Rust-Oleum Pegacrete
  • Rust-Oleum Pegacrete

Rust-Oleum Pegacrete

168.1.5P

Rust-Oleum Pegacrete is a quick hardening, powdered repair product based on cement base and resins for indoor and outdoor works. It should be used for levelling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork. 100% shrink resistant, good mechanical strength, easy to apply - just add water.

  • Quick hardening
  • Good mechanical strength
  • 100% shrink-resistant
  • Stronger than concrete
  • Easy to apply, just add water
  • Can be overcoated with any Rust-Oleum or Mathys coating once cured
Colour
Size
£13.71
VAT excluded

£16.45 Tax incl.
Quantity

Description

Rust-Oleum Pegacrete

Rust-Oleum Pegacrete is a powdered repair product based on cement base and resins for indoor and outdoor works. Rust-Oleum Pegacrete should be used for levelling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork.

Features & Benefits

  • Quick hardening
  • Good mechanical strength
  • 100% shrink-resistant
  • Stronger than concrete
  • Easy to apply, just add water
  • Can be overcoated with any Rust-Oleum or Mathys coating once cured

Surface Preparation

  • On bare substrate: clean with steel brush or sand blaster. The substrate must be solid and free from dust, oil and grease. Porous substrates must be moistened first. Metal parts are to be treated with Rust-Oleum Mathys Noxyde 10 English Red.

Application

  • Tools: Filling blade or trowel.
  • Cleanup: Water.

Technical Data

  • Density: 1,6
  • Compressive Strength: 38 MN/m²
  • Mixing Ratio: Pegacrete : Water = 5kg : 1L

Application Conditions

  • Apply at a temperature of min. 5°C.

Remarks

  • Do not use more water than necessary for the application (approx. 0.9 litres water to 5kg of Rust-Oleum Pegacrete).
  • Add Rust-Oleum Pegacrete progressively to water and mix steadily.
  • Pegacrete must be applied with a coat thicknesses of 5-20mm. For thicker coats (20mm and more) it is preferable to add some sand to the mortar in the following proportion: for 1 litre of mortar, 0.3-0.5 litre of sand 0-4mm.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
168.1.5P

Data sheet

Dry to Recoat (at 20°C)
2 Days
Fully Cured (at 20°C)
1 Months
Coverage
1.6kg per m² @ 10mm thick
Compressive Strength (at 20°C)
38 MN/m²
Density
1,6
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Holly Crawford on 12/06/2017
Question: Can you paint over this and if so which paint? Thanks
Answer: 

Rust-Oleum Pegacrete can be re-coated with all paint types.


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum Mathys Noxyde

Rust-Oleum Mathys Noxyde is a single pack, water-based elastomeric coating with unequaled corrosion protection designed for spraying, offering 15 years of protection with excellent waterproofing and elasticity. Features and Benefits Unrivalled corrosion protection and waterproofing Approved for corrosion class C5-M high (ISO 12944)...

Price £43.08
In stock
16 other products in the same category:

202 Vertical Surface Repair Mortar

202 Vertical Surface Repair Mortar is a fast setting epoxy repair mortar for vertical and overhead repairs providing a strong and durable, weatherproof repair for concrete, brickwork, stonework and steel substrates. Ideal for repairs to spalled or damaged concrete structures and cosmetic refurbishment of old stone and brickwork.

Price £38.27
In stock

Sika Repair EP

Sika Repair EP is a thixotropic, 2-component repair mortar, based on a combination of epoxy resins with refined quartz fillers. Used as repair mortar for concrete, cement mortar and stone, filling holes and damaged corners, edges and joint sides in concrete, rigid interpretation of broad, non-moving joints, filling and sealing of cracks (no...

Price £59.55
In stock

710 MMA Repair Mortar

A fast curing, high strength, trowel applied, MMA resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.

Price £61.24
In stock

Sika Ebonex System

Sika Ebonex is a discrete impressed current cathodic protection anode, specifically designed to protect reinforced concrete structures and steel framed buildings. Features and Benefits  Embedded Installation - provides discrete installation, with no added dead weight loading or increase to physical dimensions of the structure. Gas Venting...

