- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Rust-Oleum 5150 Speed Patch
5150.10
Rust-Oleum 5150 Speed Patch is a fast setting, high strength concrete repair mortar provides a durable fast setting repair to frost spalled, eroded and cracked concrete, steps, troughs, ramps, coving etc.
- Strong and quick repair of concrete
- Can be recoated within hours
- Does not shrink or crack
- Can be drilled after curing
- Easy all-in-1 packaging, including primer
Description
Rust-Oleum 5150 Speed Patch
Fast setting, high strength concrete repair mortar provides a durable fast setting repair to frost spalled, eroded and cracked concrete, steps, troughs, ramps, coving etc.
- Cures as hard as granite
- Can be overcoated quickly
- Ideal for use indoors or out
- Easy all-in-1 packaging
- Can be drilled after curing
Shake the primer bottle(s) before use. The surface should be primed by brush. The liquid in the larger bottles (clear and pigmented) should be mixed with the dry filler to achieve a fairly dry trowelable mixture. It's considerably stiffer and drier than conventional sand and cement and requires compression with a trowel to work it into the repair. That makes the surface wetter which makes finishing easier.
Technical Data
- Density: 2,36
- Compressive Strength: 42 MN/m²
Drying Time At 20°C/RH 50%
- Dry to recoat: 1 hour
- Fully cured: 1 hour
- Pot Life: 10 minutes
Theoretical Consumption
0,5 m² per 10 kg at a depth of 10 mm.
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
5150.10
Data sheet
- Interior / Exterior Use
- Interior and Exterior
- For Use On
- Concrete
- Application Method
- Rake, Trowel
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 10KG, 20KG
- Fully Cured (at 20°C)
- 1 Hour
- Coverage
- 0.5m² per 10KG
- Recommended Thinner/Cleaner
- Rust-Oleum Thinner 160
- Compressive Strength (at 20°C)
- 42 MN/m²
- Max. Application Temperature
- 30°C
- Min. Application Temperature
- 5°C
- Density
- 2,36
- Shelf Life (from date of manufacture)
- 1 year from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
- Touch Dry
- 1 Hour
- UN Number (Activator)
- Not regulated
- UN Number (Base)
- Not regulated
 Peter on 2018-07-19 12:33:01 | Question: Hi, I,m looking to repair a concrete ramp which has the top 10-20mm crumbling in places, I need to skim to a depth of say 20mm. I will also need to re-enforce the area below 3 security bollards and drill new holes to refix the bollards. The ramp is used by a pallet truck (which is what caused the problem!) Please advise? Thankyou |
Answer: Rust-Oleum 5150 Speed Patch would be suitable for all the applications you have explained. | |
| P McGrath on 2016-08-29 11:56:41 | Question: I need product to repair areas of badly crumbled, holed concrete on a yard. total area approx 6sm. is this product seitable |
Answer: Yes this would be ideal. Prime the surface by brush (included in pack). Apply the mixed Speed Patch using compression with a trowel to work it into the repair area. Further compression causes the surface to become wetter which makes finishing easier. The mixed components will remain usable for 10-15 minutes according to temperature and volume of material. | |