- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product, but can recommend Instarmac UltraCrete Surface Defect Repair as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Ennis-Flint Pot Hole Repair, an environmentally-friendly thermoplastic repair system that is ideal for repairing cracks, small holes, footways and carriage-ways. Ideal for use on stable roads that have surface defects which require repair to ensure continued safety for road users.
- Easy-to-use, temporary crack and small hole repair system
- Road can be opened to traffic after approximately 15-20 minutes
- Reduces water seepage into existing cracks and potholes
- Strong thermoplastic bond created between thermoplastic material and bitumen surface, creating a durable repair system
- Additional anti-skid aggregate is used to ensure initial skid resistance
- Available in 11kg bags (material + aggregate)
Ennis-Flint Pot Hole Repair is an environmentally-friendly thermoplastic repair system that is ideal for repairing cracks, small holes, footways and carriage-ways. It is ideal for use on stable roads that have surface defects which require repair to ensure continued safety for road users.
This easy-to-use, durable repair solution is a heat-applied system that assists in preventative maintenance by reducing water seepage into existing cracks and potholes which worsen with additional moisture and water exposure.
Contents
11kg kit (made up of 10kg of Pothole Repair Thermoplastic material + 1kg of 1-3mm Chinese Bauxite Anti-Skid Aggregate)
Features & Benefits
- Environmentally-friendly product
- Easy-to-use, temporary crack and small hole repair system
- Road can be opened to traffic after approximately 15-20 minutes
- Designed for use on stable roads with cracks up to 40cm diameters and 45mm in depth
- Strong thermoplastic bond created between thermoplastic material and bitumen surface, creating a durable repair system
- Ideal for quick repairs with no expensive machinery required
- Additional anti-skid aggregate is used to ensure initial skid resistance
- Available in 11kg bags (material + aggregate)
Application
Installation Instructions
- Clean the application area thoroughly
- Pre-heat the area with the gas torch to ensure the area is free of moisture
- Pour in a layer of the EF Pothole Repair to a maximum level of 15mm. Heat the material to above 200°C with the gas torch until molten
- If the hole exceeds 15mm in depth, repeat step 3. Note: The maximum depth should not exceed 45mm and 40cm in diameter
- If skid resistance is required, post-sprinkle anti-skid aggregate while the material is still hot
- Once the material has cooled, check with a gloved hand that the surface is firm before opening the road back up to traffic
Data sheet
- Manufacturer
- Ennis-Flint
- Interior / Exterior Use
- Exterior
- For Use On
- Bituminous Surfaces
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 11KG
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Ennis-Flint Pot Hole Repair is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT