When you paint a concrete floor the paint highlights chips or scratches in the surface, especially if the paint is glossy. Imperfections will be highlighted which probably were not noticeable before and the finished result can be disappointing. Spending an hour just smearing Watco Concrex Fine Filler over these imperfections will leave a smooth surface ready for painting. When the floor is painted it will have a professional look about it.
Surfaces should be clean, sound and free from dust, oil, grease or other contaminants. Some surface dampness can be tolerated, but surfaces should not be wet.
Mixing
Wear the gloves provided in the pack.
Using the spatulas provided, take equal sized portions of the resin (off white), and curing agent (black), and mix them together thoroughly on a suitable mixing board until they are a uniform grey colour.
The ideal mixing ratio is 1:1 by weight or volume – you should try to estimate equal quantities as closely as possible, but there is no need to weigh or measure them. Mix small, manageable amounts together at any one time, and no more than can be used in 15 - 20 minutes.
Application
Using the plastic scraper provided, immediately smear the mixed components over the repair and smooth off. This is made easier by wiping the plastic scraper with a cloth dampened with white spirit.
The repair can be over painted with any Watco products after only 1 - 2 hours.
Product Details
9281-947000
Data sheet
Manufacturer
Watco
For Use By
Professional Use
For Use By
Consumer Use
For Use By
Industrial Use
For Use On
Concrete, sand & cement and metal
Application Method
Spreader, spatula, gloves - supplied
Single, Two or Three Pack
Two-Pack
Pack Size
1.5KG
Maximum Applied Thickness
Up to 5mm. For depths greater than this build up in layers or use Watco Concrex Carbon Fibre
Dry to Recoat (at 20°C)
1 hour
Fully Cured (at 20°C)
4 days
Pot Life (at 20°C)
10 -15 minutes
Coverage
A 1.5kg pack makes approximately 1 litre of filler
Recommended Thinner/Cleaner
The plastic scraper provided for applying should be wiped clean with white spirit or a similar solvent before the Concrex Fine Filler cures.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Watco Concrex Fine Filler is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Permanent granite hard repairs where ordinary mortars fail. For super strength long lasting repairs to concrete floors, ramps & steps. The strongest, longest lasting epoxy floor repair mortar that you can buy!Stronger than cement-based alternatives Faster drying, ready for traffic in just 1 hour 20-year guarantee against impact and...