Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces.
Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces. Designed for application on concrete and masonry Rust-Oleum 5401 Epoxy Impregnation Primer is primarily intended for roller and brush application. It provides a good key for adhesion on porous, mineral substrates prior to the application of several Rust-Oleum systems like; 9100, 9200, 9600, 5500, Pegakote, 9400 and can also be used as a tack-coat for Rust-Oleum 5180 Epoxy Repair Mortar.
Features & Benefits
NEW: Now also available in convenient 1 litre packaging, ideal for smaller projects the new convenient 2-component packaging provides the base and activator in one convenient kit and the activator is supplied with a user-friendly spout cap.
TECHNICAL DATA
| Density: | 1.07 kg/l |
| Gloss Level: | Gloss |
| Solids Content in Volume: | 100% |
| Solids Content in Weight@ | 100% |
| Heat Resistance: | 100°C (dry heat) - 50°C (wet heat) |
| Compressive Strength: | 50 MN/m² |
| Tensile Strength: | 10 MN/m² |
| Flexural Strength: | 70 MN/m² |
| Mixing Ratio: | Activator = 3 : 2 (Volume) |
DRYING TIMES AT 20°C/RH 50%
| Touch Dry: | 16 h (20°C), 36 h (10°C), 12 h (30°C) |
| Dry to handle: | 16 h (20°C), 36 h (10°C), 12 h (30°C) |
| Dry to Recoat: | 16 h (20°C), 36 h (10°C), 12 h (30°C) |
| Fully Cured: | 7 d (20°C), 14 d (10°C), 5 d (30°C) |
| Pot Life: | 30 min |
| Induction Timer: | 10 min |
SURFACE PREPARATION
New concrete should cure and dry for at least 30 days prior to the application of the product. Remove oil, grease and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Remove all laitance, loose or unsound concrete by vacuum-blasting or etching with Rust-Oleum Mathys 108 Surfa Etch Solution. Remove concrete curing compounds completely. Large surfaces should preferably be prepared by abrasive blasting (vacuum blasting) or flame cleaning. Profile maximum 0.5mm. Defects in the concrete should be repaired with Rust-Oleum 5180 Epoxy Repair Mortar. Small (hair) cracks and air-pockets should be repaired with Rust-Oleum 5412 Epoxy Filler. The surface should be clean and dry during application.
DIRECTIONS FOR USE
Stir individual components thoroughly before mixing them together. Use a low speed mixer in combination with the boxing method.
APPLICATION CONDITIONS
Temperature of air and substrate between 10 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
APPLICATION & THINNING: BRUSH
Use natural bristles, longhair brushes.
Thinning: Absorbent mineral substrates like concrete:
APPLICATION & THINNING: ROLLER
Use medium nap, 12 mm, perlon or polyester rollers. For textured surfaces use long nap 14-18mm rollers.
Thinning: Absorbent mineral substrates like concrete:
CLEANING OF EQUIPMENT / SPILLS
REMARKS
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Rob on 2023-07-07 22:40:11 | Question: When applying this prior to the Rust-o-leum paint system what are the minimum and maximum times for painting, based on standard temperature, pressure and humidity? |
Answer from Rawlins’ Technical Team: At 20°C this product can be recoated or overpainted in 16hours. The product is fully cured in 7 days. | |
| DEAN JONES on 2019-06-06 20:43:38 | Question: can this primer be used on concrete prior to a resin bond drive system being laid ? |
Answer from Rawlins’ Technical Team: As Rust-Oleum have no knowledge or experience of the proposed system to be applied over their primer they would not recommend this type of use as they could offer no guarantees of it working and unfortunately we presume a trial prior to full application would not be feasible in this instance. | |
| nic excell on 2019-03-18 11:59:16 | Question: Can this be applied to existing paint containing leadwork? |
Answer from Rawlins’ Technical Team: No, it is intended to provide a good key for adhesion on bare, porous, mineral substrates prior to the application of several Rust-Oleum systems. | |
Rust-Oleum 5401 Epoxy Impregnation Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment.Strong dilution...
£21.78 (incl. VAT)
£18.15 (ex. VAT)
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system.Improves the adhesion of coating systems Neutralizes alkaline salts Also ideal to remove "white...
£67.06 (incl. VAT)
£55.88 (ex. VAT)
Rust-Oleum 5500 Solvent Free Epoxy is a high build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers.For Professional use High build coating (150 microns), very durable Suitable for frequent (chemical) cleaning Excellent resistance...
£204.20 (incl. VAT)
£170.17 (ex. VAT)
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Rust-Oleum Mathys Pegakote is an easy to apply, two-pack, water based, epoxy coating for interior floor and wall surfaces in garages, warehouses, showrooms, corridors, indoor car parks, workshops, etc. Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours New Sizes - Now Available in 5L and 10L Pack...
£147.60 (incl. VAT)
£123.00 (ex. VAT)
We no longer stock this product, but can recommend Rust-Oleum 9100 High Solids Epoxy or Rust-Oleum 9100 Winter Grade Epoxy as a great alternatives.
We no longer stock this product, but can recommend Jotun Hardtop XP as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option...
Rust-Oleum 9100 High Solids Epoxy is a higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application....
£135.82 (incl. VAT)
£113.18 (ex. VAT)
Rust-Oleum 5180 Epoxy Repair Mortar is an incredibly tough, 2 component epoxy resin mortar for repairing damaged, dished or dangerous concrete and stone floors.For Professional use Virtually indestructable Heavy traffic friendly Chemical resistant Does not shrink or crack Easy all-in-one packaging Interior/Exterior use No primer...
£23.14 (incl. VAT)
£19.28 (ex. VAT)
We no longer stock this product, but can recommend Watco Concrex Fine Filler as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113...
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish.Each kit contains:12" Roller,...
£101.58 (incl. VAT)
£84.65 (ex. VAT)
We no longer stock this product; without knowing the use of the floor, the closest alternative product we can offer is Sikafloor 3240.
