Sika AnchorFix 1 is a fast curing, solvent and styrene free, two part polyester anchoring adhesive. Intended for use as a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel, threaded rods, bolts and special fastening systems, concrete, hollow and solid masonry, hard natural stone and solid rock.
Sika AnchorFix 1 is a fast curing, solvent and styrene free, two part polyester anchoring adhesive. Intended for use as a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel, threaded rods, bolts and special fastening systems, concrete, hollow and solid masonry, hard natural stone and solid rock.
Prior to any application, the suitability of the Sika AnchorFix 1 Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity.
Features & Benefits:
Fast curing
Standard guns can be used
Can be used at low temperatures
High load capacity
ETA Approval available
Non-sag, even overhead
Styrene-free
Low odour
Low wastage
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Product Details
1793-189308
Data sheet
Manufacturer
Sika
For Use On
Steel Rebar Concrete Masonry Stone Rock Bolts Threaded Rods
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Sika AnchorFix 1 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A range of accessories to be used with Sika AnchorFix 1 fast curing anchoring adhesive. The range includes; Sika AnchorFix Mixer Nozzles, Sika AnchorFix Brushes, Sika AnchorFix Blow Out Pump, Sika AnchorFix Sleeves and Sika AnchorFix Extension Tube.
More Information Delivery Info
Sika Applications Guns are used to apply Sika sealants and foam precisely and professionally.
Designed to suit varying sizes of cartridge
Range of application guns to achieve the best from your Sika application
3 options available
More Information Delivery Info
Sika AnchorFix 2+ is a two part anchoring adhesive for medium to high loads.
For professional use
Solvent and styrene free.
Epoxy acrylate based.
2-component
For normal/moderate climate conditions.
Fast curing.
Standard guns can be used.
High load capacity.
Suitable for cracked concrete.
More Information Delivery Info