Keim Dolomitspachtel is a mineral paint specialist, that builds upon the work done by craftsman Adolf Wilhelm Keim in the late 19th Century. Keim Dolomitspachtel is a silicate filler ideal for filling-in small cracks on internal mineral-based substrates. Additionally, the filler is suitable for full cover, and therefore a great way to equalise the surface before painting with the colour of choice from any of the Keim Mineral internal paints.
Top Features & Benefits
An ideal filler for internal mineral surfaces, Keim Dolomite Filler boasts the following key features:
Application by hand or machine; Airless sprayer possible.
Preparation & Application
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed. For concrete substrates, a maximum residual moisture content of 3% must not be exceeded.
Keim Dolomite Filler is supplied ready to use. Apply thinly with a float, and do not exceed a maximum layer thickness of 4mm. Deeper cavities must be filled beforehand. Once the first layer of filler has dried, apply a second layer with a float.
Can be over-coated with any Keim mineral interior paint.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
KEI1034
Data sheet
Application
Hand, Machine, Airless Spray
Coverage
Approximately 1.8kg/m2 for surface filling per 1mm layer thickness.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
SikaProof Tape 150 is a self-adhesive tape, consisting of a film with a butyl rubber adhesive that is covered with a release liner, the film is laminated with a sealant and a non-woven fleece. SikaProof Tape 150 is used for joints, connections and details to be adhered on the fleece side (inside) of SikaProof A system.
Features & Benefits...
Sika WindowTape One is a multifunctional special tape with outstanding qualifications.
WindowTape One has an optimal vapour diffusion gradient from inside to outside which assures an efficient humidity transport towards the cooler side and a fast drying of the joint.
Features & Benefits
100% air tightness,
Driving rain tightness...
Sika Expansion Tape 100 is an impregnated sealing tape used to protect from draught and dust as well to reduce heat loss and improve acoustics. It is used to seal joints between window / door frames and adjacent building components.
Features & Benefits
Open Vapour diffusion structure
Permanently elastic
Sound and thermal insulation...
Remmers Betofix HQ2 is a sealing mortar with high early strength that is swellable, water impermeable and resistant to frost and de-icing salt.
For indoor and outdoor use,
Mineral substrates in dry, damp and wet areas,
Packing and mounting mortar for connecting machines,
Iron and concrete structures as well as wood elements.
High early...
Ennis-Flint Pot Hole Repair, an environmentally-friendly thermoplastic repair system that is ideal for repairing cracks, small holes, footways and carriage-ways. Ideal for use on stable roads that have surface defects which require repair to ensure continued safety for road users.
Easy-to-use, temporary crack and small hole repair system...
Sikaflex 512 Caravan (available in packs of 12x 300cc cartridges) is a multi-purpose, non-sag, elastic, one component sealant based on a polyurethane hybrid compound, which cures on exposure to atmospheric humidity to form a durable elastomer.
Suitable substrate materials are timber, metals, metal primers and paint coatings, ceramic...
Sika Concrete Crack Repair is a two part grey epoxy paste, mix in the tube adhesive for high strength repairs to concrete. Can be injected into cracks, can be used on damp concrete, excellent adhesion, economic - only use as much as required, can be applied in vertical and overhead situations, resistant to water, chemicals and solvents....
Sikaflex 11 FC+ (available as a pack of 12 x 300cc or 20 x 600cc cartridges) is a 1-part elastic joint sealant and multipurpose adhesive based on polyurethane that is suitable for indoor and outdoor applications.
Features and benefits:
1-part,ready to use
Flexible and elastic
Solvent free and odorless
Very low emission
Sealant:...
Sikadur 41 CF Rapid is a moisture tolerant, thixotropic, structural three part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +5°C and +20°C.
Features and Benefits
Easy to mix and apply
High layer thickness, up to 60mm in one application
Suitable for dry...
Rust-Oleum 5412 Epoxy Filler is a solvent free, two component epoxy putty for repair of small cracks, air-pockets and/or blow-holes in concrete walls and floors.
Extremely strong: 3x stronger than concrete
Solvent-free and shrink-free
Easy 1:1 mixing ratio
Low odour
For indoor and outdoor use
A solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.
Top Features
Designed for underwater and other wet applications
Self-priming on most surfaces and over most generic types of coatings
VOC compliant to...
Remmers Injection Mortar is a fluid mineral filling and injection mortar for strengthening hollow cavity and loose masonry work according to WTA Code of Practice 4-3-98-D. It is also used for filling joints, especially when replacing stones and filling bore holes after impregnation or injection against rising damp in masonry in the Remmers Kiesol System....
Sika Setting Sand is an easy to use, moisture curing jointing material for all types of paving with a joint width of 2mm and over.
Features and Benefits
Sets hard, wont crack or wash out.
Resists weeds and insects.
Suitable for all types of block paving.
Weathers naturally in line with the paving.
Can withstand light vehicular traffic...
Sikaflex AT Connection (available in packs of 20 x 600cc sausages) is a universal construction sealant for connection joints that is a one part, solvent based, PU hybrid that is UV resistant and permanently elastic.
Features and Benefits:
Movement capability 25% (ISO 9047)
Silicone free and over-paintable
Good weathering and aging...
Sika InjectoCem 190 is a two part injection grout based on micro cement (d95 < 9.5μm) with added corrosion inhibitors. Used for injection of the Sika Injectoflex System, filling of voids, final rigid cementitious sealing of cracks, encasement of filler joists. It also provides simultaneous corrosion protection of steel reinforcement....
SikaFuko VT 2 is an injectable hose system with unique integral ‘valves’ for sealing and possibly resealing construction joints in watertight structures against water and salt water ingress.
Features & Benefits
Uses unique valve techniques for injection
Re-Injectable with cement, Sika acrylic resins and microfine cement suspensions...
