"

SikaLevel 30 Latex Ultra

SikaLevel 30 Latex Ultra View larger
Typical Coverage (per coat)5m² per 25kg at 3mm thick
Touch Dry2 Hours
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

SikaLevel 30 Latex Ultra is a high strength rapid setting cement based powder, which when mixed with water, can be used to level out uneven floors and screeds. It may be overlaid with common floor coverings or may be left as a final wearing surface and can be applied in one coat from 2-10mm in depth (25mm when filled).

Read Full Description

More details

£25.81 + VAT

SikaLevel 30 Latex Ultra is a high strength rapid setting cement based powder, which when mixed with water, can be used to level out uneven floors and screeds. SikaLevel 30 Latex Ultra may be overlaid with common floor coverings or may be left as a final wearing surface. SikaLevel 30 Latex Ultra will even accept light vehicular traffic and may be applied in one coat from 2-10mm in depth (25mm when filled).

Typical surfaces include concrete and screeding, existing unglazed ceramic tiles, brick, stone etc. When mixed as directed, the compound provides a free flowing mix that may be walked on in 2 hours and can be overlaid with ceramic tiles after only 3 hours at normal temperatures. NOTE: when overlaying with other floor coverings allow 24 hours drying time for each 10mm depth. Tested to EN13813 Class CT – C30-F7-AR 0.5.

Features & Benefits

  • Fast setting, foot trafficable within 2 hours, can be tiled within 3 hours
  • Interior & exterior use
  • Can withstand vehicular traffic
  • Final wearing coat, Overpaintable
  • Water and frost resistant
  • Application depth 2-10mm
  • Tested to EN13813 Class CT – C30-F7-AR 0.5

Areas For Use
For Levelling:

  • Wooden flooring
  • Floating floors
  • Floors with underfloor heating
  • Sand/cement screeds (not anhydrite), concrete slabs and pre-cast elements.
  • Existing ceramic and rigid plastic tiles.

Limitations

  • Always mix with clean fresh water and always prime floors as directed.
  • Always apply this product whilst primer coat is still damp.
  • The product will not resist rising damp. In these conditions, use in conjunction with D.P.M, liquid damp proof membrane as directed on the tin.
  • Never exceed the quantity of water stated. This will dramatically reduce strength and cause cracking.
  • Do not mix more compound than can be laid in 20 minutes and never try to reconstitute once the product has set.
  • Do not use over tarmac, asphalt or anhydrite screeds.
  • On substrates where under floor heating is in place, switch off the heating for 24 hours before and after application.
  • Do not use this product below 5°C.
  • Existing concrete screeds must be a minimum of 4 weeks old before overlaying with this product.
  • As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability for use. If in doubt, contact Technical Services Department.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

SikaLevel 30 Latex Ultra TDS

Download

SikaLevel 30 Latex Ultra MSDS

Download