Sika Plastix 48N Contractors Grade Silicone Sealant is a low modulus, neutral curing silicone sealant suitable for many construction and industrial applications, but particularly suited for all façade and roofline applications. Certified to: EN15651-1 type F EXT-INT-CC, Class F12.5E, EN15651-3 type S, Class XS3. Image already added
SikaHyflex 250 Facade
SikaHyflex 250 Facade is a high-performance over paintable 1-part professional weatherproofing sealant for concrete, masonry and EIFS facades. SikaHyflex 250 Facade is a 1-part, moisture curing, and low modulus elastic joint sealant suitable for movement and connection joints in commercial building envelopes.
SikaHyflex 250 Facade is a high-performance over paintable 1-part professional weatherproofing sealant for concrete, masonry and EIFS facades.
SikaHyflex 250 Facade is a 1-part, moisture curing, and low modulus elastic joint sealant suitable for movement and connection joints in commercial building envelopes.
Features & Benefits
- Very good weathering and ageing resistance
- Movement capability of +100/-50 % (ASTM C719)
- Bubble-free curing
- Low stress to the substrate
- Easy to smooth and very good workability
- Very good adhesion to many substrates
- Solvent free and odourless
- Very low emission
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
SikaSeal 140 Multi Purpose Silicone is an acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a fungicide to prevent in product mould growth. Certified under the harmonized European standard EN15651 for façade, cold climate and sanitary applications in compliance with the...
Sika Injection 304 is a very low viscous, elastic and very quick-gelling polyacrylic injection gel. The material reacts to form a waterproof, elastic but solid gel with good adhesion to both dry and wet substrates. Used for making new sealing surfaces (curtains) in damp or water saturated ground conditions, situated in close proximity to the building...
Sikaflex Floor (available in packs of 20x 600cc sausages) is a 1-part, solvent free, PU based moisture cured, elastic sealant that provides a cost effective floor joint sealant system for industrial pre-cast concrete. Image already added
SikaProof ExTape 150 is a self-adhesive tape, consisting of a butyl rubber adhesive that is covered with a divided release liner. SikaProof ExTape 150 is used to adhere and seal joints and overlaps of the SikaProof A sheet membrane system, as well as to execute details and connections where required on the membrane layer side of the system.
Remmers Epoxy Crack Fix is a very fast reacting, transparent epoxy resin for fast, frictionally coupled filling of cracks and false joints on cement screeds and concrete. Depending on the crack depth, each pack will yield up to 5 running metres. Cures very quickly, plasticizer-free, good penetration capacity, can be subjected to heavy...
Sikadur 41 CF Rapid is a moisture tolerant, thixotropic, structural three part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +5°C and +20°C. Hardens without shrinkage, no primer needed, can be used for vertical and overhead applications (low sag), easy to mix and apply,...
Keim Spachtel is a silicate filler is ready to use and suitable for small crack repair and surface equalisation onto mineral surfaces. Top Advantages Purely mineral filler Potassium waterglass emulsion Interior and exterior use Apply with spatula This product is available as POA. Click here to email us for more information
Sika FloorJoint PD is a prefabricated, carbon-fibre reinforced polymer composite panel with high physical properties. Because of the waved joint design an improved load distribution is achieved. Used as a floor joint panel for new build and refurbishment of joints for concrete screeds with normal up to medium heavy wear e.g. for car parks.
Sika InjectoCem 190 is a two part injection grout based on micro cement (d95 < 9.5μm) with added corrosion inhibitors. Used for injection of the Sika Injectoflex System, filling of voids, final rigid cementitious sealing of cracks, encasement of filler joists. It also provides simultaneous corrosion protection of steel reinforcement.
Sika Firesil-N is a 1-part, neutral curing, flame retardant silicone sealant suitable for indoor and outdoor applications. Suitable for applications in the construction industry and industrial areas where high standards are set in respect to flame retardance of the material.
Remmers IR PUR 2K 150 is a two-component, flexible PUR injection resin for sealing water-bearing cracks and porous, water-soaked areas in concrete and masonry, grouting of construction joints and dilatable filling of cracks.
Sika MaxTack Ultra Clear is a 1-component, solvent-free, multipurpose sealant and adhesive with a crystal clear appearance. Designed as a multipurpose adhesive and is suitable for most surfaces including metal, glass, concrete, plaster, plasterboard, wood surfaces, painted enamel, polyester and plastics. Image already added
SikaBond AT Metal is a one part, solvent-free, elastic adhesive for porous and non-porous substrates, particularly for metals and for the following applications: Internal and external bonding of metal façade and roof elements, roof coverings, cover plates, metal sheets, sky lights, bonding of metal cladding etc. Excellent workability, short cut off...