Sika Parex E33 Epoxy Grout

    631077
    SIK9570

    E33 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in gaps down to 10mm. The epoxy resin formulation enables E33 Epoxy Grout to be used in the most demanding situations giving exceptional mechanical strength. The volume stable mix design ensures complete fill of the grouted area and contact with the work piece.

    • Three-part formulation gives good chemical resistance to most chemicals
    • Stable to seawater, petroleum products, resists freeze thaw cycles

    For cold weather working Sika Parex E33 Winter Additive will improve low temperature strength development.

    Size
    £413.63(ex. VAT)
    £496.36 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Uses:
      • Machinery base plates
      • Crane rail tracks
      • Bridge Bearings
      • Compressors and pumps
      • Reciprocating machinery
      • High impact loads
    • Good chemical resistance to most chemicals
    • Stable to seawater, petroleum products, resists freeze thaw cycles
    • E33 Epoxy Grout has been tested to the relevant parts of BS 6319



    Preparation


    • Remove laitance and all loose material including dust, oil and grease to achieve a sound substrate
    • Steel surfaces should be free of mill scale and rust
    • Surfaces to be grouted should be free of standing water and in a surface dry condition
    • Formwork must be designed with sufficient hydrostatic head to ensure grout flow into and across the grouting area and should be made grout tight
    • Apply a silicone based release agent to the formwork surfaces which will affect release after grout has hardened. Alternatively use thick polythene sheet firmly fixed to the formwork



    Mixing


    • Mixing of E33 Epoxy Grout should be carried out with full packs only
    • Pour all of the resin and hardener into a clean mixing vessel
    • Mix with a slow speed drill (200-300rpm) and Mortar Stirrer (MR4) until homogeneous
    • Slowly add the filler to the mixed resin and hardener. When all the filler has been added, mix for a further two minutes until an even colour is achieved
    • Try and ensure that air entrainment is kept to a minimum by keeping the mixing head below the surface level of the grout at all times
    • Larger volumes may be mixed using a forced action mixer such as the Creteangle or the Pennine
    • Each pack will yield approximately 14.75 litres of mixed material



    Placing


    • Allow mixed grout to stand for 5 minutes prior to placing to allow entrained air from mixing to be released
    • Place grout continuously into the work area from one side only. Where further mixes are required to fill the void, these should be prepared in sequence such that pouring is continuous
    • Place mixed grout within 30 minutes after start of mixing
    • Place in gap widths between 10mm and 50mm
    • For thicker sections use E70 or E140 variants
    • Do not disturb the grouted section until the grout has hardened
    • Tools and mixing equipment should be cleaned with Solvent before grout has hardened. Set grout can only be removed mechanically
    • May be placed at temperatures between 5°C and 45°C
    • No special curing is required



    Product Details
    9570-965075

    Data sheet

    Manufacturer
    Sika
    For Use By
    Professional Use
    Interior / Exterior Use
    Exterior Use
    For Use On
    Mortar
    Concrete
    Single, Two or Three Pack
    Three-Pack
    Pack Size
    28.575KG
    Compressive Strength (at 20°C)
    1 day: 63N/mm²
    3 days: 81N/mm²
    7 days: 85N/mm²
    Tensile Strength
    16N/mm² @ 7 Days
    Flexural Strength (at 20°C)
    29N/mm² @ 7 Days
    Max. Application Temperature
    45°C
    Min. Application Temperature
    5°C
    Density
    1950kg/m3
    Shelf Life (from date of manufacture)
    12 months
    UN Number
    UN3082 (A)
    UN2735 (B)
    Pot Life
    30 minutes
    Flammability
    Non-flammable
    Base Type
    Solvent-Based
    Manufacturer
    Sika
    Components
    1K
    Usages
    Concrete Repair
    Product Usage Type
    Resin Grout
    Product Range
    Parex
    Categorised As
    Repairs > Low Temperature Grouts
    Seasonal
    Cold Weather
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Sika Parex E33 Epoxy Grout is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Sika Parex E33 Winter Additive

    1-component additive for use with E20, E33, E70 and E140 Sika Parex Epoxy Grouts in cold temperatures (>+5°C) for improved strength development. Please Note: This product is made to order subject to a lead time of 28 Working Days. More Information Delivery Info

    Price £32.96 (ex. VAT)
    In Stock and Available for Delivery