"

SikaCem 810

SikaCem 810 is a modified SBR polymer admixture. SikaCem 810 is a patented latex combination of SBR, silica fume and superplasticiser for bonding and improving mortars, renders and screeds.

Read Full Description

More details

£113.92 + VAT

SikaCem 810 is a one component modified SBR polymer, blended with plasticisers and selected fillers. SikaCem 810 is a patented latex combination of SBR, silica fume and superplasticiser for bonding and improving mortars, renders and screeds.

Uses:

SikaCem 810 when added to water in the correct ratio, then mixed with Cement and Sand/Aggregate is used to produce: 

  • Bond Coat/Slurry 
  • A Pourable Micro Concrete 
  • Renders 
  • Screeds with enhanced mechanical properties 

Features and benefits:

  • Improved Workability 
  • Improved Mechanical Properties, such as Abrasion and Impact 
  • Improved Resistance to Freeze/Thaw Cycles 
  • Reduced Shrinkage and Cracking 
  • Reduced Permeability 
  • Chloride Free 
  • Enhanced properties over unmodified SBR and Acrylic Resins

Send us your question

Question

What ratios are used with your Sikacem 810 25L. Thanks Scott

Scott from Bexlyheath (United Kingdom ) - 09/05/16

Answer

UseSikaCem 810: Water (L) RatioCement:
Sand: Agg (KG)
Thickness
layer Range
(mm)
Strength
N/mm²
(28 days)
Bond Coat
Floor Screeds/ renders
1 : 11 : 1 : 1
Normal Duty
Floor Screed*
10 : upto 1050 : 150 : 012 – 25>55
Heavy Duty
Floor Screed**
7.2 : upto 1450 : 75 : 75
Gravel / agg
3 - 6 mm
20 - 25>50
Render*7.2 : upto 1450 : 130 : 010 - 25>50
Pourable Micro
Cement***
7.2 : 12.5 : 0.550 : 85 : 110
Gravel/agg
5 – 10 mm
25 - 100>50 55

*Use Bond Coat

**Apply Semi Dry, Use Bond Coat

***Flow trials recommended

Sand to BS EN 12620 2002
Aggregates are calculated dry
Cement type : Ordinary Portland Cement
For Micro concrete use SikaPlast 15RM

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

SikaCem 810 TDS

Download

SikaCem 810 MSDS

Download