Price £35.00
In stock

Sika 4a Water Stop

Sika 4a Water Stop is a ready to use quick setting leak stopping liquid which is mixed with water and ordinary Portland cement to produce a paste for leak stopping against high water pressure infiltration. Features and Benefits  Ready to use Rapid setting time Just add water and ordinary portland cement Well proven Does not contain...

Price £58.97
In stock

Sika MonoTop 109 WaterProofing Mortar

Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in...

Price £15.90
In stock

Remmers Betofix R4

Remmers Betofix R4 is a fibre reinforced PCC dry mortar for the repair of concrete elements with rough surfaces in areas with static and dynamic load. Combines corrosion protection, bonding layer, coarse and fine mortar in one product, A4 mortar according to RL-SIB and class R4 according to DIN EN 1504-3. Image already added

Price £59.49
In stock

Remmers Betofix R4 SR

Remmers Betofix R4 SR is a fibre-reinforced PCC/SPCC for the static repair of concrete structures in areas under high chemical loads (up to and including exposure class XA 3). Combines corrosion protection, a bonding layer and coarse and fine mortar, Certified in accordance with DIN EN 1504-3, Can be sprayed and applied by hand. Image already added

Price £59.49
In stock

Remmers Crete WR

Remmers Crete WR is a trowel applied coving and wall render based upon a polyurethane resin system. Designed specifically for use with Remmers polyurethane flooring in order to maintain the same standards of resistance to abrasion and chemical contact. Remmers Crete WR is used to form chemically resistant covings, fillets, gulleys, wall...

Price £42.57
In stock

Sikadur 41 CF Normal

Sikadur 41 CF Normal is a thixotropic, three part patching and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.  Ideal for use with: concrete elements, hard natural stone, ceramics, fiber cement, mortar, bricks, masonry, steel, iron, aluminium, wood,...

Price £74.29
In stock

Remmers Betofix HQ3

Remmers Betofix HQ3 is a cement-bound, chloride-free, factory-mixed, dry mortar that is ready to use after mixing with water. It can be produced with all conventional positive mixers. The grout material achieves very high early and ultimate strength in connection with very good flow and pumping properties.  Image already added

Price £37.50
In stock

Remmers Betofix RM

Remmers Betofix RM is a fast repair mortar which provides fast concrete repairs in facade areas that are not statically or dynamically stressed. Remmers Betofix RM is used for closing broken out areas, gravel pockets, pores, uneven surfaces, spacers and holes. As well as filling of concrete surfaces and as mineral corrosion protection for reinforcement...

Price £59.49
In stock

Sika Margel VPI 580

Sika Margel VPI 580 is a patented vapour phase corrosion inhibitor which is inserted inside concrete structural elements close to the reinforcing steel. The product has been specifically developed to ensure the corrosion inhibitors are released over a period of 12- 48 months. Features and Benefits  Proven technology – 25 year track record....

Price £598.50
In stock

Remmers Betofix Filler

Remmers Betofix Filler is a PCC fine filler for structural repair of concrete structures. A single component, polymer modified finer filler (PCC system) with hydraulic binders, mineral aggregates and special additives. Remmers Betofix Filler is a factory mixed, mineral, dry mortar that is ready to use after mixing with water.  Image already...

Price £50.20
In stock

Rust-Oleum Speed Patch Pourable Grade

Rust-Oleum Speed Patch Pourable Grade is a quick setting, pourable repair mortar that is ideal for patch repairs for heavily trafficked floors. Accepts heavy traffic 2 hours after application Easy to prepare: add water and mix Possible to apply on slightly wet concrete Sets at low temperatures (5°C) For deep or shallow repairs

Price £80.06
In stock

Sika MonoTop 615

Sika MonoTop 615 is an R3 cementitious high build concrete repair mortar. Sika MonoTop 615 is a one component cement based polymer modified high build repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN 1504-3. Features and Benefits: Pre-bagged for quality Just add water Sprayable by the wet spray method...

Price £52.15
In stock