Illbruck SP030 Fix & Seal Crystal Clear Adhesive is a totally clear, fast-curing adhesive-sealant for use in the sealing and bonding of glass panes. SP030 is flexible and suitable for a wide range of indoor applications.

Usage/Purpose:

Illbruck SP030 is a totally clear flexible seal-adhesive. Ideal for use in the sealing and bonding of glass elements in a wide range of interior applications where a transparent bond is required. Typical uses include bonding glass panes to aluminium or anodised frames (construction of display cases, caravan windows, retail units, glass lifts etc). This adhesive is compatible with metals and most materials used in construction work.

Benefits:

• For interior use
• A crystal clear adhesive-sealant ideal for transparent bonding of glass panes
• Advanced hybrid polymer formulation - a more environmentally friendly alternative to traditional PU adhesives
• Does not contain solvents or isocyanates - very low odour
• Aesthetic totally colourless
• Excellent adhesion to a wide range of materials including metals, glass, PVC and concrete
• Rapid skinning - tack free in approx. 10 minutes
• For detailed product information please see the Product Data Sheet

 Preparation:

• Always carry out a test to confirm compatibility prior to use
• Surfaces to be bonded must be clean, dry, dust-proof and degreased
• Roughen non-porous surfaces
• On materials such as glass, aluminium, ceramics, lacquered wood, PVC, epoxy and polyester, tests have shown that primer may be needed, but not always. For other materials, please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information

Application:

• Cut off end of thread with a sharp knife, avoiding damage to the thread
• Trim the nozzle to the required diameter
• Ensure good contact between the joint surfaces before applying adhesive
• Apply a bead of adhesive to one or both surfaces
• For larger bond areas, spread the adhesive immediately using a notched spreader
• Bring the two components together immediately and hold together for at least 5 minutes until sufficient bond strength has developed
• Sufficient working strength will normally develop after 5 -10 minutes

Technical Data:

Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.