Kolorbond K2 Set - Shades of Yellow

    Tech5782
    KOL9528

    Choose from 190+ yellow shades in this two pack PU coating set of the base plus hardener. 10 year adhesion guarantee - 5 year colour fastness guarantee, durable, lightfast coating. See more colours here.

    • Note: Colours are named by RAL/British Standard and may not accurately represent the shade, or match other colours of the same name in other brands - we recommend you consult a colour chart or paint a test patch before application
    • Individual components are available seperately: base, hardener, thinner, accelerator, retarder and cleaner
    • Performance and guarantees not valid without purchase and use of the hardener and relevant cleaning products
    • Hardener supplied in correct quantities (6L, 30L sets); for 1.25L set, just 200ml of hardener required, not full tin
    • For the brush grade product please see Kolorbond DecoPro
    • Glass Additive available - must be used if applying to glass

    Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

    Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

    Should you require training, visit - https://www.safeusediisocyanates.eu/

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish
    Option
    Add-Ons
    £60.45(ex. VAT)
    £72.54 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

    Should you require training, visit - https://www.safeusediisocyanates.eu/

    Kolorbond K2, a two pack PU coating which can be applied directly onto a variety of substrates including metals, GRP, composite doors and hard plastics including PVCu (uPVC). It can be applied with all types of spraying equipment. For the brush grade version please see Kolorbond DecoPro. Guaranteed adhesion for 10 years, with 5 years guarantee on colour fastness - Performance and guarantees not valid without purchase and use of the hardener and the relevant cleaning products.

    Please note: hardener in 6L and 30L packs supplied in the correct measured quantities to be mixed together in full to achieve the correct mixing ratio when combined (5 parts base to 1 part hardener). 1.25L pack size (1L Base + 0.25L Hardener) requires just 200ml of hardener into 1L of base, not the full tin.

    For any help regarding mixing, please contact our technical department on 0113 2455450 (option 2) or send a message to [email protected]

     

    Highly resistant to abrasion

    Kolorbond K2 is based on two pack polyurethane/acrylic technology, making the finished coating highly resistant to abrasion, and other accidental damage. It is very durable, once dry, and easy to apply using any standard spray equipment, either on-site or in a manufacturing environment. For the brush grade version please see Kolorbond DecoPro.

     

    Unique paint

    A unique paint that acts as a durable, lightfast coating across a vast range of previously "un-paintable" substrates. Tested and demonstrated effectiveness in coating PVCu (uPVC), GRP, mill, polyester powder coated & anodised aluminium, stainless steel, hard plastics, cast iron and steel, light alloys, galvanised and phosphated steel, composite doors and even glass.

     

    No primer required

    In most applications, Kolorbond K2 does not require a primer and is able to be applied in a high film thickness. Most applications are possible in one stage saving substantial time compared to other coatings.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Sets of base + hardener; individual components are available seperately: base, hardener, thinner, accelerator, retarder and cleaner
    • Performance and guarantees not valid without purchase and use of the hardener and the relevant cleaning products
    • Can be applied directly onto a variety of substrates including PVCu (uPVC), GRP, mill, polyester powder coated & anodised aluminium, stainless steel, hard plastics, cast iron and steel, light alloys, galvanised and phosphated steel, composite doors and even glass
    • Highly resistant to abrasion
    • Very durable, once dry
    • Easy to apply using any standard spray equipment
    • For the brush grade version of this product please see Kolorbond DecoPro
    • Durable, lightfast coating
    • Available in an almost infinite spectrum of colours
    • In most applications does not require a primer
    • Note: HSE require the use of air-fed spray masks for 2 pack paints
    • Available in 2400+ colours from RAL, NCS and British Standard
    • Can be colour matched to nearly any colour, finish and texture (and Steritouch range)
    • Choose smooth or textured options, in matt through to gloss finishes
    • 10 year adhesion guarantee - 5 year colour fastness guarantee



    Application Instructions


    This paint is for professional use only

    Performance and guarantees not valid without purchase and use of the hardener and relevant cleaning products

     

    1. Mask the substrate, covering all surfaces which do not require painting.
    2. Clean the substrate using Vinylkleen. This will remove all water soluble contaminants together with most oils.
    3. Thoroughly clean the surface again using Windowprep on a clean white cloth which should be regularly turned.
    4. Lightly abrade the surfaces to be painted with red Scotchbrite and remove debris. Uncoated metals must be abraded with a grit paper to remove any oxidation.
    5. Check that the paint colour and gloss level are correct. Thoroughly stir the Kolorbond K2 paint making sure that any colourants on the base of the can are mixed in.
      • Stir in the required amount of K2 Hardener, 5:1 by volume (6L and 30L packs only; for 1.25L pack size, hardener is supplied in 250ml size but only 200ml is required). The paint will now have a maximum pot life of 2 hours. Only mix the amount of paint you can use in that time.
      • If spraying glass, add 10% G-pro Glass Additive (available under "Add ons" further above) and mix in thoroughly
    6. Use a tack rag, if necessary, to remove any dust or swarf remaining on the surface of the substrate.
    7. The sprayer must use a mask suitable for 2 pack paint. Skin must be protected by the use of gloves etc.
    8. Spray the substrate with a dust coat followed by a medium coat.
    9. Allow the first coat to flash off then apply a second coat. A third coat may be added if a dry finish of up to 90µ thickness is required. Any inclusions should be removed gently, with red Scotchbrite, between coats.
    10. The paint will cure and harden overnight. The paint can still emit solvents after curing so leave as long as possible before applying protective tape.
    11. Drying can be accelerated by adding K2 Accelerator (2%).

