Instarmac UltraCrete FTC (Fast Track Concrete)

    FTC4MM
    INS4233

    Instarmac UltraCrete FTC (Fast Track Concrete) is a fibre modified concrete, suitable for small and large reinstatements to car parks, warehouses and bridge decks.

    • Shrinkage compensated 
    • High compressive strength 66N/mm²
    • Foot traffic: 2 hours
    • Pre-blended, just add water

    Colour
    Size
    Pallet Quantity
    £1,060.75(ex. VAT)
    £1,272.90 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Instarmac UltraCrete FTC (Fast Track Concrete)

    FTC is fibre modified concrete, suitable for small and large reinstatements to car parks, warehouses and bridge decks. It has an impressive compressive strength of 66N/mm² and can receive foot traffic after 2 hours.

    • Workability: 20 minutes
    • Set time: 60 minutes
    • Depth: 10mm – 50mm
    • Pre-blended – just add water
    • Shrinkage compensated

    Applications

    UltraCrete FTC is a high strength, fast set concrete, suitable for small and large section reinstatements to car airports, warehouses and bridge decks. With an initial set of 1 hour, the product can accommodate depths from 10-50mm (up to 100mm in pockets)

    Technical

    FTC is supplied in a 4mm aggregate formulated using a special blend of both aggregates and cements. The product does not contain metallic aluminium, iron or carbon and is chloride free, therefore eliminating the problems of corrosion and staining. UltraCrete FTC complies with the Highways Agency Specification for Highway Works, clause 1704.6 Control of Alkali Silica Reaction.

    Preparation

    Apply FTC to a sound, clean surface free from contaminants and dust. The substrate should be roughened and scabbled to provide a good bond key. Metal surfaces or reinforced steel must be drained so that all rust and scale is removed. These should also be free from oil, grease and paint. It is essential that the repair edges are saw cut square to a minimum depth of 10mm. Feather edging is not recommended.

    Priming

    Remove any dust by vacuum or brush prior to commencing the priming operation. The concrete/masonry surface should then be thoroughly soaked with water. Ensure any surplus water is removed before priming.

    Mixing

    Add 2.5 litres of clean water to a freefall mixer or mixing vessel and slowly add the entire contents of the bag. Mix for 3 minutes. The final mixed material should have a firm concrete consistency.

    Further instructions on preparation, priming and mixing can be found on the product data sheet.

    Product Details
    4233-781367

    Data sheet

    Manufacturer
    Instarmac
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Single
    Product Certifications
    Complies with the Highways Agency Specification for Highway Works, clause 1704.6 Control of Alkali Silica Reaction
    Pack Size
    25KG Bag
    Parts
    1 Part
    Key Features
    Workability: 20 minutes. Set time: 60 minutes . Depth: 10mm – 50mm . Pre-blended – just add water. Shrinkage compensated
    Compressive Strength (at 20°C)
    4 hours 13.00 24 hours 17.00 7 days 50.00 28 days 64.00
    Tensile Strength
    7 days 2.60 28 days 4.00
    Flexural Strength (at 20°C)
    7 days 3.40 28 days 4.1
    Shelf Life (from date of manufacture)
    Shelf life in correct conditions for sealed bags is 8 months. High temperatures and high humidity will lead to a reduced shelf life.
    Size
    25kg bag
    UN Number
    N/A
    Suitable For Use On
    Concrete
    Product Usage Type
    Concrete
    Product Range
    Ultracrete
    Colour Family
    Grey
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Instarmac UltraCrete FTC (Fast Track Concrete) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Instarmac UltraCrete QC10 F Rapid Set Flowable Concrete

    A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs.HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutesCoverage Calculator

    Price £1,072.51 (ex. VAT)
    In Stock and Available for Delivery

    Instarmac UltraCrete QC10 Rapid Strength Concrete

    Designed for thick section repairs, haunching reinstatements, ironwork backfilling and commerical sign/post installation.HAPAS Approved since 2005 20N/mm² compressive Rapid set: 10-20 minutes strength in 2 hours Open to traffic: 2 hours • Shrinkage compensatedMore Information Delivery Info

    Price £1,031.74 (ex. VAT)
    In Stock and Available for Delivery

    Instarmac UltraCrete QC6 Surface Reinstatement Concrete

    Instarmac UltraCrete QC6 Surface Reinstatement Concrete is a non-shrink concrete designed for the surface reinstatement of ‘picture frames’ or fillets around access covers and surface areas around street furniture.Shrinkage compensated Excellent workability Rapid set: 15 minutes BT Approved Anti-vandal Open to traffic: 4 hours...

    Price £1,314.88 (ex. VAT)
    In Stock and Available for Delivery

    Instarmac UltraCrete Flowcon Self-Compacting Concrete

    Instarmac UltraCrete Flowcon Self-Compacting Concrete is a high specification C40 concrete in a bag, ideal for applications with limited site access where bulk concrete cannot be delivered.Easily transportable Flowable Pre-blended cement for a consistent mix High compressive strength 55N/mm² Please note: This product is subject to a...

    Price £533.90 (ex. VAT)
    In Stock and Available for Delivery

    Instarmac UltraCrete Super Fix Single Part Post Mix

    For the installation of light duty posts, fences and polesLight duty applications Rapid set: 15 minutes Pre-blended, just add water 25N/mm² compressive strength Please note: This product is subject to a minimum order quantity of 2 x pallet layers of 56 x 25kg bags (112 x 25kg bags in total)More Information Delivery Info

    Price £402.98 (ex. VAT)
    In Stock and Available for Delivery

    Instarmac UltraCrete Post Fix Rapid Hardening Concrete

    A 10mm concrete formulated for sub-surface use and fast installation of posts, signs, fences, street lighting, speed cameras and road side barriers.Professional grade Easy mix Fast set 41N/mm² compressive strength Two-part mix Please note: This product is subject to a minimum order quantity of 2 x pallet layers of 56 x 25kg Bags (112...

    Price £550.37 (ex. VAT)
    In Stock and Available for Delivery