Zinsser AllCoat Exterior Satin (Water Based) - Shades Of Green


    Pick from 1100+ greens including 12 trending shades of green in Zinsser's ultimate all surface paint with up to 15 years performance on uPVC, doors and windows, composite surfaces, exterior woodwork, masonry, cladding, Plastisol, steel, and more. Click 'Choose a colour' to see these shades.

    • Recommended for use on uPVC - read our blog post on painting uPVC doors and windows, or click here for commonly asked questions about painting uPVC
    • Also suitable for timber, metal, masonry, plastic, concrete, cladding, weathered bitumen, stucco, brick, stone & more
    • Cracking, blistering & flaking resistant
    • Long lasting finish - Fungal protection - Multi-surface application
    • Also available in matt and gloss finishes - Contact us for colour match options
    • Where application conditions (i.e. winter months) do not allow for water based paint to be used externally, it is recommended to use Zinsser Allcoat Exterior Solvent Based instead
    • Not suitable for application on floors
    • Note: Colours are named by RAL/British Standard and may not accurately represent the shade, or match other colours of the same name in other brands - we recommend you consult a colour chart or paint a test patch before application

    Coverage Calculator

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
      Your customization:
    Colour Group
    £16.45(ex. VAT)
    £19.74 (inc. VAT)
    Please choose your colour
    In Stock and Available for Delivery (See Delivery Options Below)


    Zinsser AllCoat Exterior Satin (Water Based) is an ultimate performance all surface paint. Designed for the long term decoration (up to 15 years) of timber, metal, masonry, plastic, concrete, cladding and more, it forms a vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour.

    This product contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, Zinsser AllCoat Exterior Satin (Water Based) is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more.

    It is also self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of Zinsser AllCoat Exterior Satin (Water Based) will ensure that any exterior looks bright and beautiful for years.

    This product is not suitable for application on floors.

    Click To Jump To Section:

    Features & Benefits

    • Recommended for use on uPVC - read our blog post on painting uPVC doors and windows, or click here for commonly asked questions about painting uPVC
    • Also suitable for timber, metal, masonry, plastic, concrete, cladding, weathered bitumen, stucco, brick, stone and more
    • Cracking, blistering and flaking resistant
    • Long lasting finish
    • Fungal protection
    • Multi-surface application
    • Also available in matt and gloss finishes
    • Contact us for colour match options
    • This product is not suitable for application on floors

    Product Specification

    Technical Data
    Suitable For Use With:uPVC, timber, metal, masonry, plastic, concrete and cladding
    Volume Solids:40%
    Typical Film Thickness Per Coat:40 microns
    Density:1.25 kg/litre
    Limitations:Not intended for application to exterior floors, decks or any surface subject to water immersion or prolonged contact with water.
    Shelf life:2 years in unopened containers
    Storage:Store indoors at 5 - 25°C. Protect from frost.


    • ALLCOAT® Exterior Satin is available in a full range of BS4800, RAL and NCS colours. Multiple containers of tinted paint should be intermixed (boxed) to ensure colour uniformity.

    Drying Times

    Drying Time @ 20°C and 60% RH
    Dry To TouchDry To RecoatHard DryFully Cured
    1 hour1 hour4 hours7 days


    • Up to 12m² per litre on non-porous surfaces. On porous surfaces coverage will be reduced e.g. sawn timber - 4-8m² per litre. Planed timber - 8-12m² per litre. Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.

    Surface Preparation

    • Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion.
    • Remove all loose or peeling paint and chalky paint residue.
    • Sand edges of any remaining paint film until smooth.
    • New concrete, masonry and other related surfaces must be cured at least 30 days before priming.
    • Remove all existing mould and mildew before painting.
    • To effectively remove mould and mildew, dirt and chalky paint residue, use Blackfriar Fungicidal Wash or Zinsser Mould Killer & Remover or an exterior house cleaner following the manufacturer’s instructions.
    • Timber at risk from decay or insect attack should be treated with an appropriate preservative.
    • Bare galvanised metal: apply direct to clean, bright metal, no primer required, ensure surface is clean, dry and free from any surface contamination
    • Bare Ferrous Metal: product contains a flash rust inhibitor so will not rust the bare metal on application, can be applied direct if the metal is completely rust free, if this is unlikely apply a dedicated anti-corrosive metal primer such as Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion prior to application of AllCoat Exterior Water Based
    • Composite Surfaces: Always ensure that the surface has been prepared sufficiently, Zinsser Universal Degreaser & Cleaner is ideal for this. As composite surfaces tend to have a wax like finish we would also advise lightly abrading the surface area. Two coats are required, the first coat acts as the primer and the second seals and protects the system

    Note: AllCoat Exterior Water Based is not anti-corrosive, it acts as a barrier to water reaching the surface and rusting the metal.

    Special precautions should be taken during surface preparation of pre-1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

    Application Methods

    Product Information
    Application:Brush, roller, or spray
    Airless Spray:Use .017” tip and high-medium (2000-2500 PSI) pressure.
    Application Temperature:Between 10°C and 32°C
    Relative Humidity:Less than 85%

    • Shake or stir well before using.
    • Ensure air and surface temperature are between 10°C and 32°C and humidity is less than 85% during application and cure of the product.
    • Avoid painting in direct sunlight and maintain a “wet edge” to avoid lapping.
    • Ensure conditions during application and cure are favourable, do not apply if there is a likelihood of rain, frost, fog or condensation affecting the freshly applied paint before it has fully cured.

    Clean Up

    • Clean application tools, spatters and spills immediately with warm water and liquid detergent; rinse with water.
    • Dried paint on brushes can be removed with Zinsser BIN Brush Cleaner. Follow equipment manufacturer’s directions to clean spray equipment.
    • Remove dried product with a household cleaner; such as Zinsser Universal Cleaner & Degreaser, rinse with water.

    Commonly Asked Questions About Painting uPVC

    Can this product be colour matched for existing uPVC door and window colours?

    • Yes, please post a sample of the colour you want matching to; Rawlins Paints, FAO Technical Team, Northspeed House, Moorview, Holbeck, Leeds, LS11 9NF.
    • Alternatively if you know the colour code for the colour but it is not listed on our website for this product give us a call as we may already have a match.

    Can dark uPVC surfaces be painted over with white or lighter colours?

    • This product is self-priming, so 2-3 coats of a lighter colour should cover the dark original uPVC surfaces

    Can new uPVC be painted over?

    • We would advise abrading the surfaces with a fine grade of sandpaper followed by a solvent wipe using methylated spirits. Then apply 2 coats of the AllCoat Exterior water based when weather permits.

    Can this product be used on uPVC front doors?

    • Yes, and with a huge range of colour options, it is perfect for the job

    Can this product be used to recoat and recolour faded or aged white uPVC window frames?

    • Yes, exterior surfaces which have been weathered can be washed down using warm water and dilute detergent followed by rinsing off with clean water and then 2 coats AllCoat Exterior Satin (Water Based)

    Can this product be thinned down for application?

    • No, Zinsser products should not be thinned down

    Health & Safety

    Product Details

    Data sheet

    For Use By
    Consumer Use
    For Use On
    Single, Two or Three Pack
    Pack Size
    1L, 2.5L, 5L
    Brush, Roller, Spray
    Touch Dry (at 20°C)
    30 mins
    12m² per litre
    Min. Application Temperature
    Fully Tintable
    Base Type
    Suitable For Use On
    Suitable For Use On
    Suitable For Use On
    Suitable For Use On
    Suitable For Use On
    Weathered Bitumen
    Suitable For Use On
    Garage Doors
    Suitable For Use On
    Suitable For Use On
    Suitable For Use On
    Suitable For Use On
    Suitable For Use On
    Trim Skirting
    Suitable For Use On
    Suitable For Use On
    Front Doors
    Suitable For Use On
    Suitable For Use On
    Application Method
    Application Method
    Application Method
    Fastest Delivery
    Next Working Day
    Colour Family
    Chartwell Green
    Colour Family

    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

    questions Andy Crook on 2022-06-01 21:59:12

    What is the difference between Zinsser Allcoat water based and solvent based. thanks

    Answer from Rawlins’ Technical Team: 

    For most applications you would choose water based if temperatures are over 10°C and solvent based for below 10°C.

    A matt finish is only available in water based.

    Question about the product

    * Required fields


    Zinsser AllCoat Exterior Satin (Water Based) - Shades Of Green is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT

    Total area²
    Or enter length and width dimensions:

    *All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage


    You might also like

    Zinsser B-I-N Aerosol

    Great for priming interior surfaces and spot priming exterior surfaces, formulated to seal, prime and block out stains on previously painted or new work and dries in minutes. For interior and spot exterior use Highly effective stain sealer Seals knots and sap streaks Permanently blocks odours Adheres to surfaces without sanding Dries...

    Price £14.86 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser B-I-N

    The ultimate performance shellac-based primer-sealer and stain killer in 1,500+ colours for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains.Permanently blocks odours Unparalleled adhesion to any surface without...

    Price £26.61 (ex. VAT)
    In Stock and Available for Delivery

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £8.02 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Brush Cleaner & Restorer

    Zinsser Brush Cleaner & Restorer renews and restores used and hardened brushes in just 4 hours. It removes Zinsser B-I-N and most types of dried-on paint easily, is fast acting and does not require overnight soaking. More Information Delivery Info

    Price £7.00 (ex. VAT)
    In Stock and Available for Delivery

    Zinsser Mould Killer & Remover

    Zinsser Mould Killer and Remover is for use against fungi, moulds and algae on internal surfaces such as tiles, wood, plaster, and wallpaper. Zinsser Mould Killer and Remover is water based and ready for use.Kills and removes fungi, mould and algae growth Powerful fast acting formula Suitable for all interior surfaces Removes mould...

    Price £7.00 (ex. VAT)
    In Stock and Available for Delivery