    Please note: K2 Retarder (C425 Retarder) may be added to Kolorbond K2 when spraying large areas subject to direct sunlight in extremely hot conditions to slow drying times - please see below:

    • K2 Retarder referenced on the Product Data Sheets for Kolorbond K2 is also known as C425 Retarder
    • Generally, Kolorbond K2 does not require retarding in the UK climate
    • The only exception to this is if the project requires the spraying of large areas in direct sun in the summer
    • If in doubt please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details



    Product Details
    5782-900288

    Data sheet

    Manufacturer
    Technispray
    For Use By
    Industrial Use
    Water / Solvent Based
    Solvent
    For Use On
    (uPVC), GRP, Composite Doors, Mill, Aluminium, Stainless Steel, Hard Plastics, Cast Iron, Steel, Light Alloys, Gavanising, Phosphated Steel, Glass
    Sheen
    Matt, Satin, Semi-Gloss, Gloss
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    6L Pack, 30L Pack, 1L, 5L, 20L
    Mixing Ratio
    By volume: 5 parts base, 1 part hardener
    Mixing Ratio
    By weight: 7 parts base, 1 part hardener
    Application
    Spray
    Pot Life (at 20°C)
    2 - 3 hours
    Coverage
    14m2 per litre (30 micron dry film thickness)
    Recommended Thinner/Cleaner
    Gun cleaner
    VOC
    520-550 g/l (dependant on colour)
    Drying time
    At 20C: dust free: 1 hour
    Specific Gravity
    At 20C: Kolorbond K2 1.3 g/cm, K2 Hardener 1.0 g/cm
    Solids by Weight
    60-65% (dependant on colour)
    Hard Dry
    At 20C: 16 hours, at 50C: 1 hour
    Flashpoint
    23C (method ISO3679)
    Flash Time (Between Coats)
    15 minutes
    Colour(s)
    Fully Tintable
    Base Type
    Solvent-Based
    Finish
    Satin
    Finish
    Semi-Gloss
    Finish
    Matt
    Finish
    Gloss
    Manufacturer
    Kolorbond
    Colour Family
    Yellow
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Kolorbond K2 Set - Shades of Yellow is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Kolorbond K2 Thinner

    For use with Kolorbond K2 and the brush grade version Kolorbond DecoPro a two pack PU coating which can be applied directly onto a variety of substrates including uPVC, metals, GRP and hard plastics.More Info Delivery Info

    Price £18.00 (ex. VAT)
    In Stock and Available for Delivery

    Kolorbond K2 Accelerator

    For use with Kolorbond K2 and the brush grade version Kolorbond DecoPro, two pack PU coatings which can be applied directly onto a variety of substrates including uPVC, metals, GRP and hard plastics. K2 Accelerator is used to accelerate the curing process of Kolorbond K2 and Kolorbond DecoPro when added at 2%.More Info Delivery Info...

    Price £48.00 (ex. VAT)
    In Stock and Available for Delivery

    Kolorbond WindowPrep

    Kolorbond WindowPrep is an alcohol based cleaner for use on PVCu prior to painting. It is very important that PVCu (uPVC) is cleaned with WindowPrep prior to painting; WindowPrep not only removes contaminants but also removes plasticizers from the surface of the PVCU and, additionally, opens the pores of the PVCu which greatly assists adhesion...

    Price £18.00 (ex. VAT)
    In Stock and Available for Delivery

    Kolorbond C425 Retarder

    Can be added to single pack, solvent based Kolorbond paints to slow down drying times. Very useful when spraying large panels or spraying large areas on site, the increased drying time allows the sprayer to keep a wet edge. It is also known as Kolorbond K2 Retarder and it may be added to Kolorbond K2 when spraying large areas subject to...

    Price £31.50 (ex. VAT)
    In Stock and Available for Delivery

    Kolorbond DecoPro

    A brushable version of Kolorbond K2 in 5,000 colours, a 2-pack PU coating applied directly onto a variety of substrates including PVCu (uPVC), GRP, polyester powder coated & anodised aluminium, stainless steel, hard plastics, cast iron and steel, galvanised and phosphated steel, composite doors and even glass.Individual components are...

    Price £63.45 (ex. VAT)
    In Stock and Available for Delivery