SikaCem 133F Gunite
SikaCem 133F Gunite is a dry sprayed fibre reinforced micro repair concrete. SikaCem 133F Gunite is a one component dry sprayed fibre reinforced micro-repair concrete with non-reactive aggregates.
SikaCem 133F Gunite is a cement based, polymer modified one component repair mortar containing silica fume and high range water-reducing agents, with fibre enhancement for shrinkage cracking reduction. Formulated for machine applications using the dry process without set accelerators, repairs may be profiled and trowel finished where necessary.
- Large volume repairs
- Marine structures
- For exterior and interior use
- Enhancing Concrete Cover
Features and benefits:
- One component, ready to use micro concrete
- Non silica aggregates
- Low rebound losses and dust formation during the spraying process
- Layer thicknesses in one application overhead up to 150mm are possible without any additional mesh reinforcement
- Rapid strength gain without set accelerators
- Very low shrinkage
- Overcoatable with Sika reprofiling/levelling mortars and coatings
- Fibre Technology reduces shrinkage cracking
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close