SikaCem 810 is a modified SBR polymer admixture. SikaCem 810 is a patented latex combination of SBR, silica fume and superplasticiser for bonding and improving mortars, renders and screeds.
SikaCem 810 is a one component modified SBR polymer, blended with plasticisers and selected fillers. SikaCem 810 is a patented latex combination of SBR, silica fume and superplasticiser for bonding and improving mortars, renders and screeds.
SikaCem 810 when added to water in the correct ratio, then mixed with Cement and Sand/Aggregate is used to produce:
- Bond Coat/Slurry
- A Pourable Micro Concrete
- Screeds with enhanced mechanical properties
Features and benefits:
- Improved Workability
- Improved Mechanical Properties, such as Abrasion and Impact
- Improved Resistance to Freeze/Thaw Cycles
- Reduced Shrinkage and Cracking
- Reduced Permeability
- Chloride Free
- Enhanced properties over unmodified SBR and Acrylic Resins
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Scott on 09/05/2016|
Question: What ratios are used with your Sikacem 810 25L. Thanks Scott
*Use Bond Coat
**Apply Semi Dry, Use Bond Coat
***Flow trials recommended
Sand to BS EN 12620 2002
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close