204 Fine Crack Repair is a two pack, solvent free, rapid curing, low viscosity epoxy resin designed for filling smaller cracks, voids and thin section `blow outs` or craters in concrete, brickwork and masonry.
204 Fine Crack Repair is a two pack, solvent free, rapid curing, low viscosity epoxy resin designed for filling smaller cracks, voids and thin section 'blow outs' or craters in concrete, brickwork and masonry.
It is ideal for effecting rapid repairs to concrete floors.
This product is for Professional Use Only.
| Technical Data | |
|---|---|
| 204 Fine Crack Repair | |
| Viscosity: | 400 cps @ 20°C |
| Specific Gravity: | 1.07 |
| 20°C Pot Life: | 10-15 minutes |
| Compressive Strength: | 80MPa |
| Adhesion to concrete: | 4.4 MPa (concrete failure) |
| Shore D Hardness: | 85 |
| Temperature range during application: | -3°C to +30°C |
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Mixing:
Mixing Ratio:
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Jon Francis on 2023-09-12 15:58:10 | Question: Hi, Can the 204 Fine Crack Repair be over painted with an epoxy floor paint with no or minimal abrading ? Thanks Jon |
Answer from Rawlins’ Technical Team: This product is normally applied to the concrete prior to the grinding process. Once the floor has been prepared by grinding it can be over painted. | |
| Anne Cupples on 2019-05-07 11:22:19 | Question: We have a drive in Creteprint and we have a small amount of damage the colour is black. Do you do a epoxy resin repair in a colour black. |
Answer from Rawlins’ Technical Team: Depending on the nature of the repair we could offer either 201 Epoxy Repair Mortar for larger surface repairs or 204 Fine Crack Repair will work well for smaller holes where the surface has blown. It will be up to you to decide whether a pourable resin or trowelable mortar would best fit for your repairs unless you can provide more information/images to our Technical Team. Both of these materials can be supplied in black (special order) but it’s unlikely that either will match what’s already down so you will have to take that into consideration. | |
| Julia Boston on 2018-09-04 18:24:18 | Question: Can the Fine Crack Repair resin be smoothed off before it dries? I have a concrete step that I want to make good, so I need to be able to get a smooth finish. Thanks |
Answer from Rawlins’ Technical Team: Apply the 204 Fine Crack Repair by gravity feed or by gunning or pumping into cracks. For filling voids and craters, simply fill by pouring. Once the resin has cured it can be ground down to level, or topped up if the level sinks. | |
| Bryce on 2015-08-12 11:31:53 | Question: Is 204 Fine Crack Repair only available in the colour amber? |
Answer from Rawlins’ Technical Team: Yes it is, but the Rust-Oleum Epoxyshield Fine Crack Repair is available in grey which is a similar product. | |
204 Fine Crack Repair is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins.Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual productMore...
£52.80 (incl. VAT)
£44.00 (ex. VAT)
