SikaBoom GS (Gun Grade) is used for fixing, insulating and filling connection joints around window and door frames, around air-conditioning vents and roller blind housings etc. It is also used for insulation against sound, cold and draughts etc.
SikaFuko Eco 1 CombiPack
SikaFuko Eco 1 is an injectable hose system to seal construction joints in watertight structures against water and salt water ingress. It is cast into the construction joints with the concrete. When it is necessary to seal or reseal the construction joints, it can be injected with the most suitable Sika Injection materials based on acrylic and polyurethane resins or microfine cement suspensions.
SikaFuko Eco 1 is an injectable hose system to seal construction joints in watertight structures against water and salt water ingress. SikaFuko Eco 1 is used to seal construction joints in watertight structures against water and salt water ingress. It is cast into the construction joints with the concrete.
When it is necessary to seal or reseal the construction joints, SikaFuko Eco 1 can be injected with the most suitable Sika Injection materials based on acrylic and polyurethane resins or microfine cement suspensions.
Features & Benefits
- Re-injectable with Sika acrylic resins and microfine cement suspensions
- One time Injectable with Sika polyurethane injection resins
- Highly economical
- Ideal back-up solution for combination with waterstops
- Easy to install
- Tested in water pressures up to 10 bar (100m)
- Suitable for many different structures and construction methods
SikaFuko Eco 1 is supplied as a Combi-pack in a cardboard box containing:
- 200 m SikaFuko® Eco 1
- 10 m green PVC-hose (inlet)
- 10 m white PVC-hose (outlet)
- Accessories (2m connecting pipe, 4m heat shrink sleeve, x 50 closure plugs, 1 can of glue, 1 roll of tape, x 800 fastening clips)
For more details please download the product data sheet from the 'DATASHEETS' tab above. It is important that the manufacturer is contacted before use of these systems as a site visit/written specification may be required prior to use of these systems to ensure correct installation and suitability for the project in question.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sika Expansion Tape 100 is an impregnated sealing tape used to protect from draught and dust as well to reduce heat loss and improve acoustics. Sika Expansion Tape 100 is used to seal joints between window / door frames and adjacent building components. Open vapour diffusion structure, permanently elastic, sound and thermal insulation.
Rust-Oleum 5160 Flexible Joint Filler is a pourable flexible polyurethane joint filler with excellent wear and chemical resistance for expansion joints and other floor joints: Remains flexible to allow the floor to expand and collapse Durable polyurethane product Good resistance against oils and chemicals Non-cracking For indoor and...
Sika Waterbar made from PVC-P can be used as flexible waterstops and are designed for the sealing of movement (expansion) and construction joints in new watertight concrete structures. Sika Waterbar are available in a range of different types, shapes and sizes to suit different types of structures and joint sealing applications.
Sika Injection 201 CE is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible. Used for permanent watertight sealing with some flexibility to absorb limited movement, in dry, damp or water-bearing cracks and joints in...
Sikasil Pool is a one part neutral curing silicone sealant for use in swimming pools and permanently wet areas. It is suitable for joints in and around swimming pools, areas under permanent water immersion and frequently wet areas, such as shower rooms in sports halls or leisure facilities, between ceramics, tiles, concrete, glass, metals and other...
Remmers IR PUR 250 is a flexible one-component PUR injection resin for sealing of water-bearing cracks and porous, water-soaked areas in concrete and masonry. It is waterproofing, has very good penetration, reacts with moisture: contact with water is necessary for the reaction and hardening of the foam, resistant against damaging soluble...
Sikaflex 512 Caravan (available in packs of 12x 300cc cartridges) is a multi-purpose, non-sag, elastic, one component sealant based on a polyurethane hybrid compound, which cures on exposure to atmospheric humidity to form a durable elastomer. Suitable substrate materials are timber, metals, metal primers and paint coatings, ceramic materials and...
Sikaflex 252 (pack of 12x300ml cartridges) is a non-sag, 1 component polyurethane adhesive of stiff, paste-like consistency that cures on exposure to atmospheric humidity to form a durable elastomer. Sikaflex 252 is suitable for use with timber, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics. Non-corrosive, can be...
Sikaflex 521 UV (available as a pack of 12 x 300cc or 20 x 600cc cartridges/sausages) is a one-component PUR-Hybrid sealant based on the Sika Silane Terminated Polymer (STP) technology. The product cures on exposure to atmospheric humidity to form a durable elastomer. Ageing and weathering resistant, it bonds well to a wide variety of substrates. Image...
Remmers IR Epoxy 360 is a rigid epoxy injection resin used for friction locked bonding and glueing, filling of cracks and void in concrete, glueing of detached concrete and screeds, attaching of tension anchors and grouting of construction joints. Low viscosity, high adhesive power, high adhesion to joint flanks, volume and form-locking,...
Sika Concrete Crack Repair is a two part grey epoxy paste, mix in the tube adhesive for high strength repairs to concrete. Can be injected into cracks, can be used on damp concrete, excellent adhesion, economic - only use as much as required, can be applied in vertical and overhead situations, resistant to water, chemicals and solvents.
SikaSeal 147 Decorators Caulk is a high quality, fast drying flexible acrylic filler and sealant which can be overpainted with all paint types, or covered over with wallpaper. Excellent slump resistance, ideal for sealing and filling cracks and gaps prior to decorating, use around skirting boards, ceiling cornices, window and door frames, stair treads and...
Sika Injection 304 is a very low viscous, elastic and very quick-gelling polyacrylic injection gel. The material reacts to form a waterproof, elastic but solid gel with good adhesion to both dry and wet substrates. Used for making new sealing surfaces (curtains) in damp or water saturated ground conditions, situated in close proximity to the building...