Sika InjectoCem 190
Sika InjectoCem 190 is a two part injection grout based on micro cement (d95 < 9.5μm) with added corrosion inhibitors. Used for injection of the Sika Injectoflex System, filling of voids, final rigid cementitious sealing of cracks, encasement of filler joists. It also provides simultaneous corrosion protection of steel reinforcement.
Sika InjectoCem 190 is a two part injection grout based on micro cement (d95 < 9.5 μm) with added corrosion inhibitors.
Sika InjectoCem 190 is used for:
- Injection of the Sika Injectoflex System
- Filling of voids
- Final rigid cementitious sealing of cracks
- Encasement of filler joists
It also provides simultaneous corrosion protection of steel reinforcement.
Features & Benefits
- Structural grouting of cracks
- Corrosion protection of embedded reinforcement
- Deep penetration of narrow cracks in concrete and mortar
- Good flow properties
- No VOC
- Low odour
For more details please download the product data sheet from the 'DATASHEETS' tab above. It is important that the manufacturer is contacted before use of these systems as a site visit/written specification may be required prior to use of these systems to ensure correct installation and suitability for the project in question.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close