Sikadur Epoxy Repair Kit is a quick setting, two-part epoxy mortar which can effect overnight repairs to concrete. Ideally intended for horizontal surfaces. ADVANTAGES Suitable for interior and exterior use Can be trowelled to a featheredge Abrasion, chemical and solvent resistant Just add water Rapid setting Can be overcoated...
Remmers Sealing Cove Filler Rapid
Remmers Sealing Cove Filler Rapid is a high quality, fast-setting, mineral, factory-mixed, dry mortar based on the latest technology. It is very easy to apply, even on substrates with different absorption behaviour (sand-lime brick, brick, concrete), very smooth and stable even in thicker layers.
Remmers Sealing Cove Filler Rapid is a high quality, fast-setting, mineral, factory-mixed, dry mortar based on the latest technology. It is very easy to apply, also on substrates with different absorption behaviour (sand-lime brick, brick, concrete), very smooth and stable even in thicker layers.
Features & Benefits
- For levelling waterproofing and repairs (e.g. joints, holes, broken out areas) in one working operation
- Sets crack-free
- Adheres extremely well to the substrate and to the following layers
- Render can be applied after 2-3 hours
- Resistant to water and frost
- Highly sulphate resistant
Range of Use
- For watertight repairs of broken out areas, indentations, missing areas, holes and pipes on mineral substrates
- Under Remmers grout systems when waterproofing new buildings and refurbishing old buildings
- For levelling deeper lying joints and rough surfaces in masonry work
- For the production of sealing coves in floor/wall transition areas under Remmers bitumen and grout systems
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sika AnchorFix 1 is a fast curing, solvent and styrene free, two part polyester anchoring adhesive. Intended for use as a fast curing anchoring adhesive for all grades of: Rebars / reinforcing steel, threaded rods, bolts and special fastening systems, concrete, hollow and solid masonry, hard natural stone and solid rock.
Remmers Betofix HQ2 is a sealing mortar with high early strength that is swellable, water impermeable and resistant to frost and deicing salt. For indoor and outdoor use, mineral substrates in dry, damp and wet areas, packing and mounting mortar for connecting machines, iron and concrete structures as well as wood elements. Image already added
Remmers Epoxy Quick Fix is an epoxy resin mortar for universal use, e.g. for repairing missing areas, producing sealing coves, ramps, slopes, etc. All of the components in the system (mortar, primer and filler) are found in the bucket. Foot traffic after 2 hours. For filling and repairing missing and broken out areas, bedding anchors and...
Sika 4 Rapid Setting is a ready to use quick setting leak stopping liquid for use against low water pressure infiltration. It is used to aid the quick setting of cement based renders and concretes where low water pressure or slow moving water exists.
Sikafloor 91 is a coloured three component solvent free epoxy resin based mortar for patching and screeding industrial floors subject to heavy traffic. Ideal for warehouses, workshops, chemical plants, breweries, pharmaceutical plants and more.
SikaGrout 3200 is a fast hardening, high early strength, high final strength, 1-component, shrinkage compensated, free flowing cementitious grout for structural filling of joints and under grouting base plates. High performance precision grouting of vertical or horizontal joints for onshore steel and pre-cast concrete wind towers.
Sika 2 Water Plug is a rapid setting, leak stopping solution that is ready to use even on high waterpressure areas. It can be used to seal against high water pressure infiltrations and allows Sika 1 Waterproofing Renders, SikaCem 133 Gunite or Shotcrete to be applied on structures exposed to running surface water.
SikaCem 133S Gunite (formerly SikaCem 133 Gunite) is a cement based, polymer modified one component repair mortar containing silica fume and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Formulated for machine applications using the dry process without set accelerators, repairs may be profiled and trowel finished...
Remmers Repair Mortar LW EP 2K is a two-component, light-weight mortar for concrete repairs. It is especially for the repair of filigree building elements that have been damaged by steel corrosion. Image already added
Sika Mix&Go Multi-Purpose Mortar is a very easy to use, one part cement based repair mortar in a special mix-in-the-bag pack for speed and convenience. Ideal for steps, stairs, paths and drives, balconies and window sills, posts, gutters and gullies, walls and paving. Mix in the bag, application tool included, just add water!
Coo-Var Floorpack Concrete Repair Mortar is a solvent free, two component, heavy duty epoxy mortar for repairing concrete. ADVANTAGES Impact/abrasion resistance Chemical resistance Low temperature curing Can cure in the damp Smooth finish Includes gloves
SikaMix Plus is an air entraining liquid plasticizing admixture designed specifically to cope with the different qualities of sand, cement and water found in South Wales and the West Country. SikaMix Plus is a liquid ultra stable ‘micro’ air entraining mortar plasticiser designed to enhance the workability and freeze thaw resistance of brick and block...
SikaCem 133F Gunite is a dry sprayed fibre reinforced micro repair concrete. SikaCem 133F Gunite is a one component dry sprayed fibre reinforced micro-repair concrete with non-reactive aggregates.