SikaProof Patch 200 B is a self-adhesive tape, consisting of a SikaProof membrane laminated with a Sikaproof Butyle adhesive that is covered with a release liner. SikaProof Patch 200 B is used for post-sealing of joints, penetrations as well as damages outside on the membrane side of the SikaProof A05/A08/A12 system.
Sikaflex PRO-3 (available in packs of 20x 600cc sausages) is a 1-part, high performance, chemical and abrasion resistant polyurethane sealant for interior and exterior flooring and water industry applications.
Sikaflex PRO-3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance. Sikaflex PRO-3 is a one part chemical and abrasion resistant polyurethane sealant for floors and water industry applications.
Sikaflex PRO-3 can be used for the following indoor and outdoor applications:
- Movement and connection joints in floors
- Pedestrian and traffic areas
- Warehouses and production areas
- Applications in the food industry
- Joints in waste water and sewage treatment plants
- Floor joints in tunnel construction
- Applications in cleanrooms
Features and Benefits:
- Movement capability of 25% (ISO 9047)
- Movement capability of 35% (ASTM C 920)
- Very high mechanical and chemical resistance
- Bubble-free curing
- Very good adhesion to most construction materials
- Solvent free and odourless
- Very low emission
Sikaflex PRO-3 can be cleaned with Sika Remover 208 or Sika Thinner C.
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
SikaBoom GS (Gun Grade) is used for fixing, insulating and filling connection joints around window and door frames, around air-conditioning vents and roller blind housings etc. It is also used for insulation against sound, cold and draughts etc.
SikaSeal 146 Building Silicone is a low modulus, neutral cure RTV silicone sealant that adheres to a wide range of both porous and non porous surfaces without the need for priming - including glass, metals, plastics and wood, low dirt pick up, excellent flexibility, excellent external weathering properties, suitable for use on polycarbonate. Image...
Sika Boom FR is a one part, high yield, fire-retardant polyurethane foam ideal for sealing pipes penetrating through brickwork and openings in walls, and for insulting between brickwork and cladding, around ducting and through cavities carrying pipes and cables where fire protection is required.
Remmers Injection Mortar is a fluid mineral filling and injection mortar for strengthening hollow cavity and loose masonry work according to WTA Code of Practice 4-3-98-D. It is also used for filling joints, especially when replacing stones and filling bore holes after impregnation or injection against rising damp in masonry in the Remmers Kiesol System....
Sika Concrete Crack Repair is a two part grey epoxy paste, mix in the tube adhesive for high strength repairs to concrete. Can be injected into cracks, can be used on damp concrete, excellent adhesion, economic - only use as much as required, can be applied in vertical and overhead situations, resistant to water, chemicals and solvents.
SikaBond AT Metal is a one part, solvent-free, elastic adhesive for porous and non-porous substrates, particularly for metals and for the following applications: Internal and external bonding of metal façade and roof elements, roof coverings, cover plates, metal sheets, sky lights, bonding of metal cladding etc. Excellent workability, short cut off...
Sikaflex 11 FC+ (available as a pack of 12 x 300cc or 20 x 600cc cartridges) is a 1-part elastic joint sealant and multipurpose adhesive based on polyurethane that is suitable for indoor and outdoor applications.
Sikaflex Floor (available in packs of 20x 600cc sausages) is a 1-part, solvent free, PU based moisture cured, elastic sealant that provides a cost effective floor joint sealant system for industrial pre-cast concrete. Image already added
SikaProof Tape 150 A is a self-adhesive tape, based on a Polyacrylate-adhesive on a yellow carrier film coated with the SikaProof A fully bonded sealant and fleece system. SikaProof Tape 150 A is used for sealing transverse overlap joints, connections and details within the SikaProof A membrane system (internal / fleece side) in combination with the...
Sika Injection 306 is a very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time. Adjustable curing time between 8 and 50 minutes, permanently elastic, can absorb limited movements, capable of reversibly absorbing (swelling) about 75% by weight and releasing (shrinking) moisture, solvent free acrylic resin, high...
Sikasil Pool is a one part neutral curing silicone sealant for use in swimming pools and permanently wet areas. It is suitable for joints in and around swimming pools, areas under permanent water immersion and frequently wet areas, such as shower rooms in sports halls or leisure facilities, between ceramics, tiles, concrete, glass, metals and other...
Sika Sanisil Sanitary Silicone is an acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. Specifically designed for sanitary applications, it contains a powerful fungicide to prevent mold growth which will not discolour on aging even in humid/damp conditions. Image already added