A solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater. Top Features Designed for underwater and other wet applications Self-priming on most surfaces and over most generic types of coatings VOC compliant to...
Keim Spachtel is a silicate filler is ready to use and suitable for small crack repair and surface equalisation onto mineral surfaces.
- Purely mineral filler
- Potassium waterglass emulsion
- Interior and exterior use
- Apply with spatula
This product is available as POA. Click here to email us for more information
Keim Spachtel is a silicate filler that is ready to use and suitable for small crack repair and surface equalisation onto mineral surfaces. Specially formulated for application with a filler spatula, can be coated with a coloured Keim mineral paint of choice or optionally with the Keim Universal Render.
Top Features & Benefits
As a masonry filler, Keim Spachtel is ideal for many environments, particularly those that will benefit from the following features:
- Purely mineral filler.
- Potassium waterglass emulsion.
- Reinforced fibre can be embedded as required.
- Interior and exterior use.
Preparation & Application
The substrate must be clean, dry and sound. Loose material should be removed with a wire brush, scraper or water pressure jet.
Keim Spatula is supplied ready to use. Apply in thin layer(s) by trowel. If reinforcement fibre fabric is to be embedded apply a first layer (approx. 2mm thick), press in the fabric and smooth out the excess filler by trowel. Once the first layer has hardened, apply a second layer by trowel. The total layer thickness should not exceed 5mm.
Deeper areas that require filling should be filled first of all up to a maximum of 10mm thickness in total. Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
Clean tools with water immediately after use.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Per 1mm layer thickness approx. 2 kg/m2 or 10kg/m2 for 5mm thick repair
- Touch Dry
- Minimum 1 day. Several days for thick layer in humid weather.
Be the first to ask a question about this product!
Sikaflex 252 (pack of 12x300ml cartridges) is a non-sag, 1 component polyurethane adhesive of stiff, paste-like consistency that cures on exposure to atmospheric humidity to form a durable elastomer. Sikaflex 252 is suitable for use with timber, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics. Non-corrosive, can be...
Sikadur 52 Injection Type N is a two part, solvent-free, low viscosity injection liquid, based on high strength epoxy resin. Type N (= Normal Potlife) is used for substrate temperatures between +5°C and +30°C (UK). Used as an injection resin with good adhesion to concrete, mortar, stone, steel and wood. Suitable for both, dry and damp...
SikaSeal 140 Multi Purpose Silicone is an acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a fungicide to prevent in product mould growth. Certified under the harmonized European standard EN15651 for façade, cold climate and sanitary applications in compliance with the...
SikaProof Primer 01 is solvent-dispersed synthetic rubber and resin based used as a primer for SikaProof waterproofing system to increase the adhesion and bond to the comply substrate. High adhesion and bonding ability on various substrates, good binding ability for dust and loose particles, quick drying time, especially at low temperatures, ready to use...
Sikasil Pool is a one part neutral curing silicone sealant for use in swimming pools and permanently wet areas. It is suitable for joints in and around swimming pools, areas under permanent water immersion and frequently wet areas, such as shower rooms in sports halls or leisure facilities, between ceramics, tiles, concrete, glass, metals and other...
A flexibilised epoxy filler/sealant allowing direct pouring into horizontal joints. Hard and tough enough to protect joint edges from heavy wheel loading, but posesses sufficient flexibility to accomodate 10% movement of the joint width.
Sikaflex PRO-3 SL (available in packs of 20x 600cc sausages) is a one part, moisture curing, self levelling elastic joint sealant with high mechanical resistance for indoor and outdoor floors. Applications include; movement and connection joints in floors, pedestrian and traffic areas (e. g. parking decks, car parks), warehouses and production areas....
SikaSwell A Profiles are acrylic, swellable joint sealing profiles and rings which swell in contact with water. Used to seal construction joints in watertight concrete construction, pipe and steel work penetrations through walls and floor slabs, etc. Easy to apply, adaptable to fit many different detailing tasks, no welding required, swells in contact...
SikaHyflex 250 Facade is a high-performance over paintable 1-part professional weatherproofing sealant for concrete, masonry and EIFS facades. SikaHyflex 250 Facade is a 1-part, moisture curing, and low modulus elastic joint sealant suitable for movement and connection joints in commercial building envelopes.
Sikaflex 521 UV (available as a pack of 12 x 300cc or 20 x 600cc cartridges/sausages) is a one-component PUR-Hybrid sealant based on the Sika Silane Terminated Polymer (STP) technology. The product cures on exposure to atmospheric humidity to form a durable elastomer. Ageing and weathering resistant, it bonds well to a wide variety of substrates. Image...
SikaProof Patch 200 B is a self-adhesive tape, consisting of a SikaProof membrane laminated with a Sikaproof Butyle adhesive that is covered with a release liner. SikaProof Patch 200 B is used for post-sealing of joints, penetrations as well as damages outside on the membrane side of the SikaProof A05/A08/A12 system.
Sika Setting Sand is an easy to use, moisture curing jointing material for all types of paving with a joint width of 2mm and over. ADVANTAGES Sets hard, wont crack or wash out. Resists weeds and insects. Suitable for all types of block paving. Weathers naturally in line with the paving. Can withstand light vehicular traffic
Remmers IR Epoxy 360 is a rigid epoxy injection resin used for friction locked bonding and glueing, filling of cracks and void in concrete, glueing of detached concrete and screeds, attaching of tension anchors and grouting of construction joints. Low viscosity, high adhesive power, high adhesion to joint flanks, volume and form-locking,...