SikaBond Rapid DPM
  • SikaBond Rapid DPM

SikaBond Rapid DPM

SKBDRAPDPM5
SIK2497

SikaBond Rapid DPM is a solvent free reaction curing resin primer and damp proof membrane for cement based substrates.

Used for priming, consolidating and sealing of absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues. 

Features & Benefits

  • 1-part, ready to use.
  • Rapid drying (approx 45 minutes at 50% Rh & 20°C).
  • Compatible with all SikaBond wood floor adhesives.
  • Especially suited to refurbishment projects where old adhesive residues are present.
  • Suitable for underfloor heating.
  • Applied by roller or squeegee.

Colour
Size
£564.63(ex. VAT)
£677.56 (inc. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

SikaBond Rapid DPM is a solvent free reaction curing resin primer and damp proof membrane for cement based substrates.

Used for priming, consolidating and sealing of:

  • Absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues.
  • Can be used as a Damp Proof Membrane on sub-floors not under hydrostatic pressure.
  • Can be used over underfloor heating. (Max 3% moisture CM Method, 4.5% Tramex).

Features & Benefits

  • 1-part, ready to use.
  • Rapid drying (approx 45 minutes at 50% Rh & 20°C).
  • Compatible with all SikaBond wood floor adhesives.
  • Especially suited to refurbishment projects where old adhesive residues are present.
  • Suitable for underfloor heating.
  • Applied by roller or squeegee.

Limitations

  • SikaBond Rapid DPM is only to be used in well ventilated areas. Ensure adequate air ventilation during application and curing.
  • In areas such as basements, or other areas without a functional damp proof membrane preventing hydrostatic water vapour pressure, SikaBond Rapid DPM must only be installed after the application of Sikafloor 81 EpoCem. For detailed
  • instructions consult the Product Data Sheets or contact our Technical Department.
  • Do not use in conjunction with any other materials other than those recommended by Sika Limited.
  • Some concrete surface sealers can negatively influence the adhesion of SikaBond Rapid DPM. Pre-application trials are recommended. For further information or assistance please contact the Technical Department.
  • Installation on magnesite or on isolating bituminous layers is not recommended.
Product Details
SKBDRAPDPM5

Data sheet

Manufacturer
Sika
For Use On
Cement
Application Method
Roller, Squeegee
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
5L
UN Number
N/A
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions leonard on 2022-03-25 12:52:14
Question: 

Hi, I'm planning to use SikaBond Rapid DPM on a solid concrete slab and then place low profile Nu Heat Under Floor Heating. The max operating temperature of the UFH water pipes can be 55'C. Will your product have any issues at these operating temperatures? Thnaks, leonard

Answer from Rawlins’ Technical Team: 

The service temperature for this product is upto 35°C, unfortunately it would not be suitable for this application.


Question about the product

* Required fields
(read)
Send