Pick from 300+ greys and 12attractiveshades of grey chosen specifically for direct application on concrete floors, wooden floors and masonry.
Rust-Oleum 7200 Floorcoat PU is a single pack, polyurethane enhanced floor coating for use inside and out that offers good protection and is very easy to apply. Also available in 4,100+ colours, in Gloss and Satin finishes, including RAL, BS or NCS shades (except metallic and fluorescent shades).
Extra durable because of polyurethane addition
Excellent flow and aspect
High coverage: 9m² per litre
Note: Colours are named by RAL/British Standard and may not accurately represent the shade, or match other colours of the same name in other brands - we recommend you consult a colour chart or paint a test patch before application
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Rust-Oleum 7200 Floorcoat PU is a single pack easy to apply solvent based urethane modified alkyd floor coating specially designed for applying on dry concrete, wood and masonry for interior and exterior use. Rust-Oleum 7200 Floorcoat PU is also ideal as a line marking product, the coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant during short contact periods against lubricating oils, fuel, petrol etc.
Rust-Oleum 7200 Floorcoat PU can be applied directly on concrete floors, wooden floors and masonry which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a damp repellent additive, which will prevent a good adhesion. Rust-Oleum 7200 Floorcoat PU can also be applied on old good adhering coatings and can also be applied onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.
Product Advantages:
Extra durable because of polyurethane addition
Excellent flow and aspect
Any colour available in gloss & satin
For indoor and outdoor usage
For many different surfaces
High coverage: 9m² per litre
Can Be Used For:
Concrete floors
Line marking
Wooden floors
Pre-painted floors
Preparation:
To ensure homogeneity, coating materials should be thoroughly stirred prior to use. Remove oil, grease and other contamination with Rust-Oleum Mathys ND14 Cleaner Degreaser or high pressure (steam) cleaning in combination with appropriate detergents. Sand old intact coatings to roughen the surface in order to establish a good adhesion. Check the compatibility with old intact coatings. During application the surface should be dry and clean. On porous concrete a first coat should be applied with Rust-Oleum 7200 Floorcoat PU diluted with ±5% Rust-Oleum Thinner 633. On new concrete (>28 days) use Rust-Oleum 7201 Universal Floor Primer as a first coat or use Rust-Oleum Mathys 108 Surfa Etch Solution to neutralise any remaining alkalinity from the cement. Remove curing compounds by means of dust free blasting.
Roller: Sparingly, if required, with 5% Rust-Oleum Thinner 633. In case of roller application it can be necessary to apply 2 coats in order to obtain the recommended film thickness.
Air-Atomised Spray: Thin with max. 10% Rust-Oleum Thinner 641. Gravity cup and pressure cup. Tip size: 1.0 -1.5 mm. Atomising pressure: 2 – 4 bar.
Apply in a dry and well-ventilated area. Do not apply Rust-Oleum 7200 Floorcoat PU on alkaline substrates, or in areas which will be constantly under water.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum 7200 Floorcoat PU - Shades of Grey is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray.Can also be used for the cleaning of some surfaces prior to application of the coating Suitable for cleaning of the application tools such as Brushes,...
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system.Improves the adhesion of coating systems Neutralizes alkaline salts Also ideal to remove "white...
Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates.Non-flammable, virtually odour-free cleaning/degreasing solution. Can be used as an additive for high pressure and steam cleaning Applied by synthetic sponge,...
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray.Can also be used for the cleaning of some surfaces prior to application of the coating Suitable for the cleaning of the application tools such as Brushes,...
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish.Each kit contains:12" Roller,...
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum 7201 Universal Floor Primer is ready for use solvent based adhesion primer based on a special epoxyester binder. Improves the adhesion...
Rust-Oleum Non-Skid Additive NS 100 an anti-slip HDPE granulate that turns a standard floor coating into a durable anti-slip coating. It is intended to be added to 1K floor paint to produce a subtle non-skid surface, that is easier to clean than coarse anti-slip floors.Smaller size granules for more subtle anti-slip finish Designed for...