SikaCem 810
  • SikaCem 810

SikaCem 810

102139

SikaCem 810 is a modified SBR polymer admixture. It is a patented latex combination of SBR, silica fume and superplasticiser for bonding and improving mortars, renders and screeds. 

Features and benefits:

  • Improved workability
  • Improved mechanical properties, such as abrasion and impact
  • Improved resistance to freeze/thaw cycles
  • Reduced shrinkage and cracking
  • Reduced permeability
  • Chloride free
  • Enhanced properties over unmodified SBR and acrylic resins
Size
£111.80
VAT excluded

£134.16 Tax incl.
Quantity

questions  1 question about the product
Description

SikaCem 810 is a one component modified SBR polymer, blended with plasticisers and selected fillers. SikaCem 810 is a patented latex combination of SBR, silica fume and superplasticiser for bonding and improving mortars, renders and screeds.

Uses:

SikaCem 810 when added to water in the correct ratio, then mixed with Cement and Sand/Aggregate is used to produce:

  • Bond Coat/Slurry
  • A Pourable Micro Concrete
  • Renders
  • Screeds with enhanced mechanical properties 

Features and benefits:

  • Improved Workability
  • Improved Mechanical Properties, such as Abrasion and Impact
  • Improved Resistance to Freeze/Thaw Cycles
  • Reduced Shrinkage and Cracking
  • Reduced Permeability
  • Chloride Free
  • Enhanced properties over unmodified SBR and Acrylic Resins

For more details please download the product data sheet from the 'DATASHEETS' tab above.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
102139

Data sheet

Manufacturer
Sika
Single, Two or Three Pack
Single
Pack Size
25L
Attachments
Download
Product Data Sheet
Download
Safety Data Sheet
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Send us your question

questions Scott on 2016-05-09 05:51:23
Question: What ratios are used with your Sikacem 810 25L. Thanks Scott
Answer: 
Use SikaCem 810: Water (L) Ratio Cement:
Sand: Agg (KG)		 Thickness
layer Range
(mm)		 Strength
N/mm²
(28 days)
Bond Coat
Floor Screeds/ renders		 1 : 1 1 : 1 : 1
Normal Duty
Floor Screed*		 10 : upto 10 50 : 150 : 0 12 – 25 >55
Heavy Duty
Floor Screed**		 7.2 : upto 14 50 : 75 : 75
Gravel / agg
3 - 6 mm		 20 - 25 >50
Render* 7.2 : upto 14 50 : 130 : 0 10 - 25 >50
Pourable Micro
Cement***		 7.2 : 12.5 : 0.5 50 : 85 : 110
Gravel/agg
5 – 10 mm		 25 - 100 >50 55

*Use Bond Coat

**Apply Semi Dry, Use Bond Coat

***Flow trials recommended

Sand to BS EN 12620 2002
Aggregates are calculated dry
Cement type : Ordinary Portland Cement
For Micro concrete use SikaPlast 15RM

Question about the product

* Required fields
(read)
Send
Trustpilot