Hempel Epoxy Filler 35250 is a two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons, and related products
Can be applied in thick coats up to approximately 5mm without runs or sags
Use as a filler for metals, hardwood, and other rigid materials, and for filling of pinholes in weldings and similar irregularities in steel work not later exposed to strong chemicals
Colour swatch is a representation and not indicative of the final colour
Hempel Epoxy Filler 35250 is a two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons, and related products.
Features & Benefits
Can be applied in thick coats up to approximately 5 mm without runs or sags
For use as a filler for metals, hardwood, and other rigid materials
For filling of pinholes in weldings and similar irregularities in steel work not later exposed to strong chemicals
Service temperature maximum, dry exposure only: 140°C. In water (no temperature gradient): 35°C
Touch dry in approx. 8 hours, fully cured in 5 day(s) (approx.) 20°C
Apply with putty knife, or similar
Product Details
6068-994725
Data sheet
Manufacturer
Hempel
For Use By
Professional Use
Interior / Exterior Use
Exterior Use
For Use On
Steel
For Use On
Wood
Application Method
Putty knife, or similar
VOC Levels
10 g/l
Mixing Ratio
BASE 35259: CURING AGENT 95250 1 : 1 by volume
Touch Dry (at 20°C)
8 hours approx.
Fully Cured (at 20°C)
5 days approx.
Pot Life (at 20°C)
1 hour
Recommended Thinner/Cleaner
HEMPEL'S TOOL CLEANER 99610
Solids by Volume
100%
Heat Resistance (up-to)
Service temperature maximum, dry exposure only: 140°C. In water (no temperature gradient): 35°C
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Yes, the Hempel Epoxy Filler 35250 can be used on GRP/ Fibreglass.
For preparation it is recommended to use a dry paper grade of around 150-180 or wet paper grade of 180 grit. For further information please review the product data sheet, available on the product page found just beneath the product image within the "DATA SHEETS" tab.
Hempel Epoxy Filler 35250 Light Grey is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products.Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...