoat times will be extended at a lower temperature.
Spread Rate 10m2 per litre per coat.
Gloss Level 20%
Volume Solids 50%
Typical film thickness per coat 50 microns dry from 100 microns wet.
VOC (cat. A(i), limit 500g/lt) <500g/l
Shelf life 2 years in unopened containers
Method of Application Brush, Roller or Spray
Thinner Not normally required (use white spirit for conventional spray - not more than 10%).
Cleaner White spirits for cleaning equipment.



Product Details
ZN7400002D1

Data sheet

Manufacturer
Zinsser
For Use By
General Use
For Use On
Aluminium, Cladding, Stucco, Brickwork, Stone, uPVC, Wood, Steel, Plastisol, Galvanising, Concrete
Single, Two or Three Pack
Single
Pack Size
1L, 2.5L, 5L
Application
Brush, Roller, Spray
Touch Dry (at 20°C)
1 Hour
Dry to Recoat (at 20°C)
3 Hours
Coverage
10m² per litre
Solids by Volume
50%
UN Number
UN1263
Hard Dry
16 hours at 20℃
Colour(s)
Fully Tintable
Base Type
Solvent-Based
Exterior / Interior Use
Exterior Use
Suitable For Use On
Concrete
Suitable For Use On
Front Doors,Concrete,Brick,Masonry,Doors,Metal,Windows,Weathered Bitumen,Garage Doors,Stucco,uPVC,Stone,Timber,Wood,Trim Skirting,Cladding
Suitable For Use On
Brick
Suitable For Use On
Masonry
Suitable For Use On
Doors
Suitable For Use On
Metal
Suitable For Use On
Windows
Suitable For Use On
Weathered Bitumen
Suitable For Use On
Garage Doors
Suitable For Use On
Stucco
Suitable For Use On
uPVC
Suitable For Use On
Stone
Suitable For Use On
Timber
Suitable For Use On
Trim Skirting
Suitable For Use On
Cladding
Suitable For Use On
Front Doors
Finish
Satin
Application Method
Brush
Application Method
Spray
Application Method
Roller
Manufacturer
Zinsser
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Elizabeth on 2021-09-15 23:18:07
Question: 

Is this suitable for a composite door?

Answer: 

Assuming the composite door is clean,dry, sound and prepared as detailed in the technical data sheet yes this can be used.


Question about the product

* Required fields
(read)
Send
You might also like

Zinsser B-I-N Aerosol

Zinsser B-I-N Aerosol is great for priming interior surfaces and spot priming exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work and dries in minutes.  • For interior and spot exterior use• Highly effective stain sealer• Seals knots and sap streaks• Permanently blocks odours• Adheres to...

Price £14.86
In Stock and Available for Delivery

Zinsser B-I-N

Zinsser B-I-N is the ultimate performance shellac-based primer-sealer and stain killer for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains. Ultimate performance primer-sealer Permanently blocks odours...

Price £28.34
In Stock and Available for Delivery

Blackfriar Wood Protector Gold Star

This product is temporarily unavailable; in the meantime, our technical team recommend Sikagard Universal 5 Star Wood Treatment as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt...

Price £12.93
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £10.03
In Stock and Available for Delivery

Zinsser Brush Cleaner & Restorer

Zinsser Brush Cleaner &amp; Restorer renews and restores used and hardened brushes in just 4 hours. It removes Zinsser B-I-N and most types of dried-on paint easily, is fast acting and does not require overnight soaking. More Information

Price £6.99
In Stock and Available for Delivery

Zinsser Mould Killer & Remover

Zinsser Mould Killer and Remover is for use against fungi, moulds and algae on internal surfaces such as tiles, wood, plaster, and wallpaper. Zinsser Mould Killer and Remover is water based and ready for use. Kills and removes fungi, mould and algae growth Powerful fast acting formula Suitable for all interior surfaces Removes mould...

Price £6.99
In Stock and Available for Delivery