SikaProof Tape 150 A is a self-adhesive tape, based on a Polyacrylate-adhesive on a yellow carrier film coated with the SikaProof A fully bonded sealant and fleece system. SikaProof Tape 150 A is used for sealing transverse overlap joints, connections and details within the SikaProof A membrane system (internal / fleece side) in combination with the...
Sika Injection 306
Sika Injection 306 is a very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time. Adjustable curing time between 8 and 50 minutes, permanently elastic, can absorb limited movements, capable of reversibly absorbing (swelling) about 75% by weight and releasing (shrinking) moisture, solvent free acrylic resin, high pH-value of 9 to 10.
Sika Injection 306 is a very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time.
- Sika Injection 306 is used for the injection of SikaFuko injection hoses to seal construction joints
- Sika Injection 306 is used to seal water-bearing cracks and voids
- Sika Injection 306 is used for making new sealing walls (curtains) in damp or water saturated ground conditions, situated in close proximity to the building component or within the building structure
- Sika Injection 306 is used as a post-construction, external injection sealing system for construction and limited movement expansion or drainage pipe joints, that are, or will be, covered with damp or water saturated soil
- Sika Injection 306 can also be used for the repair by injection of damaged waterproofing membranes (single and double layer system)
Features & Benefits
- Adjustable curing time between 8 and 50 minutes
- Permanently elastic, can absorb limited movements
- Capable of reversibly absorbing (swelling) about 75% by weight and releasing (shrinking) moisture
- Solvent free acrylic resin
- High pH-value of 9 to 10
- Very low viscosity comparable to that of water
- Cured Sika Injection 306 is insoluble in water and hydrocarbons and resistant to acids and alkalis
- Environmentally friendly, can be used in ground water protection zones
For more details please download the product data sheet from the 'DATASHEETS' tab above. It is important that the manufacturer is contacted before use of these systems as a site visit/written specification may be required prior to use of these systems to ensure correct installation and suitability for the project in question.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
International Interline 921 is a two component, solvent free, chemically resistant epoxy phenolic caulking compound formulated to provide ease of application, and greater flexibility in scheduling of tank lining applications.
Remmers Betofix HQ2 is a sealing mortar with high early strength that is swellable, water impermeable and resistant to frost and deicing salt. For indoor and outdoor use, mineral substrates in dry, damp and wet areas, packing and mounting mortar for connecting machines, iron and concrete structures as well as wood elements. Image already added
Sikaflex Construction+ (available in packs of 20 x 600cc sausages) is a 1-part, moisture curing, flexible sealant suitable for movement and connection joints in concrete and masonry facades. Image already added
Sika Boom GS is a 1-part, expansive, gun applied polyurethane fixing foam used for fixing, insulating and filling connection joints and for insulation against sound, cold and draughts etc.
Sikaflex AT Facade (packs of 20 x 600cc sausages) is a 1-part, moisture curing elastic sealant suitable for joint sealing of movement and connection joints between same or different porous and non-porous substrates such as concrete, brick, steel and other metals etc. Silicone free and over-paintable, odourless and solvent-free, good weathering and ageing...
Sika Expansion Tape 600 is a constant elastic polymer dispersion impregnated PUR sealing tape. It fulfils the requirements of the energy conservation regulations (EnEV) and the RAL instructions. Sika Expansion Tape 600 is used to seal joints between window / door frames and adjacent building components. Seals against wind, dust, spray water and driving rain.
SikaSwell A Profiles are acrylic, swellable joint sealing profiles and rings which swell in contact with water. Used to seal construction joints in watertight concrete construction, pipe and steel work penetrations through walls and floor slabs, etc. Easy to apply, adaptable to fit many different detailing tasks, no welding required, swells in contact...
Remmers Epoxy Crack Fix is a very fast reacting, transparent epoxy resin for fast, frictionally coupled filling of cracks and false joints on cement screeds and concrete. Depending on the crack depth, each pack will yield up to 5 running metres. Cures very quickly, plasticizer-free, good penetration capacity, can be subjected to heavy...
Sika WindowTape One is a multifunctional special tape with outstanding qualifications. The tape is 100% airtight and lowers the loss of convections heat substantially. The Sika WindowTape One has an optimal vapour diffusion gradient from inside to outside which assures an efficient humidity transport towards the cooler side and a fast drying of the joint.
Sika Setting Sand is an easy to use, moisture curing jointing material for all types of paving with a joint width of 2mm and over. ADVANTAGES Sets hard, wont crack or wash out. Resists weeds and insects. Suitable for all types of block paving. Weathers naturally in line with the paving. Can withstand light vehicular traffic
SikaHyflex 250 Facade is a high-performance over paintable 1-part professional weatherproofing sealant for concrete, masonry and EIFS facades. SikaHyflex 250 Facade is a 1-part, moisture curing, and low modulus elastic joint sealant suitable for movement and connection joints in commercial building envelopes.
Sika Boom FR is a one part, high yield, fire-retardant polyurethane foam ideal for sealing pipes penetrating through brickwork and openings in walls, and for insulting between brickwork and cladding, around ducting and through cavities carrying pipes and cables where fire protection is required.
Sikaflex 291i (available as a pack of 12 x 300cc cartridges) is a non-sag 1-part polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture and forms a durable elastomer. Sikaflex 291i meets in addition the low spread of flame requirements set out by the International Maritime Organisation (IMO)....
SikaFuko Eco 1 is an injectable hose system to seal construction joints in watertight structures against water and salt water ingress. It is cast into the construction joints with the concrete. When it is necessary to seal or reseal the construction joints, it can be injected with the most suitable Sika Injection materials based on acrylic and...
Remmers IR Epoxy 360 is a rigid epoxy injection resin used for friction locked bonding and glueing, filling of cracks and void in concrete, glueing of detached concrete and screeds, attaching of tension anchors and grouting of construction joints. Low viscosity, high adhesive power, high adhesion to joint flanks, volume and form-locking,...