Sika Accelerator

Manufacturer:

Sika Accelerator is a chloride free liquid admixture for set acceleration and rapid hardening of cement based mortar, concrete, screeding and render. Also provides frost protection in the wet mortar during the setting period; even in sub-zero temperatures (down to –8°C). May also be used neat with cement as a plugging aid. Non-corrosive to metals so may be used with brick ties.

Bulk Buy

£23.87 tax excl.

£28.64   tax incl.

Product Description

Sika Accelerator is a chloride free liquid admixture for set acceleration and rapid hardening of cement based mortar, concrete, screeding and render. Also provides frost protection in the wet mortar during the setting period; even in sub-zero temperatures (down to –8°C). May also be used neat with cement as a plugging aid. Sika Accelerator is non-corrosive to metals so may be used with brick ties. Conforms to EN934-2 Table 7.

Benefits

  • Faster finishing times even in cold weather.
  • Provides frost protection down to -8°C in wet mortar.
  • Chloride free non corrosive formula.
  • Optimises mould usage.

Areas For Use

  • Mortars
  • Floor screeds
  • External/Internal cement based rendering
  • Concrete (not structural)
  • Suitable for use as an emergency repair plugging aid when mixed neat with cement.

Limitations

  • Do not overdose.
  • Do not use weak mixes during cold weather.
  • Do not mix with other additives in same gauging water.
  • Dispose of this product and packaging correctly. Do not allow to enter watercourses.
  • It is the user’s responsibility to determine suitability for use. If in doubt, please contact Technical Services Department for further advice.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable