Fosroc Solvent 102
Fosroc Solvent 102 is a cleaning solvent for use with the Fosroc range of products.More Information Delivery Info
£185.82 (incl. VAT)
£154.85 (ex. VAT)
Fosroc Conbextra EP10 is a two component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar.
Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical spillage may occur.
Conbextra EP10 is for grouting gap thicknesses from 0.25 to 10 mm. Comprising of a low viscosity unfilled epoxy resin system which is mixed and poured into the gap. For larger gap widths from 10mm to 120mm please see Fosroc Conbextra EPR.
Please see the Product Data Sheet for detailed information.
During application:
Exotherm:
In Service:
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Fosroc Conbextra EP10 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Fosroc Solvent 102 is a cleaning solvent for use with the Fosroc range of products.More Information Delivery Info
£185.82 (incl. VAT)
£154.85 (ex. VAT)
Fosroc Conbextra EPR is a three component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
£272.57 (incl. VAT)
£227.14 (ex. VAT)
Fosroc Lokfix S25 is a two component polyester resin anchoring grout meeting the requirements of BS EN 1504-6 - Anchoring of reinforced steel bars. Suitable for use for anchoring of steel bars into concrete, brickwork, masonry and rock. Recommended applications include installation of starter bars, base plate bolts, MOT Bolts, installation...
£50.36 (incl. VAT)
£41.97 (ex. VAT)