International Intergard 821
  • International Intergard 821

International Intergard 821

EAA820/EAA821

International Intergard 821 is a two component solvent free epoxy filler, which is easily mixed and applied by knife or trowel. Intended as a filler for correctly prepared, corroded and pitted steel prior to coating maintenance.

Colour
Size
Finish
£99.39
VAT excluded

£119.27 Tax incl.
Quantity

Description

International Intergard 821 is a two component solvent free epoxy filler, which is easily mixed and applied by knife or trowel. Intended as a filler for correctly prepared, corroded and pitted steel prior to coating maintenance. International Intergard 821 is recommended for application to surrounding area of impressed current anodes to resist voltage and attack by alkali.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
EAA820/EAA821

Data sheet

Typical Coverage (per coat)
0.05m²/litre at 20,000 microns d.f.t.
Touch Dry
6 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Sika Galvashield Embedding Mortar

Sika Galvashield Embedding Mortar is a controlled resistivity mortar for use with Sika Galvashield discrete corrosion protection anodes. The mortar is designed to provide a low resistance environment around the anode and improved performance.

Price £129.99
In stock

Sika Accelerator

Sika Accelerator is a chloride free liquid admixture for set acceleration and rapid hardening of cement based mortar, concrete, screeding and render. Also provides frost protection in the wet mortar during the setting period; even in sub-zero temperatures (down to –8°C). May also be used neat with cement as a plugging aid. Non-corrosive to metals so may...

Price £23.87
In stock

Coo-Var Floorpack Concrete Repair Mortar

Coo-Var Floorpack Concrete Repair Mortar is a solvent free, two component, heavy duty epoxy mortar for repairing concrete. ADVANTAGES Impact/abrasion resistance Chemical resistance Low temperature curing Can cure in the damp Smooth finish Includes gloves

Price £35.62
In stock

Remmers Betofix R4

Remmers Betofix R4 is a fibre reinforced PCC dry mortar for the repair of concrete elements with rough surfaces in areas with static and dynamic load. Combines corrosion protection, bonding layer, coarse and fine mortar in one product, A4 mortar according to RL-SIB and class R4 according to DIN EN 1504-3. Image already added

Price £59.49
In stock

Remmers Betofix RM

Remmers Betofix RM is a fast repair mortar which provides fast concrete repairs in facade areas that are not statically or dynamically stressed. Remmers Betofix RM is used for closing broken out areas, gravel pockets, pores, uneven surfaces, spacers and holes. As well as filling of concrete surfaces and as mineral corrosion protection for reinforcement...

Price £59.49
In stock

Rust-Oleum 5410 Asphalt Repair

Rust-Oleum Asphalt Repair is a durable bitumen-based patch repair material for use on exterior pot-holed asphalt and concrete: Ideal for potholes in roads, car parks, paths and other concrete surfaces Simple to use - no mixing required  Repairs can be driven over immediately after application  For repairs 25mm – 100mm Withstands heavy...

Price £55.49
In stock

Rust-Oleum 5180 Epoxy Repair Mortar

Rust-Oleum 5180 Epoxy Repair Mortar is an incredibly tough, 2 component epoxy resin mortar for repairing damaged, dished or dangerous concrete and stone floors. ADVANTAGES Virtually indestructable Heavy traffic friendly Chemical resistant Does not shrink or crack Easy all-in-one packaging Interior/Exterior use No primer required in...

Price £16.34
In stock

Sika 4 Rapid Setting

Sika 4 Rapid Setting is a ready to use quick setting leak stopping liquid for use against low water pressure infiltration. It is used to aid the quick setting of cement based renders and concretes where low water pressure or slow moving water exists.

Price £68.65
In stock

Remmers Betofix HQ3

Remmers Betofix HQ3 is a cement-bound, chloride-free, factory-mixed, dry mortar that is ready to use after mixing with water. It can be produced with all conventional positive mixers. The grout material achieves very high early and ultimate strength in connection with very good flow and pumping properties.  Image already added

Price £37.50
In stock

Remmers Epoxy Quick Fix

Remmers Epoxy Quick Fix is an epoxy resin mortar for universal use, e.g. for repairing missing areas, producing sealing coves, ramps, slopes, etc. All of the components in the system (mortar, primer and filler) are found in the bucket. Foot traffic after 2 hours. For filling and repairing missing and broken out areas, bedding anchors and...

Price £78.75
In stock

Rust-Oleum Pegacrete

Rust-Oleum Pegacrete is a quick hardening, powdered repair product based on cement base and resins for indoor and outdoor works. Rust-Oleum Pegacrete should be used for levelling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork. 100% shrink resistant, good mechanical strength, easy to apply - just add...

Price £13.71
In stock

Sika Margel VPI 580

Sika Margel VPI 580 is a patented vapour phase corrosion inhibitor which is inserted inside concrete structural elements close to the reinforcing steel. The product has been specifically developed to ensure the corrosion inhibitors are released over a period of 12- 48 months.

Price £598.50
In stock

Sika Galvashield CC Galvanic Anodes

Sika Galvashield CC embedded galvanic anodes are used to control ongoing corrosion and to prevent the new formation of corrosion sites on reinforced concrete structures. The specially formulated precast cementitious mortar surrounds and activates the sacrificial zinc core. The cylinders are available in a variety of sizes and are quickly and easily...

Price £670.00
In stock

Rust-Oleum 5150 Speed Patch

Fast setting, high strength concrete repair mortar provides a durable fast setting repair to frost spalled, eroded and cracked concrete, steps, troughs, ramps, coving etc.

Price £40.49
In stock

Sika X-Plug (XP004)

Sika X-Plug is a mechanical plug specifically designed to seal the void formed in a concrete wall by the removal of a tie bar. To fit tie bar size: 19.05mm – 25.04mm (¾ inch to 1 inch diameter) 11mm (7/16 inch) fixing nut. Quick and easy to install, secure mechanical plug, highly chemical resistant, can be installed from either side of tie bar hole, no...

Price £824.67
In stock