Sika MonoTop 612
Sika MonoTop 612 is an R4 hand placed/wet spray repair microconcrete. Sika MonoTop 612 is a cement-based, one component low permeability repair microconcrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3..
Sika MonoTop 612 is a cement-based, one component low permeability repair microconcrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3.
- For repairing all types of structures
- Horizontal, vertical and overhead repairs
- Hand applied repairs
- Spray applied repairs
- For exterior and interior use
- In place of R1, R2 & R3 mortars
Features and benefits:
- Pre bagged for quality
- Compatible with Sika FerroGard corrosion inhibitors
- Easy to mix and apply
- Low shrinkage
- Good mechanical properties
- Adjustable consistency
- Suitable for drinking water contact
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||2.11kg per m²|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close