Rust-Oleum 5410 Asphalt Repair is a durable bitumen-based patch repair material for use on exterior pot-holed asphalt and concrete. Rust-Oleum 5410 Asphalt Repair is based on polished aggregate together with liquid binder based on bitumen plus resins and adhesives.
5410 Asphalt Repair compacts to a dense hard surface that will resist heavy road traffic, repairs can be driven over immediately and it is very simple to use with no hacking necessary. Suitable for holes between 25 and 100mm deep, a simple to use primer is included in the packaging.
This product is ideal for pot-holes in roadways, vehicle parks, loading docks, paths, airfields etc, on bituminous and concrete surfaces.
Features & Benefits
Simple to use - no mixing required
Repairs can be driven over immediately after application
Ideal for repairs 25mm – 100mm
Coverage approx. 0.5m² per 25kg at 24mm thick
Withstands heavy traffic
Primer is included in the packaging
Drying Times At 20°C/RH 50%
Dry to handle: The reparation can be exposed (used) immediately between 25 and 100 mm
Theoretical Consumption
At a film thickness of 24 mm 25 kg will cover approximately 0.5m². The product can be applied up to 100mm film thickness.
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Application Conditions
Temperature of air, substrate and coating material between 5 and 25°C. At lower temperatures the product will be tougher and is therefore more difficult to apply. Do not dilute the product.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
607-940327
Data sheet
Manufacturer
Rust-Oleum
For Use By
Industrial Use
For Use By
Professional Use
For Use By
General Use
Interior / Exterior Use
Exterior
Interior / Exterior Use
Exterior
Water / Solvent Based
Solvent
For Use On
Asphalt, Concrete
Application Method
Rake, Trowel
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Single, Two or Three Pack
Single
Pack Size
25KG
Dry to Handle (at 20°C)
The reparation can be exposed (used) immediately between 25 and 100 mm
Coverage
0.5m² per 25kg at 24mm thick
Max. Application Temperature
25°C
Min. Application Temperature
5°C
Shelf Life (from date of manufacture)
1 year from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 25°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Can this product be laid on a wet surface (in the rain)?
Answer from Rawlins’ Technical Team:
Surfaces do not need to be completely dry when applying Rust-Oleum 5410 Asphalt Repair as it can be used on slightly damp surfaces due to the primer it is supplied with being tolerable to moisture but it won't tolerate 'wet' surfaces and application certainly isn't recommended during rain.
Repair Materials Application Kit provides everything you need to apply our repair products to floors, walls and other surfaces. It makes on site application much easier by providing everything you need to mix, prepare, apply and clean up in one handy kit.
Each Kit Contains:
4 Rubble Sacks for Waste
750ml White Spirit
10" Steel Float
6"...
david mcgorie on 2017-06-01 10:27:28