- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Remmers Betofix R4 SR
1084
Remmers Betofix R4 SR is a fibre-reinforced PCC/SPCC for the static repair of concrete structures in areas under high chemical loads (up to and including exposure class XA 3).
- Combines corrosion protection, a bonding layer and coarse and fine mortar
- Certified in accordance with DIN EN 1504-3
- Can be sprayed and applied by hand Supporting walls, facades, slabs and balconies
- Underneath carriageway surfacing on bridges and multi-storey car parks
- Inside and outside old and new buildings and in the wet areas of these buildings
**Available for delivery - see Delivery Options below**
Description
Remmers Betofix R4 SR is a fibre-reinforced PCC/SPCC for the static repair of concrete structures.
Range of Use
- Concrete structures in areas under high chemical loads (up to and including exposure class XA 3)
- Repairing concrete structures with rough surfaces in areas subjected to static and dynamic loads
- In sewage systems exposed to high level of chemical attack, such as settling tanks, sludge thickeners and intakes
- In drinking water systems, meets the requirements in accordance with the work sheets W 270, W 300 and W 347 of the German Technical and Scientific Association for Gas and Water (DVGW)
- Supporting walls, facades, slabs and balconies
- Underneath carriageway surfacing on bridges and multi-storey car parks
- Inside and outside old and new buildings and in the wet areas of these buildings
Features & Benefits
- Combines corrosion protection, a bonding layer and coarse and fine mortar
- Certified in accordance with DIN EN 1504-3
- Can be sprayed and applied by hand
- High sulphate resistance and low active alkali content (SR/NA)
- Single-layered application thickness in cracks up to 80 mm
- Resistant to frost and de-icing salt
Product Details
1084
Data sheet
- Manufacturer
- Remmers
- Interior / Exterior Use
- Interior and Exterior
- For Use On
- Concrete
- Application Method
- Brush, Trowel
- Single, Two or Three Pack
- Single
- Product Certifications
- Test report M 1105/1 Suitability test R2 according to EN 1504-3, Classification report for reaction to fire according to DIN EN 13501-1
- Pack Size
- 25KG
- Pot Life (at 20°C)
- 60 mins
- Coverage
- Approx. 2.0 kg/m²/mm of layer thickness
- Recommended Thinner/Cleaner
- Water
- Max. Application Temperature
- 30 °C
- Min. Application Temperature
- 5 °C
- Shelf Life (from date of manufacture)
- 9 months
- UN Number
- N/A
Be the first to ask a question about this product!