Single pack water-based elastomeric coating based on a silane modified acrylic binder with superior adhesion and corrosion protection. The product contains anti-corrosion pigments and is lead, chromate and zinc free.
Dry Times By 20ºC/RV 50% |
---|
Touch dry: | 1hr and 20 minutes |
Dry to handle: | 2 hours and 45 minutes |
Dry to recoat: | 24 hours |
Fully cured: | 2 weeks |
Recommended Wet Film Thickness
Recommended Dry Film Thickness
Theoretical Consumption
- Brush/Roller - 240 - 360 g/m²/coat
- Airless - 360 - 600 g/m²/coat
Total consumption for optimal rust preventive protection 1000 g/m² (in minimum 2 coats) = 350 µm dry film thickness.
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Surface Preparation
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents.
The substrate has to be dust free and made rust free by means of sandblasting (Sa2), manual cleaning (St2) or high pressure water jetting (min. 600 Bars). After jetting, the substrate has to be dust free.
On new galvanised surfaces, new zinc, aluminium, stainless steel, apply first a coat of Pegalink or PVDF Primer.
On ferrous substrates, apply Noxyde Plus in red or grey as the first coat. In all instances apply contrasting Noxyde Plus colours for subsequent layers.
Application
Direction for Use
To ensure homogeneity, coating materials should be thoroughly stirred mechanically prior to use.
Application Conditions
Temperature of air, substrate and coating material between 8 and 35°C. Air humidity max. 80% R.H.
The substrate temperature must be at least 5°C above dew point.
Application and Thinning
Brush:Undiluted as a rust preventive paint. Diluted with up to 25% volume water as an adhesion primer (consumption about 120 g/m² / max. 100 µm wet film thickness / 20 µm dry film thickness).
Roller:
Undiluted as a rust preventive paint. Diluted with up to 25% volume water as an adhesion primer (consumption about 120 g/m² - max. 100 µm wet film thickness - 20 dry film thickness).
Airless Spray
Undiluted. Nozzle: 15 - 19 / Pressure: min. 170 bars. Nozzle and pressure can vary depending on the type of substrate, equipment and the experience of the applicator. Put a thin layer of water on top of the paint to prevent skinning.
Cleaning of Equipment/Spills:
Water.
Remarks
When used for interior works, provide for adequate ventilation. during work stoppage, fully immerse brush or nozzle in water. Product is recoatable after 24 hours with itself.
Compatible topcoats:
Do not apply outside if rain is expected within 24 hours.
Max. 500 g/m²/coat - 400 µm WFT - 184 µm DFT
Safety Data
Safety Data |
---|
VOC level: | 45g/l |
VOC readymix: | 45g/l |
VOC category: | A/i |
VOC limit: | 140g/l |
Remarks regarding safety: | Consult Safety Data Sheet and Safety Information printed on the can. |
Shelf Life
Minimum of 4 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C.