Rust-Oleum Epoxyshield Concrete Repair Mortar is for levelling and repairing cracks, holes and other damages in concrete, cement renderings and unpainted brickwork:
Rust-Oleum Epoxyshield Concrete Repair Mortar is for levelling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork:
Features & Benefits
Powdered repair product on cement base and resins for inside and outside use.
Surface Preparation:
On bare substrate: clean with steel brush or sand blaster. The substrate must be solid and free from dust, oil and grease.
Porous substrates must be moistened first.
Metal parts are to be treated with an anti-rust primer (CombiPrimer 3369/3380 or Hard Hat 2169/2182).
Application Conditions:
Apply at a temperature of min. 5°C.
Application and Thinning: Rake / Trowel
Mixing & Thinning: Mixing ratio: Approximately 5 parts of powder to 1 part of water (2 litres of water for the entire 10 KG). Fill the container with the water. Add the dry mortar to the water whilst stirring. Mix water and powder thoroughly to a thick smooth, lump-free substance. Add some water to your liking if the mortar is too dry.
Application: Apply the product with the included trowel or spatula up to a maximum layer thickness of 2 cm. Wet the trowel to smooth out any trowel marks or irregularities. After 48 hours the surface can be sanded using a rough sandpaper (P120) to obtain a smooth end result.
Cleaning of Equipment and Spills
Water
Remarks
The mortar can now be over coated with EpoxyShield coatings or other non-alkyd paints like Epoxies, Acrylics, etc. If thicker layers are necessary (> 2 cm) the mortar can be mixed with kiln dried quartz sand. Mixing ratio: 1 volume part mortar plus 0,3 to 0,5 volume parts of kiln dried quartz sand (0 - 4 mm).
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum Epoxyshield Concrete Repair Mortar is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum Hard Hat 2169/2182 Anti-Rust Primer is to be used on new, bare or slightly rusted steel surfaces to prevent further rusting and corrosion. Ready to recoat after just 10 minutes, to handle after 30 min. Penetrates deeply into the surface and does not give rust a chance Grey for light coloured topcoats and red for dark coloured...
£13.84 (incl. VAT)
£11.53 (ex. VAT)
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion is a high quality anti-rust primer for Rust-Oleum CombiColor. The Anti-Corrosion Primer will ensure an even longer anti-rust protection on new or rusted steel surfaces and provides and enhances protection against corrosion.Recoatable after 2 hours For new / slightly rusted surfaces Grey for...
£10.42 (incl. VAT)
£8.68 (ex. VAT)
Repair Materials Application Kit provides everything you need to apply our repair products to floors, walls and other surfaces. It makes on site application much easier by providing everything you need to mix, prepare, apply and clean up in one handy kit. Each Kit Contains:4 Rubble Sacks for Waste 750ml White Spirit 10" Steel Float 6"...
£36.76 (incl. VAT)
£30.63 (ex. VAT)
