SikaFuko VT 2 CombiPack

SikaFuko VT 2 is an injectable hose system with unique integral ‘valves’ for sealing and possibly resealing construction joints in watertight structures against water and salt water ingress.

SikaFuko VT 2 is cast into the construction joints with the concrete. To seal the joint SikaFuko VT 2 can be injected with suitable Sika injection materials including acrylic and polyurethane resins, or microfine cement suspensions. When it is necessary to reseal the joint again by re-injection, provided Sika acrylic resin or microfine cement is used for the initial injection.

Features & Benefits

• Uses unique valve techniques for injection
• Re-Injectable with cement, Sika acrylic resins and microfine cement suspensions
• One-time Injectable with Sika polyurethane and epoxy resins
• Easy to install
• Tested in water pressures up to 5 bar (50m)
• Suitable for many different structures and construction methods
• Long-term references on many international projects

The SikaFuko VT 2 is supplied as a Combi-pack in a cardboard box containing:

• 125m Sika Fuko VT 2
• 10m green PVC-hose (inlet)
• 10m white PVC-hose (outlet)
• Accessories (2m connecting pipe, 4m heat shrink sleeve, x 50 closure plugs, 1 can of glue, 1 roll of tape, x 800 fastening clips)

For more details please download the product data sheet from the 'DATASHEETS' tab above. It is important that the manufacturer is contacted before use of these systems as a site visit/written specification may be required prior to use of these systems to ensure correct installation and suitability for the project in question.